Early Black Friday Price Drop Guarantee
Found the same price or less? Just ask & we'll beat it.
The AIMS Power Wolf Spider Frontier Solar Kit is a solar base kit that bundles the core parts you need to charge and maintain batteries with sunlight. It includes one 200 watt N-type monocrystalline solar panel, mounting brackets, a 30 amp PWM solar charge controller, an inline solar fuse, an MC4 type entry gland and 15 feet of PV wire to run from the entry gland to the controller.
AIMS designed it for RVs, vans, buses and other compact solar setups, and for anyone who wants a simple starting point for a small system. It suits small battery systems, light device use and short trips. Batteries and an inverter aren't included, but you can add them later to build a complete off-grid system.
The kit's PV200MONO panel uses N-type mono cells behind a tempered glass front, with a rated module efficiency of 25%. It produces 21.1V at maximum power (Vmp) and 9.73A at maximum power (Imp). The panel measures 49.2 x 30.12 x 1.18 inches and weighs 21 lb. Plan for about 10 square feet of mounting space.
The junction box is rated IP67, and AIMS lists an operating temperature range of -40°F to 185°F (-40°C to +85°C). MC4 compatible connectors on 31.5 inch leads come off the back of the panel. The included mounting brackets let you secure the panel to a roof or other surface.
The MC4 type entry gland gives the panel leads a place to connect where the wiring enters the vehicle, and the 15 foot PV wires run from the entry gland to the charge controller.
The SCC30APWM controller charges in three stages (bulk, boost and float) and handles up to 30A of charging current. It supports sealed lead-acid, gel, flooded, LiFePO4 and Li(NiCoMn)O2 batteries, plus a user setting. A temperature sensor provides battery temperature compensation, and the controller works in 12V or 24V systems.
An LCD shows real-time system information, and two buttons handle settings. A USB port gives 5VDC/1A with short circuit protection for charging small devices. The DC load port can run a load around the clock or switch it on after sunset for a set number of hours using light and timer control.
The controller protects against PV short circuit, PV reverse polarity, battery reverse polarity, night reverse charging, battery over voltage and over discharge, and load overload and short circuit. If its internal temperature goes above 85°C, it stops working and restarts once it cools below 65°C.
When you're ready, add batteries and an inverter to build a complete portable or off-grid solar power system.
Camper vans and Class B motorhomes. Add daytime charging to keep up with 12V fridges and fans.
Overland rigs and travel trailers. Extend how long you can boondock off grid before your batteries run low.
Small boats and sailboats. Supplement a house battery bank that runs marine electronics.
Tiny homes and weekend cabins. Charge a battery for basic LED lighting and device charging.
Work trucks and farm sites. Keep the batteries charged that recharge cordless tool packs between jobs, or that run mid-sized livestock water pumps and automated feeders.
A flexible panel kit bends to fit curved roofs and keeps a low profile. The Wolf Spider uses a rigid panel with a tempered glass front and mounting brackets, which suits flat roofs, racks and other surfaces where you want the panel held firmly in place.
An MPPT controller is built to work with a wider range of panel voltages. A PWM controller like the one in this kit keeps things simple and works when the panel wiring matches the battery voltage, as the wiring table in the controller manual shows.
A complete system adds batteries and an inverter for AC power. The Wolf Spider covers the charging side only, so it fits setups that already have batteries, or a build where you want to add storage and an inverter in steps.
The controller manual says to connect the battery first, then the PV array, then the load, and to disconnect in reverse order. Connect an inverter directly to the battery, never to the controller's load port, since using the wrong port voids the warranty. The manual also says to add breakers or fuses to solar, battery and load, with the battery fuse as close to the battery as possible (within 6 inches is suggested). The kit includes an inline solar fuse.
Install the controller out of direct sunlight, away from high heat and where it can't get wet, with good ventilation. If it goes in an enclosed box, make sure heat can escape. Check the PV module wiring table in the manual to confirm the panel matches your battery voltage.
No. It's a solar base kit with the charging components. You can add batteries and an inverter to build a complete system.
The controller supports sealed lead-acid, gel, flooded, LiFePO4 and Li(NiCoMn)O2 batteries, plus a user setting, in 12V or 24V systems. You choose the battery type through the LCD menu.
No. Connect an inverter directly to the battery. The manual notes that connecting it to the controller's load port voids the warranty.
Plan for about 10 square feet. The panel measures 49.2 x 30.12 x 1.18 inches.
AIMS lists the kit warranty as 2 to 25 years, depending on the component. The charge controller manual gives a 2 year warranty from the date of purchase.
The AIMS Power Wolf Spider Frontier Solar Kit brings a 200 watt N-type panel, a 30 amp PWM controller, brackets, an entry gland, a fuse and PV wire together in one package. If you'd like help matching the kit to your battery or planning a larger system, the Outbound Power team is happy to help.
AIMS Power Wolf Spider Frontier Solar Kit | 200W Solar, 30A Charge Controller Specifications |
|
|---|---|
| Kit Contents | |
| Solar Panel | 1 x 200 Watt N-type (PV200MONO) |
| Mounting Brackets | 1 set |
| Charge Controller | 1 x 30 Amp PWM (SCC30APWM) |
| Inline Solar Fuse | 1 |
| Entry Gland | 1 x MC4 type |
| PV Wires | Entry gland to charge controller, 15 ft |
| Mounting Space Needed | About 10 sq ft |
| Kit Weight | 95 lbs |
| Solar Panel | |
| Maximum Power (Pmax) | 200 W |
| Voltage at Maximum Power (Vmp) | 21.1 V |
| Current at Maximum Power (Imp) | 9.73 A |
| Open Circuit Voltage (Voc) | 24.48 V |
| Short Circuit Current (Isc) | 10.21 A |
| Module Efficiency | 25% |
| Power Tolerance | +/- 5W |
| Cell Type | N-type mono cell (2x17)*2 |
| Front Material | Tempered glass |
| Junction Box | IP67 (front set/back set) |
| Connector | MC4 compatible, 31.5 in |
| Maximum System Voltage | 1000V DC |
| Maximum Series Fuse | 15A |
| Operating Temperature | -40°C to +85°C (-40°F to 185°F) |
| NOCT | 45±2°C |
| Temperature Coefficient of Pmax | -0.38%/°C |
| Temperature Coefficient of Voc | -0.29%/°C |
| Temperature Coefficient of Isc | 0.05%/°C |
| Dimensions | 49.2 x 30.12 x 1.18 in |
| Weight | 21 lb |
| Charge Controller | |
| Charging Type | PWM, 3-stage (bulk, boost, float) |
| System Voltage | 12V/24V |
| PV Max Input Voltage | 23V/55V |
| Max Charging Current | 30A |
| Max Discharging Current | 30A |
| Self-Consumption | <10mA |
| Battery Types | Sealed lead, gel, flooded, LiFePO4, Li(NiCoMn)O2, user |
| Float Voltage | 13.8V (adjustable 13V-15V), x2 for 24V |
| Boost Voltage | 14.4V (adjustable 13V-17V), x2 for 24V |
| Low Voltage Disconnect | 11.0V (adjustable 9V-12V), x2 for 24V |
| Low Voltage Reconnect | 12.6V (adjustable 11V-13.5V), x2 for 24V |
| Temperature Compensation | -24 mV/°C for 12V system, x2 for 24V |
| Display | LCD |
| USB Output | 5VDC/1A, short circuit protected |
| Load Port | DC load port, 24H or light and timer control |
| Reverse Connection Protection | Yes |
| Load Over Current Protection | Yes, auto restart every 30s |
| Controller Over V, C, T Protection | Yes |
| Night Reverse Charging Protection | Yes |
| Over Temperature Shutdown | Stops above 85°C, restarts below 65°C |
| Grounding | Positive ground |
| Working Temperature | -20°C to 55°C |
| Terminals | 16mm² |
| Dimensions | 8 x 3.85 x 2 in |
| Mounting Holes | 7.44 x 2.44 in |
| Weight | 1 lb |
| Cables and Hardware | |
| Mounting Brackets | For solar panels |
| Inline Solar Fuse | Included |
| Entry Gland | MC4 type |
| PV Wires | Entry gland to charge controller, 15 ft |
| Warranty | |
| Kit | 2-25 years, product specific |
| Charge Controller | 2 years from date of purchase |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder
