Found the same price or less? Just ask & we'll beat it.
The BougeRV 12V 200W TOPCon Rigid Solar System Kit brings together the four main parts of a small off-grid system: a 24V 200W N-type TOPCon bifacial solar panel, a Sunflow 30A MPPT solar charge controller, a 12.8V 100Ah LiFePO4 battery with 1280Wh of energy and a 1000W 12V pure sine wave inverter.
It's built for campers, vans, cabins and sheds where you want 120VAC power from the sun for small appliances like a portable fridge, a fan, LED lights, a laptop or phone charging. You choose the mounting, fuses and cables to suit your installation, and BougeRV's list of those parts is below.
The panel has 104 N-type TOPCon 16BB cells with a solar cell efficiency of 25%, behind 3.2 mm tempered glass in an anodized aluminum alloy frame. It carries an IP68 rating, a 2400 Pa front and back load rating and Class A application rating, and measures 50.7 x 30.2 x 1.4 inches at 22.5 lb.
The 12V/24V controller accepts up to 450W of solar at 12V and up to 100V of PV input. Its manual lists MPPT tracking efficiency above 99% and charging conversion efficiency above 95%. You can set charging current from 0 to 30A, select a LiFePO4 battery profile, and monitor it on the LCD or over Bluetooth.
The BV12100 battery stores 1280Wh and is rated for 4000 cycles at 25°C, 0.2C and 100% depth of discharge. It supports 100A continuous discharge and up to 100A charging, with an IP65 rating and M8 terminals in a 10.24 x 6.61 x 8.23 inch case.
The battery stops charging at 32°F (0°C) and resumes once it warms to 35.6°F (2°C). The controller offers its own lithium low temperature charging protection when its temperature sensor is connected and the setting is turned on.
The inverter turns 12VDC into 120VAC pure sine wave power at 1000W rated output and 2000W peak for one second, with total harmonic distortion under 5%. It has two 15A AC output terminals, an 18W USB port, a wired remote and Bluetooth app control.
The controller guards against PV overvoltage, reverse connection, short circuit, night reverse charging and over-temperature. The inverter adds input over-voltage, over-discharge, output overload, short circuit, over-temperature and ground fault circuit protection.
Camper and van power. Run 120VAC devices like a laptop, a fan or a coffee maker from the battery and recharge it with solar during the day.
Cabin and shed systems. Mount the rigid panel on a bracket and keep lights and small appliances running away from the grid.
Camping essentials. BougeRV shows this kit powering a portable fridge, a camping fan, LED lights and phone charging at camp.
A base to expand. The battery supports up to four units in parallel, and the controller accepts up to 450W of solar at 12V.
A panel and controller alone only charge a battery you already own. This kit adds the 1280Wh LiFePO4 battery and a 1000W inverter, so you have stored energy and 120VAC output in one order.
The included battery is rated for 4000 cycles and 100A continuous discharge, with a built-in battery management system and low temperature charging protection. Lead-acid batteries can also be charged by this controller using its sealed, gel or flooded settings.
A flexible panel follows a curved roof. This rigid panel uses tempered glass and an aluminum frame, carries an IP68 rating and a 2400 Pa load rating, and can be bracket-mounted and angled toward the sun.
BougeRV lists these as purchased separately: solar panel mounting brackets, MC4 fuses, MC4 extension cables, an MC4 crimping tool, controller-to-battery cables, battery-to-inverter cables and a battery-to-inverter fuse or breaker. Choose each based on your system current, cable distance, panel type and installation.
Connect the battery to the controller before the solar panel, and set the controller's battery type to LiFePO4. Keep solar input below 100V Voc. The inverter has no reverse polarity protection on its input, so check polarity before connecting. BougeRV recommends a DC fuse or breaker on the inverter input, rated at 2 to 2.5 times the inverter's rated input current and placed within 150 mm of the battery. Leave at least 6 inches of clearance around the inverter.
The panel's max power voltage is 31.7V. The Sunflow 30A MPPT controller works with 12V or 24V systems and charges the 12V battery from it.
Vmp is 31.7V, Imp is 6.3A, Voc is 36.4V and Isc is 6.6A, each ±5%. Max system voltage is 1000V DC and the max series fuse rating is 15A.
Check that the battery reads 12V or more with a multimeter, then fully charge it to 13.4V or higher before use.
BougeRV lists 10 years material and workmanship and 30 years linear power output for the panel, 5 years for the battery and 18 months for the inverter.
BougeRV's inverter manual lists these accessories with the 1000W inverter: two 3 ft 2AWG battery-inverter cables, a 3.2 ft ground cable, a wrench, a 19.6 ft remote control, the product manual and replacement fuses.
The BougeRV 12V 200W TOPCon Rigid Solar System Kit pairs a 25% efficient bifacial panel and a Sunflow 30A MPPT controller with a 1280Wh LiFePO4 battery and a 1000W pure sine wave inverter. If you'd like help choosing mounting brackets, fuses and cables for your setup, the Outbound Power team is happy to help.
BougeRV 12V 200W TOPCon Rigid Solar System Kit Specifications |
|
|---|---|
| Kit Contents | |
| Solar Panel | 1 x 24V 200W Bifacial Solar Panel |
| Charge Controller | 1 x 30A MPPT Solar Controller |
| Battery | 1 x 100Ah LiFePO4 Battery |
| Inverter | 1 x 1000W 12V Inverter |
| Solar Panel | |
| Model | TBJ200W-B-B016 (SKU ISE237) |
| Maximum Power | 200W ±5% |
| Max Power Voltage (Vmp) | 31.7V ±5% |
| Max Power Current (Imp) | 6.3A ±5% |
| Open Circuit Voltage (Voc) | 36.4V ±5% |
| Short Circuit Current (Isc) | 6.6A ±5% |
| Max System Voltage | 1000V DC |
| Max Series Fuse Rating | 15A |
| Cells | 104 (4 x 16) N-Type TOPCon 16BB, bifacial |
| Solar Cell Efficiency | 25% |
| Temperature Coefficient of Pmax | -0.32%/°C |
| Temperature Coefficient of Voc | -0.25%/°C |
| Temperature Coefficient of Isc | +0.045%/°C |
| Operating Temperature Limits | -40°F to +185°F (-40°C to +85°C) |
| Front Glass | 3.2 mm (0.13 in) tempered |
| Frame | Anodized aluminum alloy |
| IP Rating | IP68 |
| Max Load | 2400 Pa (front/back) |
| Application Class | Class A |
| MC4 Cables | 14AWG, 3 ft (900 mm) |
| Dimensions | 50.7 x 30.2 x 1.4 in (1287 x 767 x 35 mm) |
| Weight | 22.5 lb (10.2 kg) |
| Charge Controller | |
| Model | Sunflow 30A (BJ2430N) |
| System Voltage | 12V/24V |
| Rated Charging Current | 30A |
| Charging Current Setting | 0 to 30A |
| Battery Types | Sealed, gel, flooded, lithium (LiFePO4), custom |
| Maximum PV Input Power | 450W at 12V, 900W at 24V |
| Maximum PV Input Voltage | 100V |
| MPPT Tracking Efficiency | >99% |
| Charging Conversion Efficiency | >95% |
| Rated Load Current | 20A |
| Lithium Low Temperature Charging Protection | Stops at 32°F (0°C), resumes at 35.6°F (2°C), sensor required |
| Communication | Bluetooth, RS485, TTL, CAN optional (RV-C) |
| Protection Grade | IP34 |
| Dimensions | 185 x 133 x 75 mm |
| Weight | 1076 g |
| Battery | |
| Model | BV12100 |
| Chemistry | LiFePO4 |
| Nominal Voltage | 12.8V |
| Nominal Capacity | 100Ah |
| Energy | 1280Wh |
| Charge Voltage | 14.4V to 14.6V |
| Standard Charge Current | 20A |
| Maximum Charge Current | 100A |
| Maximum Continuous Discharge Current | 100A |
| Maximum Discharge Current | 330A (2.5 s) |
| Cycle Life | 4000 (25°C, 0.2C, 100% DOD) |
| Charge Temperature Range | 32°F to 149°F (0°C to 65°C) |
| Discharge Temperature Range | -4°F to 167°F (-20°C to 75°C) |
| Low Temperature Charging Protection | 32°F (0°C), resumes at 35.6°F (2°C) |
| Max in Series | 4 (48V) |
| Max in Parallel | 4 (400Ah) |
| Protection Rating | IP65 |
| Terminals | M8 |
| Dimensions | 10.24 x 6.61 x 8.23 in (260 x 168 x 209 mm) |
| Inverter | |
| Model | SI121000 |
| Rated Output Power | 1000W |
| Peak Power | 2000W (1 s) |
| Output Voltage | 120VAC |
| Output Frequency | 50/60 Hz |
| Output Waveform | Pure sine wave |
| Total Harmonic Distortion | <5% |
| Rated Input Voltage | 12VDC |
| Input Voltage Range | 10.5V to 15.5VDC |
| Maximum Output Efficiency | >90% |
| Full Load Efficiency | >85% |
| No-Load Loss | ≤0.6A |
| AC Output Terminals | 2 x 15A |
| USB Port | 18W (5V 3.4A, 9V 2A, 12V 1.5A) |
| Communication | RS485 (remote control), Bluetooth (app) |
| Operating Temperature | 14°F to 104°F (-10°C to 40°C) |
| Dimensions | 13.78 x 7.4 x 3.94 in (350 x 188 x 100 mm) |
| Weight | 5.95 lb (2.7 kg) |
| Warranty | |
| Solar Panel | 10 years material and workmanship, 30 years linear power output |
| Battery | 5 Years |
| Inverter | 18 Months |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder
