Found the same price or less? Just ask & we'll beat it.
The BougeRV 12V 400W ShadePower Yuma CIGS Adhesive Flexible Solar Kit is a complete 12V system built around two adhesive-backed thin-film panels. It includes two Yuma 200W CIGS flexible panels with tape, a Sunflow 40A MPPT solar charge controller, two 12.8V 100Ah LiFePO4 batteries and a 2000W 12V pure sine wave inverter.
The adhesive panels are for owners who don't want to put holes in an RV, van, trailer or boat roof. Each panel is 0.06 inches thick and bends to follow curves, so the array sits low on the surface. You add the fuses, cables and any other installation parts your system needs.
Each Yuma panel has an adhesive backing, so you can mount it to your roof without drilling. That keeps the roof surface intact and avoids running fasteners through it.
The CIGS cells sit on a 50 μm stainless steel foil with no glass, and BougeRV rates them for 360° flexibility. Each panel measures 82.2 x 26.0 x 0.06 inches and weighs 8.44 lbs.
Individual bypass diodes, 24 per panel, let shaded cells be bypassed while the rest of the panel keeps producing. BougeRV also lists more power in low light among the panel's key features.
BougeRV rates the panels, their solar connectors and junction boxes IP68 against rain, snow and dust, with 2400 Pa wind resistance and a 5400 Pa snow load. Operating temperature limits are -40°F to +185°F.
The 12V/24V controller accepts up to 600W of solar at 12V and up to 100V of PV input, with MPPT tracking efficiency above 99% and charging conversion efficiency above 95% per its manual. It works with flooded, gel, AGM, sealed and lithium batteries, and BougeRV gives its app a 33 ft remote control range.
Each 12.8V 100Ah battery stores 1280Wh, is rated for 4000 cycles at 100% depth of discharge and supports 100A continuous discharge. The 2000W inverter delivers 4000W peak for one second of 120VAC pure sine wave power with under 5% harmonic distortion.
RV and camper roofs. Stick the two panels to a curved roof and charge a 12V battery bank without drilling.
Teardrop and travel trailers. The low-profile, adhesive-mounted panels follow the curve of a trailer roof.
Boats. Mount the glass-free panels on a deck where shade from rigging is common and weight matters.
Van and overland builds. Store 400W of solar input in two LiFePO4 batteries and run 120VAC devices through the inverter.
A pre-punched panel is fastened through holes in its border. This kit's adhesive panels mount without drilling, which suits owners who want to keep their roof free of holes.
Rigid glass panels need frames and brackets and can't bend. These CIGS panels are 0.06 inches thick, have no glass and bend to fit curved surfaces, with 24 bypass diodes each for partial shade. Rigid panels can be tilted toward the sun, which may suit a flat rack.
Compared with a single 200W panel and one battery, this kit doubles the panels and the storage and uses a 40A controller with room for up to 600W of solar at 12V.
BougeRV lists these as purchased separately: solar panel mounting brackets, MC4 fuses, MC4 extension cables, an MC4 crimping tool, controller-to-battery cables, battery-to-inverter cables and a battery-to-inverter fuse or breaker. Choose each based on your system current, cable distance, panel type and installation.
Fully charge each battery to 13.4V or higher first, and after connecting them in parallel for a 12V 200Ah bank, let them rest 12 to 24 hours before charging or discharging. Connect the battery to the controller before the panels, set the battery type to LiFePO4 and keep the array within the controller's 100V input and 40A rating. The inverter input has no reverse polarity protection, and BougeRV recommends a DC fuse or breaker rated at 2 to 2.5 times the inverter's rated input current, within 150 mm of the battery.
Maximum power is 200W at 17% cell efficiency. Vmp is 24V, Imp is 8.52A, Voc is 30.4V and Isc is 9.48A, each ±5%, with a 1000V DC max system voltage.
Yes. Each battery stops charging at 32°F (0°C) and resumes at 35.6°F (2°C). The controller also offers lithium low temperature charging protection when its temperature sensor is connected and the setting is turned on.
Yes. BougeRV's battery manual allows up to four of these batteries in parallel for 400Ah. Use batteries of the same brand and specification, and fully charge each one before connecting.
BougeRV lists a 10-year warranty and a 25-year performance warranty for the panels, 5 years for the batteries and 18 months for the inverter.
BougeRV's inverter manual lists these accessories with the 2000W inverter: two 3 ft 2AWG battery-inverter cables, a 3.2 ft ground cable, a wrench, a 19.6 ft remote control, the product manual and replacement fuses.
The BougeRV 12V 400W ShadePower Yuma CIGS Adhesive Flexible Solar Kit gives you two adhesive, glass-free 200W panels, a Sunflow 40A MPPT controller, two 1280Wh LiFePO4 batteries and a 2000W pure sine wave inverter. If you'd like help planning your layout, cables and fuses, the Outbound Power team is happy to help.
BougeRV 12V 400W ShadePower Yuma CIGS Adhesive Flexible Solar Kit Specifications |
|
|---|---|
| Kit Contents | |
| Solar Panels | 2 x Yuma Adhesive 200W |
| Charge Controller | 1 x 40A MPPT Solar Controller |
| Batteries | 2 x 100Ah LiFePO4 Battery |
| Inverter | 1 x 12V 2000W Inverter |
| Solar Panel (Each) | |
| Model | Yuma 200W CIGS Thin-Film Flexible Solar Panel with Tape (SKU ISE138) |
| Maximum Power (Pmax) | 200W ±5% |
| Max Power Voltage (Vmp) | 24V ±5% |
| Max Power Current (Imp) | 8.52A ±5% |
| Open Circuit Voltage (Voc) | 30.4V ±5% |
| Short Circuit Current (Isc) | 9.48A ±5% |
| Max System Voltage | 1000V DC |
| Solar Cell Efficiency | 17% |
| Cell Type | CIGS thin-film on 50 μm stainless steel foil, glass-free |
| Flexibility | 360° |
| Bypass Diodes | 24 |
| Temperature Coefficient of Pmax | -0.38%/°C |
| Temperature Coefficient of Voc | -0.28%/°C |
| Temperature Coefficient of Isc | -0.008%/°C |
| Operating Temperature Limits | -40°F to +185°F |
| IP Rating | IP68 (panel, connectors, junction box) |
| Wind Resistance | 2400 Pa |
| Snow Load | 5400 Pa |
| Mounting | Adhesive backing |
| Dimensions | 82.2 x 26.0 x 0.06 in |
| Weight | 8.44 lbs |
| Charge Controller | |
| Model | Sunflow 40A (BJ2440N) |
| System Voltage | 12V/24V |
| Rated Charging Current | 40A |
| Charging Current Setting | 0 to 40A |
| Battery Types | Flooded, gel, AGM, sealed, lithium (LiFePO4), custom |
| Maximum PV Input Power | 600W at 12V, 1200W at 24V |
| Maximum PV Input Voltage | 100V |
| MPPT Tracking Efficiency | >99% |
| Charging Conversion Efficiency | >95% |
| Rated Load Current | 20A |
| Communication | Bluetooth, RS485, TTL, CAN optional (RV-C) |
| App Range | 33 ft |
| Lithium Low Temperature Charging Protection | Stops at 32°F (0°C), resumes at 35.6°F (2°C), sensor required |
| Protection Grade | IP34 |
| Dimensions | 227 x 159.6 x 75 mm |
| Weight | 1789 g |
| Battery (Each) | |
| Model | BV12100 |
| Chemistry | LiFePO4 |
| Nominal Voltage | 12.8V |
| Nominal Capacity | 100Ah |
| Energy | 1280Wh |
| Charge Voltage | 14.4V to 14.6V |
| Maximum Charge Current | 100A |
| Maximum Continuous Discharge Current | 100A |
| Cycle Life | 4000 (25°C, 0.2C, 100% DOD) |
| Low Temperature Charging Protection | 32°F (0°C), resumes at 35.6°F (2°C) |
| Max in Parallel | 4 (400Ah) |
| Two in Parallel | 12V 200Ah |
| Protection Rating | IP65 |
| Dimensions | 10.24 x 6.61 x 8.23 in (260 x 168 x 209 mm) |
| Inverter | |
| Model | SI122000 |
| Rated Output Power | 2000W |
| Peak Power | 4000W (1 s) |
| Output Voltage | 120VAC |
| Output Waveform | Pure sine wave |
| Total Harmonic Distortion | <5% |
| Rated Input Voltage | 12VDC |
| Input Voltage Range | 10.5V to 15.5VDC |
| Maximum Output Efficiency | >90% |
| AC Output Terminals | 1 x 15A, 1 x 20A |
| USB Port | 18W (5V 3.4A, 9V 2A, 12V 1.5A) |
| Communication | RS485 (remote control), Bluetooth (app) |
| Operating Temperature | 14°F to 104°F (-10°C to 40°C) |
| Dimensions | 14.96 x 7.4 x 3.94 in (380 x 188 x 100 mm) |
| Weight | 8.4 lb (3.8 kg) |
| Warranty | |
| Solar Panels | 10 years, 25-year performance warranty |
| Batteries | 5 Years |
| Inverter | 18 Months |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder
