Early Black Friday Price Drop Guarantee
Found the same price or less? Just ask & we'll beat it.
The AIMS Power Tungsten Pro Solar Kit is a complete 48 volt DC solar power system built around a large solar array. Twelve 555 watt monocrystalline panels produce 6650 watts and feed two combiner boxes, a quick disconnect switch and two 80 amp charge controllers. They charge two 48V lithium iron phosphate (LiFePO4) batteries for 21.2 kWh of storage, and a 12000 watt, 100/50 amp low frequency inverter charger with an integrated transfer switch delivers 120/240V split-phase power.
AIMS designed the Tungsten for do-it-yourself owners and installers with high daily power demand: large homes, ranches, commercial sites, remote properties and backup systems that need continuous power availability. The oversized array is meant to keep up with heavy daily use and refill the batteries quickly.
Twelve 555 watt monocrystalline panels give the Tungsten 6650 watts of charging power. AIMS sized the array to replenish the battery bank faster, keep up with substantial daily demand and cut recharge time. Each panel measures 89.75 x 44.75 x 1.37 inches and weighs 60 lbs, and the full array needs about 338 square feet.
The kit includes two PV combiner boxes for easier solar installation and two 80 amp charge controllers with 8 foot cables, along with two 100A charge controller to battery fuses. The combiner boxes come with connectors.
The 12000 watt, 48V DC inverter charger delivers consistent 120/240V split-phase output with true 50 amp service capability for heavy appliances, pumps, motors and HVAC systems. It has an LED status screen, circuit breakers, AC outlets and an AC hardwire terminal block, plus ports for auto generator start, a battery temperature sensor and an LCD remote. It measures 23.3 x 16.3 x 8.0 inches, weighs 154 lbs and comes with 8 foot cables.
Two 48V LiFePO4 batteries, joined with the included jumpers, make up the 21.2 kWh bank. AIMS says the bank offers faster charging, improved efficiency, deeper usable capacity and extended cycle life compared with traditional battery systems. Each battery has an on/off switch, state of charge lights, alarm and run lights, and CAN and RS485 communication ports.
The 48 volt DC configuration reduces current draw and minimizes voltage loss, which supports efficient high output inverter performance on a large off-grid system.
The quick disconnect switch is a PV array DC isolator marked IP66, with two input and two output connector pairs, so you can isolate the solar array for servicing. A 300A battery to inverter fuse protects the main battery connection.
Large homes and ranches. Power large off-grid homes, homesteads and ranches with high daily power demand.
Whole-home backup. Back up whole homes, including central air and 240V appliances.
Farms and greenhouses. Supply heavy well pumps, greenhouse climate control and automated feeding systems.
Commercial work sites. Support off-grid workshops with welders, plasma cutters and large air compressors, or multi-crew tool charging on construction sites.
Remote and critical facilities. Power eco-resorts, off-grid communities, remote telecom and server hubs, or disaster relief command centers.
A smaller array can leave a large battery bank short after a day of heavy use. The Tungsten's 6650 watt array is sized to replenish the bank faster and keep up with substantial daily demand.
Traditional lead-acid batteries are a familiar option, but AIMS chose LiFePO4 for the Tungsten for faster charging, improved efficiency, deeper usable capacity and extended cycle life.
A lower voltage system draws more current for the same power, which means heavier wiring and more voltage loss. The Tungsten's 48 volt design reduces current draw for its 12000 watt inverter charger.
Total the equipment you plan to run at the same time, including motors and compressors with high startup demand, and keep it within the inverter charger's 12000 watt rating. The 21.2 kWh bank sets your stored energy after dark, and the large array is there to refill it during the day.
The twelve 555 watt panels need about 338 square feet, each panel weighs 60 lbs, and the full kit weighs about 600 lbs. Plan where the two combiner boxes, two controllers, disconnect, batteries and inverter charger will mount before you run the 100 feet and 20 feet of PV wire.
The Tungsten includes two 80 amp charge controllers with 8 foot cables, two combiner boxes and two 100A charge controller to battery fuses.
AIMS lists central air, 240V appliances, heavy well pumps, welders, plasma cutters, large air compressors and other heavy loads among its uses. What you can run at once, and for how long, depends on your total load and the battery's charge.
You get two 48V lithium iron phosphate batteries with jumpers, for a 21.2 kWh bank.
The kit includes one 300A battery to inverter fuse and two 100A charge controller to battery fuses.
The AIMS Power Tungsten Pro Solar Kit combines a 6650 watt solar array, 21.2 kWh of LiFePO4 storage and a 12000 watt split-phase inverter charger with true 50 amp service in one 48 volt system. If you'd like help sizing your loads or planning the array, the Outbound Power team is happy to help.
AIMS Power Tungsten Pro Solar Kit | 6650W Solar, 12000W 48V Inverter Charger, 21.2kWh LiFePO4 Battery Specifications |
|
|---|---|
| Kit Contents | |
| Solar Panels | 12 x 555 Watt monocrystalline |
| Combiner Boxes | 2 |
| Charge Controllers | 2 x 80 Amp, with 8ft cables |
| Batteries | 2 x 48V lithium, with jumpers |
| Battery Bank | 21.2 kWh total |
| Inverter Charger | 1 x 12000 Watt, 100/50 Amp, 120/240VAC, 48V DC, transfer switch, 8ft cables |
| Quick Disconnect Switch | 1 |
| Battery to Inverter Fuse | 1 x 300A |
| Charge Controller to Battery Fuses | 2 x 100A |
| PV Wires | 100Ft and 20Ft |
| Mounting Space Needed | About 338 sq ft |
| Kit Weight | 600 lbs |
| Solar Panels | |
| Model | PV555MONO |
| Type | Monocrystalline |
| Quantity | 12 |
| Rated Power (Each) | 555 Watt |
| Total Solar Power | 6650 Watt |
| Dimensions (Each) | 89.75 x 44.75 x 1.37 in |
| Weight (Each) | 60 lbs |
| Inverter Charger | |
| Type | LF (low frequency) inverter charger |
| Power Rating | 12000 Watt |
| Amp Rating | 100/50 Amp |
| DC Input | 48V DC |
| AC Output | 120/240VAC split phase |
| Service | True 50 amp split phase |
| Transfer Switch | Integrated |
| Display | LED status screen |
| AC Connections | 2 AC outlets plus hardwire terminal block, circuit breakers |
| Ports | Auto generator start, battery temperature sensor, LCD remote |
| Cooling | Intelligent cooling fans |
| Dimensions | 23.3 x 16.3 x 8.0 in |
| Weight | 154 lbs |
| Cables | 8ft |
| Batteries | |
| Chemistry | Lithium iron phosphate (LiFePO4) |
| Quantity | 2 |
| Voltage (Each) | 48V |
| Bank Energy | 21.2 kWh |
| Connection | Jumpers included |
| Controls and Indicators | On/off switch, state of charge lights, alarm and run lights |
| Communication Ports | CAN, RS485 |
| Charge Controller | |
| Rating (Each) | 80 Amp |
| Quantity | 2 |
| Cables | 8ft |
| Cables and Hardware | |
| Combiner Boxes | 2 x PV combiner box, connectors included |
| Quick Disconnect Switch | PV array DC isolator, 2 input and 2 output connector pairs |
| Disconnect Marking | IP66 |
| PV Wires | 100Ft and 20Ft |
| Battery to Inverter Fuse | 300A |
| Charge Controller to Battery Fuses | 2 x 100A |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder
