The AIMS Power Bristlecone Homestead Solar Kit Runs Medium Size Appliances and Tools With 460 Watts of Flexible Solar, a 3000 Watt Inverter and 2.5 kWh of Storage
The AIMS Power Bristlecone Homestead Solar Kit is a complete solar power system for mobile, off-grid and backup use. It combines two 230W slim flexible solar panels, a 60 amp charge controller, a 3000 watt pure sine power inverter and a 200Ah 2.5 kWh AGM battery, along with PV extender wires, battery and inverter cables and three inline fuses.
AIMS built it for do-it-yourself owners and installers who want to run medium size appliances and tools without grid power. The flexible panels suit curved roofs and installs where weight and space matter, such as overland vehicles, teardrop trailers, boats and food trucks. The system is expandable, so you can add more panels and batteries as your power needs grow.
AIMS Power Bristlecone Homestead Solar Kit Features
460 Watts of Flexible Solar for Curved Surfaces
Two 230W slim flexible panels give you 460 watts of solar. Each panel measures 62 x 32 x 0.13 inches, and the pair needs about 30 square feet of space. Because they flex, you can mount them on curved or uneven surfaces where a rigid framed panel isn't practical.
A 3000 Watt Pure Sine Inverter for Clean AC Power
The inverter is rated 3000W continuous and 6000W surge, and it puts out pure sine wave power for appliances, tools and sensitive electronics. It has two AC outlets, an A/C direct connect terminal for hardwiring, a USB port, a power switch, LED fault indicators and an optional remote port. It measures 22.25 x 9.50 x 3.50 inches and weighs 15.50 lbs.
200Ah AGM Battery Storage
The kit's AGM battery is a 12V 200Ah valve regulated deep cycle battery that stores 2.5 kWh. It holds the energy your panels collect so you can run loads after the sun goes down.
A 60 Amp Charge Controller With Cables
The 60 amp charge controller regulates solar input and protects battery performance. It comes with 6 foot cables.
Wiring and Fuses in the Box
You get 30 feet of PV extender wire to reach from the panels to the controller, 6 foot battery and inverter cables, and three inline fuses (solar, charge controller and inverter).
Expandable as Your Needs Grow
Start with 460 watts and 2.5 kWh, then add more panels and batteries when your power demands increase.
Real-World Applications
Airstreams and teardrop trailers. Fit the flexible panels to a curved roof and run AC appliances from the inverter while you camp off grid.
Overland and expedition vehicles. Add solar, storage and AC power in a kit built for weight-conscious mobile installs.
Food trucks, coffee carts and pop-up stalls. Power equipment for mobile food service and at events, festivals and markets.
Cabins and home backup. Provide primary power for a tiny home or remote hunting cabin, or back up critical loads at home during an outage.
Job sites and mobile service rigs. Charge tools at a construction site or run equipment on a mobile detailing or pressure washing rig.
Practical Comparison
Bristlecone Versus a Kit With Rigid Framed Panels
Rigid framed panels need a flat surface and brackets. The Bristlecone's slim flexible panels conform to curved roofs and keep a low profile, which suits trailers, boats and vehicles where a framed panel won't fit or adds too much weight.
Pure Sine Versus a Modified Sine Inverter
A modified sine inverter produces a stepped waveform that some appliances and electronics don't run well on. The Bristlecone's pure sine inverter puts out clean, stable power, so you can run sensitive electronics, tools and household appliances with more confidence.
AGM Battery Versus a Lithium Battery
An AGM battery is a sealed, valve regulated lead-acid design that needs no watering. A lithium battery weighs less for the same capacity. The Bristlecone ships with AGM storage, and you can expand the system with more batteries later.
Buyer Guidance
Match Your Loads to the System
Add up the watts of everything you plan to run at the same time and keep the total within the inverter's 3000W continuous rating. The 6000W surge rating covers short starting bursts. The battery stores 2.5 kWh, so heavier loads use that energy faster than light ones, and solar input helps refill it during the day.
Plan the Panel Space and Mounting
Set aside about 30 square feet for the two panels. Mounting materials for the panels aren't on the component list, so plan how you'll attach them to your roof or surface. Keep the inverter near the battery, since the battery and inverter cables are 6 feet long.
This May Be A Good Fit If
- You need AC power for medium size appliances and tools
- Your roof is curved or weight is a concern
- You want panels, inverter and battery in one kit
- You have about 30 square feet for panels
- You plan to add panels or batteries later
Common Questions
What Appliances Can the Bristlecone Run?
AIMS lists examples such as a full size microwave, a standard refrigerator, a sump pump, a deep well pump (1/2 HP), a circular saw and a small air compressor. How long you can run them depends on the load and how much charge the battery holds.
Is Everything Needed for a Working System Included?
The kit includes panels, a controller, an inverter, a battery, PV wires, battery and inverter cables and fuses. Panel mounting materials aren't listed, so plan for those separately.
Can I Hardwire the Inverter?
Yes. Besides its two AC outlets, the inverter has an A/C direct connect terminal for a hardwired connection.
Can I Expand the System Later?
Yes. AIMS designed the Bristlecone so you can add more panels and batteries as your needs grow.
What Warranty Does AIMS Give?
AIMS lists 10 years on the solar panels, 3 years on the charge controller, 5 years on the battery and 2 years on the power inverter.
What's Included
- 2 x 230W Slim Flexible Solar Panel
- 1 x 60 Amp Charge Controller With 6FT Cables
- 1 x 3000 Watt Pure Sine Power Inverter
- 1 x 200Ah 2.5 kWh AGM Battery
- 1 x Set of PV Extender Wires 30FT
- 1 x Set of Battery and Inverter Cables 6FT
- 1 x Inline Solar Fuse
- 1 x Inline Charge Controller Fuse
- 1 x Inline Inverter Fuse
Flexible Solar Power for Medium Size Loads
The AIMS Power Bristlecone Homestead Solar Kit brings 460 watts of flexible solar, a 3000 watt pure sine inverter, a 2.5 kWh AGM battery, a 60 amp controller and the wiring to connect them in one package. If you'd like help sizing your loads or planning the install, the Outbound Power team is happy to help.
AIMS Power Bristlecone Homestead Solar Kit | 460W Flexible Solar, 3000W Inverter, 2.5kWh Battery Specifications
|
| Kit Contents |
| Solar Panels |
2 x 230W slim flexible |
| Charge Controller |
1 x 60 Amp, with 6FT cables |
| Power Inverter |
1 x 3000 watt pure sine |
| Battery |
1 x 200Ah 2.5 kWh AGM |
| PV Extender Wires |
30FT |
| Battery and Inverter Cables |
6FT |
| Inline Fuses |
Solar, charge controller, inverter |
| Mounting Space Needed |
About 30 sq ft |
| Kit Weight |
200 lbs |
| Solar Panels |
| Type |
Slim flexible |
| Quantity |
2 |
| Rated Power (Each) |
230W |
| Total Solar Power |
460W |
| Dimensions (Each) |
62 x 32 x 0.13 in |
| Mounting Surfaces |
Curved or uneven surfaces |
| Inverter |
| Output Waveform |
Pure sine |
| Continuous Power |
3000W |
| Surge Power |
6000W |
| Amp Rating |
25A |
| AC Outlets |
2 |
| AC Hardwire |
A/C direct connect terminal |
| USB Port |
Yes |
| Remote |
Optional remote port |
| Indicators |
LED fault indicators |
| Dimensions |
22.25 x 9.50 x 3.50 in |
| Weight |
15.50 lbs |
| Batteries |
| Type |
AGM, valve regulated, deep cycle |
| Quantity |
1 |
| Voltage |
12V |
| Capacity |
200Ah |
| Stored Energy |
2.5 kWh |
| Charge Controller |
| Rating |
60 Amp |
| Cables |
6FT |
| Cables and Hardware |
| PV Extender Wires |
30FT |
| Battery and Inverter Cables |
6FT |
| Inline Solar Fuse |
Included |
| Inline Charge Controller Fuse |
Included |
| Inline Inverter Fuse |
Included |
| Warranty |
| Solar Panels |
10 years |
| Charge Controller |
3 years |
| Battery |
5 years |
| Power Inverter |
2 years |