Early Black Friday Price Drop Guarantee
Found the same price or less? Just ask & we'll beat it.
The AIMS Power Sawtooth Sentinel Solar Kit is a complete solar power system from AIMS's Sentinel Class. It pairs two 200 watt N-type monocrystalline solar panels with mounting brackets, a 30 amp PWM charge controller, two AGM 12V 200 amp batteries for 5.12 kWh of storage, and a 3000 watt pure sine low frequency inverter charger with a 50 amp bypass and built-in transfer switch. An entry gland, PV wire, an inline solar fuse and two system fuses complete the kit.
AIMS designed the Sawtooth for do-it-yourself owners and installers who need dependable backup or mobile power for RVs, vans, buses and small standalone systems. It runs larger appliances from the batteries off grid, then switches to shore or grid power when it's available while the panels keep the batteries charged.
The 3000 watt, 25 amp pure sine inverter charger powers appliances from the batteries and charges them from grid or generator power. It switches automatically between battery power and grid or shore power, and its 120/240V input with a 50A bypass and transfer switch supports full RV 50 amp service.
The integrated 50A transfer capability also lets you feed a subpanel of critical loads at home during outages, so the same kit can serve an RV or a home backup system.
Two AIMS AGM12V200A 12V 200Ah batteries add up to 400Ah and 5.12 kWh. They are sealed, valve regulated and maintenance-free with no water filling, and they can be mounted in any orientation. AIMS notes that more batteries can be added for longer run time.
AIMS chose a dual N-type panel design to maximize solar input where roof or mounting space is limited, without needing a large surface area. Each PV200MONO panel is rated 200W, measures 49.2 x 30.12 x 1.18 inches, weighs 21 lbs and has tempered glass, an IP67 junction box and 31.5 inch MC4 compatible leads. The pair needs about 20 square feet.
The SCC30APWM charge controller uses 3-stage bulk, boost and float charging and supports sealed, gel, AGM, flooded and LiFePO4 lithium battery settings. It has an LCD display, a DC load port, battery temperature compensation and a 5VDC 1A USB port with short circuit protection.
A 300A battery to inverter fuse, a 50A charge controller to battery fuse and an inline solar fuse protect the main connections. The kit also includes an MC4 type entry gland for the PV wiring.
RVs, vans and boats. Support extended boondocking in camper vans, Class B and C motorhomes and travel trailers, or power marine vessels, liveaboard sailboats and cruisers.
Home backup. Keep high-surge critical loads such as full-size refrigerators, sump pumps and CPAP machines running during outages.
Cabins and farms. Power small off-grid cabins, tiny homes and hunting lodges with weekend use, or well pumps, automatic gates and barn lighting.
Work and mobile businesses. Run mobile work trucks and service rigs, jobsite stations for charging tool fleets and running corded saws, espresso carts, food kiosks and grooming or detailing vans.
Emergency and remote sites. Supply disaster relief command posts, first-responder communications vans, radio repeaters and environmental monitoring equipment.
A stand-alone inverter only turns battery power into AC power. The Sawtooth's inverter charger also recharges the batteries from grid or generator power and moves your loads between battery and shore or grid power automatically.
Flooded batteries need their water checked and topped up. The Sawtooth's AGM batteries are sealed and maintenance-free with no water filling, and AIMS says they can be mounted in any orientation.
Building a mobile system yourself means matching panels, a controller, batteries, an inverter charger, fuses and wiring. AIMS bundles compatible components in the Sawtooth so you skip the guesswork of sourcing parts one by one.
Keep everything you run at once within 3000 watts. AIMS lists examples such as a dishwasher, washing machine, full-size microwave, standard refrigerator, large window AC unit, small point-of-use water heater, space heater, electric kettle, 1/2 HP deep well pump, sump pump, table or circular saw and small air compressor. How long you can run them depends on the total load and the batteries' charge.
Allow about 20 square feet for the two panels, plus space for the batteries, controller and inverter charger. AIMS's manual says to keep the charge controller's airflow clear and check its terminals for tightness and corrosion during maintenance.
Yes. AIMS says the integrated 50A bypass and transfer switch supports full RV 50 amp service.
AIMS states that more batteries can be added for longer run time.
The kit includes a 30 amp PWM charge controller with an LCD display, a DC load port and a USB port.
The kit includes a 300A battery to inverter fuse, a 50A charge controller to battery fuse and an inline solar fuse.
The AIMS Power Sawtooth Sentinel Solar Kit combines two N-type solar panels, 5.12 kWh of sealed AGM storage and a 3000 watt inverter charger with 50A transfer for RVs, vans and home backup. If you'd like help sizing your loads or planning the install, the Outbound Power team is happy to help.
AIMS Power Sawtooth Sentinel Solar Kit | 400W Solar, 3000W Inverter Charger, 5.12kWh AGM Battery Specifications |
|
|---|---|
| Kit Contents | |
| Solar Panels | 2 x 200 Watt N-type |
| Mounting Brackets | For solar panels |
| Charge Controller | 1 x 30 Amp PWM |
| Batteries | 2 x AGM12V 200 amp, 400 amp total, 5.12 kWh |
| Battery to Inverter Fuse | 300A |
| Inline Solar Fuse | 1 |
| Charge Controller to Battery Fuse | 50A |
| PV Wires | For complete kit |
| Entry Gland | MC4 type |
| Inverter Charger | 1 x 3000 Watt, 120/240V input, 50A transfer |
| Mounting Space Needed | About 20 sq ft |
| Solar Panels | |
| Model | PV200MONO |
| Cell Type | N-type mono cell, (2x17)x2 |
| Quantity | 2 |
| Maximum Power (Pmax, Each) | 200 W |
| Total Solar Power | 400 W |
| Voltage at Maximum Power (Vmp) | 21.1V |
| Current at Maximum Power (Imp) | 9.73A |
| Open Circuit Voltage (Voc) | 24.48V |
| Short Circuit Current (Isc) | 10.21A |
| Power Tolerance | +/- 5W |
| Maximum System Voltage | 1000V DC |
| Maximum Series Fuse | 15A |
| Operating Temperature | -40°C to +85°C (-40°F to 185°F) |
| Dimensions (Each) | 49.2 x 30.12 x 1.18 in |
| Weight (Each) | 21 lbs |
| Front Material | Tempered glass |
| Junction Box | IP67 |
| Connector | MC4 compatible, 31.5 in |
| Inverter Charger | |
| Type | Low frequency pure sine inverter charger |
| Continuous Power | 3000 Watt |
| Amp Rating | 25 Amp |
| AC Input | 120/240V |
| Bypass and Transfer | 50A, built-in transfer switch |
| Charging Sources | Grid or generator |
| Switching | Automatic between battery and grid or shore power |
| Batteries | |
| Model | AGM12V200A |
| Type | AGM, sealed, valve regulated, maintenance-free |
| Quantity | 2 |
| Voltage and Capacity (Each) | 12V 200Ah (20 hr) |
| Bank | 400Ah, 5.12 kWh |
| Max Charging Current (Each) | 60A |
| Charge Voltage, Cycle Use | 2.40-2.45 V per cell |
| Charge Voltage, Standby Use | 2.20-2.30 V per cell |
| Operating Temperature | Discharge -20 to 60°C, charge -10 to 60°C |
| Dimensions (Each) | 20.55 x 9.37 x 8.58 in (8.78 in total height) |
| Weight (Each) | 138.9 lbs |
| Mounting | Any orientation |
| Expansion | More batteries can be added for longer run time |
| Charge Controller | |
| Model | SCC30APWM |
| Charging Type | PWM, 3-stage (bulk, boost, float) |
| System Voltage | 12V/24V |
| Max Charging Current | 30A |
| Max Discharging Current | 30A |
| Battery Types | Sealed lead, gel, AGM, flooded, LiFePO4, Li(NiCoMn)O2, user |
| Float Voltage | 13.8V (adjustable 13V-15V), x2 for 24V |
| Boost Voltage | 14.4V (adjustable 13V-17V), x2 for 24V |
| Display | LCD |
| USB Output | 5VDC 1A, short circuit protected |
| DC Load Port | Yes |
| Temperature Compensation | -24 mV/°C for 12V system |
| Protection | Reverse connection, load over current, controller over voltage, current and temperature, battery over voltage 16.5V |
| Working Temperature | -20°C to 55°C |
| Dimensions | 8 x 3.85 x 2 in |
| Weight | 1 lb |
| Terminals | 16mm² |
| Cables and Hardware | |
| Mounting Brackets | For solar panels |
| Entry Gland | MC4 type |
| PV Wires | For complete kit |
| Inline Solar Fuse | Included |
| Battery to Inverter Fuse | 300A |
| Charge Controller to Battery Fuse | 50A |
| Warranty | |
| Kit | 2-25 years, product specific |
| Charge Controller | 2 years from date of purchase |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder
