Early Black Friday Price Drop Guarantee. If our price drops by Cyber Monday, we'll refund the difference. See details
Found the same price or less? Just ask & we'll beat it.
The BougeRV Arch 2.0 100W N-Type Fiberglass Flexible Solar Panel combines 25% efficient N-Type TOPCon cells with a 16-busbar layout and a reinforced fiberglass build. It bends up to 270° to follow curved surfaces, weighs 5.14 pounds and measures 38.3 x 24.1 x 0.1 inches, so it fits RVs, camper vans, boats and rooftop tents where weight and space matter.
This listing offers one, two, three, four or eight panels. Every option uses the same Arch 2.0 panel, SKU ISE214N, so you can build a matched array.
Arch 2.0 moves from P-Type cells to N-Type TOPCon cells rated at up to 25% conversion efficiency. BougeRV says they give more power than standard P-Type panels, better low-light performance and less power degradation over time.
Sixteen busbars per cell replace the standard ten. BougeRV says this boosts efficiency, reduces resistive loss and delivers steadier output over the life of the panel.
Flexible panels often sit flat on a hot roof. The Arch 2.0 has a power temperature coefficient of -0.35% per degree Celsius in BougeRV's spec table, so it loses less output as cell temperature climbs.
The panel bends up to 270° to follow RV roofs, boat decks, van tops and other uneven surfaces. Its slim 0.1 inch profile keeps it low and out of the wind.
A double fiberglass build gives the panel a balance of strength and flexibility. BougeRV says it resists cracks, wear and harsh outdoor conditions, and it is designed for rain, wind and UV exposure.
At 5.14 pounds, one person can carry and position the panel. BougeRV calls its 38.3 x 24.1 inch size RV-friendly, which helps on crowded roofs with vents and fans.
RVs and travel trailers. Add solar to a curved RV roof without adding much weight, to keep house batteries topped up on the road.
Boats and watercraft. The low, light panel suits decks and canopies where space is tight, for cruising, fishing and coastal trips.
Rooftop tent camping. A slim panel on a tent shell or roof rack charges lights, fans and a portable fridge at remote campsites.
Cabins and off-grid sites. Use one or more panels to keep a small battery bank charged for lights and communications.
Versus rigid framed panels. A rigid panel needs brackets and a flat, strong surface. The Arch 2.0 follows curves and weighs a fraction as much, which suits vehicles and boats.
Versus P-Type flexible panels. BougeRV moved Arch 2.0 to N-Type TOPCon cells at 25% efficiency with 16 busbars, for more output and less degradation than P-Type flexible panels with 10 busbars.
Versus the standard Arch panel. The original Arch has a 19.8V open-circuit voltage, while Arch 2.0 is 29.4V. BougeRV does not recommend mixing the two in one array.
This may be a good fit if
Arch 2.0 uses N-Type TOPCon cells with 25% efficiency and 16 busbars, for higher output and durability than standard Arch panels.
BougeRV rates it to flex up to 270°, so it can conform to RV roofs, boat decks and van tops.
Yes. BougeRV says its 29.4V open-circuit voltage makes it compatible with most 24V off-grid systems, especially with an MPPT charge controller.
Yes. It is designed for outdoor use in rain, wind and UV exposure. BougeRV recommends a proper installation for long-term performance.
The BougeRV Arch 2.0 100W N-Type Fiberglass Flexible Solar Panel brings 25% efficient N-Type cells to curved roofs and decks in a 5.14 pound package. At Outbound Power, we help customers plan flexible solar for RVs, vans and boats, from panel count to charge controller. If you have questions about Arch 2.0, our team is happy to help.
BougeRV Arch 2.0 100W N-Type Fiberglass Flexible Solar Panel Specifications |
|
|---|---|
| SKU | ISE214N (1 panel); ISE214N*2, *3, *4, *8 (multi-packs) |
| Maximum Power (Pmax) | 100W ±5% |
| Open Circuit Voltage (Voc) | 29.4V ±5% |
| Max Power Voltage (Vmp) | 25.2V ±5% |
| Max Power Current (Imp) | 3.97A ±5% |
| Short Circuit Current (Isc) | 4.17A ±5% |
| Cell Type | N-Type TOPCon, 16BB |
| Solar Cell Efficiency | 25% |
| Temperature Coefficient (Pmax) | -0.35%/°C |
| Temperature Coefficient (Voc) | -0.3%/°C |
| Temperature Coefficient (Isc) | +0.048%/°C |
| Operating Temperature | -40°F to 140°F |
| Series Fuse Rating | 15A |
| Max System Voltage | 1,000V DC |
| Flexibility | Up to 270° |
| Construction | Double fiberglass |
| Dimensions | 38.3 x 24.1 x 0.1 in |
| Weight | 5.14 lbs per panel |
| Warranty | 5 years materials and workmanship; 25 years power output (80%) |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder
