The AIMS Power Razorback Expedition Solar Kit Puts a 130W Flexible Panel, a 600W Pure Sine Inverter and 1.28 kWh of Battery Storage on Curved Roofs
The AIMS Power Razorback Expedition Solar Kit (ECRAZORBACK) is a complete small solar system built around a 130W slim flexible solar panel. AIMS pairs the panel with a 20 amp charge controller, a 600W pure sine inverter and one 12V 100Ah AGM deep cycle battery rated at 1.28 kWh, then adds the fuses, PV wire and MC4 entry gland you need to connect it all.
AIMS built the Razorback for light loads, quick installs and surfaces where a rigid panel won't sit flat. It suits teardrop campers, camper vans, overland rigs, boats and work vehicles that need power for laptops, phones, lights, CPAP machines and other low-draw devices.
AIMS Power Razorback Expedition Solar Kit Features
A Slim Flexible Panel Fits Curved and Uneven Surfaces
The 130W slim flexible solar panel conforms to curved or uneven surfaces where traditional panels won't work, such as van roofs, teardrop shells, tents and boats. AIMS notes that it delivers consistent solar charging without adding bulk. Plan on about 8 square feet of space for the panel.
Stored Power After the Sun Goes Down
The included 12V 100Ah AGM deep cycle battery stores 1.28 kWh, so you aren't limited to daylight hours. It's a valve regulated rechargeable battery, and it comes with 5 ft cables. AIMS notes that additional batteries may be added later if your needs grow.
Clean AC Power From a 600W Pure Sine Inverter
The 600W pure sine inverter turns battery power into clean, stable AC power for sensitive electronics like laptops, phones, CPAP machines and small appliances. Its label lists 600W continuous and 1200W surge, a 120VAC 60Hz 5A output and a 5VDC 2.1A USB output. AIMS's photos show two AC outlets, a remote on/off port and a cooling fan. The inverter comes with 8 ft cables.
Solar Trickle Charging Keeps the Battery Ready
The 20 amp charge controller manages charging from the panel to the battery. AIMS describes the panel as keeping your battery topped off with a steady trickle charge between trips, so the system is ready for your next outing. The controller has an LCD screen, PV input, battery input and DC load ports, and two USB ports.
Fuses, Wiring and an Entry Gland Come in the Box
The kit includes an inverter to battery fuse, a charge controller to battery fuse and a solar fuse. You also get an entry gland with MC4 connectors and 10 ft leads, plus 15 ft PV wire extenders with bare ends.
Real-World Applications
Teardrop and pop-up campers. The flexible panel follows a curved trailer roof, and the battery and inverter run lights, a fan and small electronics at camp.
Class B camper vans. AIMS lists minimalist van builds among the common uses.
Overland rigs and roof tents. Mount the panel on a truck bed rack or roof tent and keep phones, a laptop and a CPAP charged off-grid.
Work trucks and mobile trades. AIMS names field technician and supervisor trucks, mobile mechanics and electricians, and utility and traffic control vehicles as good matches for this kit.
Small mobile businesses. Use it as an auxiliary system on a food truck or trailer, or to power a pop-up retail booth or mobile boutique.
Practical Comparison
Razorback Versus a Rigid Framed Panel Kit
A rigid framed panel needs a flat spot and mounting hardware. The Razorback's slim panel bends to fit curved or uneven surfaces, so it works on teardrops, vans, tents and boats where AIMS notes rigid panels aren't practical.
Pure Sine Inverter Versus a Modified Sine Inverter
A modified sine inverter produces a stepped waveform. The Razorback's 600W inverter puts out a pure sine wave, which AIMS describes as clean, stable AC power for sensitive electronics such as laptops and CPAP machines.
Complete Kit Versus Buying Parts Separately
Building a system from separate parts means matching the panel, controller, inverter, battery, fuses and wire yourself. The Razorback arrives as a pre-matched system with those parts included, which reduces sourcing and compatibility questions and saves time on the install.
Buyer Guidance
Keep Your Loads Within 600W
The inverter is rated 600W continuous with a 1200W surge. Add up the wattage of everything you plan to run at the same time and keep it under the continuous rating. AIMS lists a laptop, LED monitors, Starlink Standard or Mini, LED studio lighting, an inkjet printer, a mini rice cooker, a 3-quart slow cooker, a personal blender, an electric heated blanket, a desktop fan and a dehumidifier among common uses. How long each one runs depends on its draw and how charged the battery is.
Battery Care and Expansion
The AGM battery's label lists a constant voltage charge of 14.4 to 14.7V for cycle use and an initial charging current of less than 30A. AIMS notes that additional batteries may be added. If you plan to expand, talk with the Outbound Power team first so the new battery matches the system.
This May Be A Good Fit If
- You have a curved roof on a teardrop, van or camper
- You run laptops, phones, lights or a CPAP machine
- You want the battery and inverter included
- You have about 8 square feet for the panel
Common Questions
How Much Space Does the Solar Panel Need?
AIMS says you need about 8 square feet for the 130W slim flexible solar panel.
What Can the 600W Inverter Run?
AIMS designed it for laptops, phones, small electronics, CPAP machines and small appliances. Keep the combined load under 600W continuous. The inverter's label lists a 1200W surge rating.
What Type of Battery Is Included?
One 12V 100Ah AGM deep cycle battery with a capacity of 1.28 kWh. It's a valve regulated rechargeable battery and comes with 5 ft cables.
Can I Add More Batteries Later?
Yes. AIMS notes that additional batteries may be added to the Razorback. The Outbound Power team can help you choose a battery that fits your setup.
Is Everything Needed to Wire the System Included?
Yes. AIMS includes inverter and battery cables, three fuses, an entry gland with 10 ft leads and 15 ft PV wire extenders with bare ends.
What's Included
- 1 x 130W Slim Flexible Solar Panel
- 1 x 20 Amp Charge Controller
- 1 x 600W Pure Sine Inverter (5A) With 8FT Cables
- 1 x 12V 100Ah AGM Deep Cycle Battery 1.28 kWh With 5FT Cables
- 1 x Inverter to Battery Fuse
- 1 x Charge Controller to Battery Fuse
- 1 x Solar Fuse
- 1 x Entry Gland With MC4 Connectors and 10FT Leads
- 1 x Set of 15FT PV Wire Extenders With Bare Ends
Lightweight Solar Power for Small Mobile Setups
The AIMS Power Razorback Expedition Solar Kit brings together a 130W slim flexible panel, a 20 amp charge controller, a 600W pure sine inverter and a 1.28 kWh AGM battery with the fuses and wiring to connect them. If you'd like help checking your loads, planning panel placement or adding a battery, the Outbound Power team is happy to help.
AIMS Power Razorback Expedition Solar Kit | 130W Flexible Solar, 600W Inverter, 1.28kWh AGM Battery Specifications
|
| Kit Contents |
| Solar Panel |
1 x 130W Slim Flexible Solar Panel |
| Charge Controller |
1 x 20 Amp Charge Controller |
| Inverter |
1 x 600W Pure Sine Inverter (5A) with 8 ft cables |
| Battery |
1 x 12V 100Ah AGM Deep Cycle Battery 1.28 kWh with 5 ft cables |
| Fuses |
Inverter to battery fuse, charge controller to battery fuse, solar fuse |
| Entry Gland |
1 x Entry Gland with MC4 connectors and 10 ft leads |
| PV Wire |
15 ft PV wire extenders with bare ends |
| Panel Space Needed |
About 8 sq ft |
| Solar Panels |
| Rated Power |
130W |
| Panel Type |
Slim flexible |
| Quantity |
1 |
| Mounting Surface |
Conforms to curved or uneven surfaces |
| Charge Controller |
| Rating |
20 Amp |
| Display |
LCD |
| Ports |
PV input, battery input, DC load port |
| USB Ports |
2 |
| Dimensions |
6.50 x 3.65 x 1.25 in |
| Weight |
0.5 lbs |
| Inverter |
| Continuous Power |
600W |
| Surge Power |
1200W |
| Waveform |
Pure sine |
| DC Input |
12V DC, 60A |
| AC Output |
120VAC, 60Hz, 5A |
| AC Outlets |
2 |
| USB Output |
5VDC, 2.1A |
| Remote Port |
Remote on/off |
| Cooling |
Fan |
| Cables |
8 ft |
| Batteries |
| Model |
AGM12V100A |
| Type |
AGM deep cycle, valve regulated |
| Quantity |
1 |
| Voltage |
12V |
| Capacity |
100Ah |
| Energy |
1.28 kWh |
| Charge Voltage (Cycle Use) |
14.4-14.7V |
| Initial Charging Current |
Less than 30A |
| Cables |
5 ft |
| Expansion |
Additional batteries may be added |
| Cables and Hardware |
| Inverter to Battery Fuse |
Included |
| Charge Controller to Battery Fuse |
Included |
| Solar Fuse |
Included |
| Entry Gland |
MC4 connectors, 10 ft leads |
| PV Wire Extenders |
15 ft, bare ends |