Early Black Friday Price Drop Guarantee
Found the same price or less? Just ask & we'll beat it.
The AIMS Power Lynx Expedition Solar Kit (ECLYNX) is a complete entry level solar power system. It pairs a 100W slim and narrow monocrystalline solar panel with an 11 amp pre-wired weatherproof charge controller, a 12V 100Ah AGM deep cycle battery rated at 1.28 kWh and a 1000 watt pure sine inverter that is ETL listed to UL 458. Mounting brackets, PV wire extenders, an inverter fuse and inverter and battery cables round out the kit.
AIMS built the Lynx for RVs, vans, buses and small standalone systems that need dependable off-grid power with minimal complexity. The narrow panel suits camper vans and space-constrained rigs, and the kit works for keeping batteries maintained during travel or storage or for adding light off-grid capability.
The PV100MLONG panel measures 43 7/8 x 17 7/8 x 1 1/8 inches and weighs 13 lb, so it fits narrow rooflines where a wider panel won't. It's rated at 100 watts with 19.8% module efficiency, a tempered glass front, an IP65 junction box and MC4 compatible connectors on 24 inch cables. AIMS says to plan on 8 square feet for the panel.
The 11 amp charge controller comes pre-wired with its cables attached, which AIMS says speeds up installation. It's built to handle outdoor conditions, and LED indicators show its status at a glance. The controller's label reads 11A and 12V.
The AGM12V100A is a sealed, valve regulated 12V 100Ah deep cycle battery that AIMS rates at 1.28 kWh. AIMS's spec sheet lists a 30A maximum charging current, a cycle use charge voltage of 14.6 to 14.8V at 25°C and extra thick plates built for repeated charge and discharge cycles.
The inverter delivers 1000 watts continuous with a 2000 watt surge, and AIMS describes it as a 1000 watt, 8A pure sine unit. It provides stable power for small appliances, tools and sensitive electronics. The front panel has two AC outlets, a USB port, a remote on/off port and a power button with protect and power indicator lights.
AIMS includes 25 ft PV wire extenders, an inverter fuse, 6 ft inverter cables, 6 ft battery cables and mounting brackets for the panel, and provides a wiring diagram upon purchase. Every component is selected to work together, which cuts installation time and compatibility questions.
Camper vans and small campers. AIMS lists the core necessities of a small camper setup, off-grid refrigeration and small kitchen amenities among the common uses.
Mobile tech and field offices. Run a gaming laptop, desktop computer, Starlink or laser printer from a van or field office.
Food carts and pop-up retail. AIMS names food carts, pop-up retail, mobile pet grooming and detailers as good matches for the Lynx.
Tool charging and field equipment. AIMS lists cordless power tool charging stations, field engineering and testing equipment and on-site small machinery.
Battery maintenance in storage. The panel keeps the battery charged while your RV or van sits between trips.
A standard width panel can be hard to place on a van roof crowded with vents, racks and fans. The Lynx panel is just under 18 inches wide, so it fits narrow strips of roof that a wider panel can't use.
A modified sine inverter produces a stepped waveform. The Lynx's inverter puts out a pure sine wave, which AIMS describes as clean, stable electricity for sensitive electronics, small appliances and tools.
Building a system from separate parts means matching the panel, controller, battery, inverter, cables and fuse yourself. AIMS selects the Lynx components to work together, so you skip the compatibility research.
Add up the wattage of everything you plan to run at the same time and keep it under the inverter's 1000 watt continuous rating. AIMS lists a small drip coffee maker, electric tea kettle, mini rice cooker, 3-quart slow cooker, single hot plate, 2-slice toaster, 40 to 50 inch LED TV, electric blanket, handheld vacuum, CPAP and small medical devices among common uses. Higher draw items like a hot plate or kettle will use the battery faster, and how long anything runs depends on its draw and the battery's charge.
AIMS positions the Lynx for light-duty and entry level use. A single 100W panel keeps the battery topped up during travel and storage, so plan heavy loads for short periods and recharge between uses.
AIMS says to plan on 8 square feet. The panel itself measures 43 7/8 x 17 7/8 x 1 1/8 inches.
Yes. AIMS lists the 1000 watt pure sine inverter as ETL listed to UL 458.
One AIMS AGM12V100A 12V 100Ah AGM deep cycle battery rated at 1.28 kWh, with 6 ft battery cables. The spec sheet lists a weight of approximately 29.0 kg and dimensions of 12.9 x 6.77 x 8.46 inches.
AIMS provides a wiring diagram upon purchase. The Outbound Power team can also answer wiring questions before you install.
The AIMS Power Lynx Expedition Solar Kit brings a slim 100W panel, a pre-wired 11 amp controller, a 1.28 kWh AGM battery and a 1000 watt pure sine inverter together in one matched system. If you'd like help checking your loads, planning the install or reading the wiring diagram, the Outbound Power team is happy to help.
AIMS Power Lynx Expedition Solar Kit | 100W Slim Solar, 1000W Inverter, 1.28kWh AGM Battery Specifications |
|
|---|---|
| Kit Contents | |
| Solar Panel | 1 x 100W Slim and Narrow Solar Panel (PV100MLONG) |
| Mounting Brackets | Mounting brackets for solar panel |
| Charge Controller | 1 x 11 Amp Pre-Wired Weatherproof Solar Charge Controller |
| Battery | 1 x AGM12V100A 12V 100Ah AGM Deep Cycle Battery, 1.28 kWh |
| Inverter | 1 x 1000 Watt Pure Sine Inverter, ETL listed to UL 458 |
| PV Wire | 25 ft PV wire extenders |
| Inverter Fuse | Included |
| Inverter Cables | 6 ft |
| Battery Cables | 6 ft |
| Wiring Diagram | Provided upon purchase |
| Panel Space Needed | 8 sq ft |
| Solar Panels | |
| Model | PV100MLONG |
| Quantity | 1 |
| Maximum Power (Pmax) | 100W |
| Voltage at Maximum Power (Vmp) | 17.3V |
| Current at Maximum Power (Imp) | 5.79A |
| Open Circuit Voltage (Voc) | 20.23V |
| Short Circuit Current (Isc) | 6.29A |
| Module Efficiency | 19.8% |
| Power Tolerance | 0/+5W |
| Cell Type | Monocrystalline, 2 x 15 cells |
| Front Material | Tempered glass |
| Junction Box | IP65 |
| Connector | MC4 compatible |
| Cable Length | 24 in |
| Maximum System Voltage | 600VDC |
| Maximum Series Fuse | 10A |
| Operating Temperature | -40°C to +85°C |
| NOCT | 45±2°C |
| Temperature Coefficient of Pmax | -0.38%/°C |
| Temperature Coefficient of Voc | -0.29%/°C |
| Temperature Coefficient of Isc | 0.05%/°C |
| Dimensions | 43 7/8 x 17 7/8 x 1 1/8 in |
| Weight | 13 lb |
| Charge Controller | |
| Rating | 11 Amp |
| Battery Voltage | 12V (per unit label) |
| Wiring | Pre-wired, cables attached |
| Enclosure | Weatherproof |
| Indicators | LED |
| Batteries | |
| Model | AGM12V100A |
| Type | AGM deep cycle, valve regulated lead acid (VRLA) |
| Quantity | 1 |
| Voltage | 12V |
| Cells | 6 |
| Capacity | 100Ah at 20 hr rate to 1.75V per cell at 25°C |
| Energy | 1.28 kWh |
| Cycle Use Voltage | 14.6-14.8V at 25°C |
| Float Charging Voltage | 13.6-13.8V at 25°C |
| Maximum Charging Current | 30.0A |
| Maximum Discharge Current | 1000A (5 sec) |
| Internal Resistance | Approx. 5.0 mΩ |
| Terminal | F12 (M8) / F5 (M8) |
| Discharge Temperature | -20°C to 60°C |
| Charge Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Self Discharge | Less than 3% per month at 25°C |
| Container Material | A.B.S. UL94-HB (UL94-V0 optional) |
| Design Life | 12 years (floating charge) |
| Dimensions | 328 x 172 x 215 mm (12.9 x 6.77 x 8.46 in) |
| Total Height | 220 mm (8.66 in) |
| Weight | Approx. 29.0 kg |
| Cables | 6 ft |
| Inverter | |
| Model | PWRI100012120S |
| Continuous Power | 1000W |
| Surge Power | 2000W |
| Amp Rating | 8A |
| Waveform | Pure sine |
| DC Input | 12V |
| AC Output | 120VAC, 60Hz |
| AC Outlets | 2 |
| USB Port | 1 |
| Remote Port | Remote on/off |
| Certification | ETL listed to UL 458 |
| Cables | 6 ft |
| Cables and Hardware | |
| PV Wire Extenders | 25 ft |
| Inverter Fuse | Included |
| Inverter Cables | 6 ft |
| Battery Cables | 6 ft |
| Mounting Brackets | Included for the solar panel |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder
