BougeRV Solar Panel Parallel Connectors 1 to 3 Solar Cable Wire

The BougeRV Solar Panel Parallel Connectors 1 to 3 Solar Cable Wire Join Three Panels Into One Connection Point

The BougeRV Solar Panel Parallel Connectors 1 to 3 Solar Cable Wire are a pair of Y branch MC4 connectors. One is 1 male to 3 female (M/FFF), and the other is 1 female to 3 male (F/MMM). Together they combine three solar panels into a single connection point.

They're for RV, van, cabin and off-grid owners who wire panels in parallel and want fewer cables and connections running to the charge controller.

BougeRV Solar Panel Parallel Connectors 1 to 3 Solar Cable Wire Features

Fewer Cables From the Array

Three panel leads go in on one side and one lead comes out on the other. That cuts the number of cables and connections between your panels and the rest of the system.

Rated for 30A and DC1000V

Each connector is rated at 30A and DC1000V, with contact resistance of ≤5mΩ and insulation resistance of >500mΩ.

IP67 With Double Seal Rings

Double seal rings and a sealed, dust-proof design give the connectors an IP67 rating. BougeRV says they can be used in rain, high winds and snow.

Built for Outdoor Life

The TPE and PPO insulation resists aging and UV, and the flame class is UL94-V0. The connectors work from -40°F to +194°F.

Fits 10-14 AWG PV Cable

The connectors suit single core cable from 1.5mm² to 6mm², which covers 14, 13, 12, 11 and 10 AWG. The leads use tinned copper cable, and each connector measures 13.77 in.

Connect and Release by Hand

The plugs snap together quickly and come apart without any extra tools.

Real-World Applications

RV and van roofs. Tie three roof panels into one run to the charge controller.

Cabins and sheds. Add a third panel to a parallel array without running another cable pair.

Portable setups. Join three panels at camp and unplug them by hand when you pack up.

Practical Comparison

1 to 3 Branch Connectors Versus Separate Cable Runs

Separate runs need a cable pair for each panel. The branch connectors merge three panels near the array, so only one pair runs on to the controller.

1 to 3 Branch Connectors Versus Stacked 2 to 1 Connectors

Joining three panels with 2 to 1 branches takes extra pieces and extra connections. The 1 to 3 pair does it in one step.

Buyer Guidance

Check Your Ratings

These connectors are for parallel wiring. Make sure your panels and cables stay within the 30A and DC1000V ratings and the 10-14 AWG cable range.

This May Be A Good Fit If

• You wire three solar panels in parallel
• Your PV cable is 10 to 14 AWG
• You want IP67 connections outdoors

Common Questions

How Many Connectors Come in the Pair?

Two. You get one M/FFF branch and one F/MMM branch.

What Is the Warranty?

BougeRV provides an 18-month warranty.

Can I Disconnect Them Without Tools?

Yes. BougeRV says the plugs come apart without the aid of any extra instruments.

What's Included

• 1 x BougeRV 1 to 3 Y Branch Connector (M/FFF)
• 1 x BougeRV 1 to 3 Y Branch Connector (F/MMM)

Three Panels, One Clean Connection

The BougeRV Solar Panel Parallel Connectors 1 to 3 Solar Cable Wire give you an IP67, 30A pair of Y branch connectors for joining three panels in parallel. If you're planning an array and want help choosing parts, the Outbound Power team is happy to help.