Renogy 400W N-Type Bifacial Solar Panel
We Beat Any Price
Found the same price or less? Just ask & we'll beat it.
Found the same price or less? Just ask & we'll beat it.

The Renogy 400W N-Type Bifacial Solar Panel is a 400W rigid panel with Mono N-Type cells and a transparent backsheet, so the rear side can add energy from reflected and diffused light. It has 108 cells, a 21.5% module efficiency and an IP68 rating for the junction box and connectors.
It's made for higher-output off-grid systems that need more power from fewer panels, such as cabins, sheds, farms and ground-mounted arrays. We offer it in packs of 4 (1,600W) and 6 (2,400W).
Renogy says the panel can generate up to 30% more energy than a standard monofacial panel in reflective, elevated or rear-exposed installations. The gain depends on mounting angle, height and surface reflectivity. Renogy says the gain is greatest over sand, snow or light-colored surfaces.
The panel uses Grade A+ N-Type monocrystalline cells with up to 25% cell efficiency and 16BB technology. Renogy lists a Pmax temperature coefficient of -0.32%/°C. Renogy says low degradation helps the panel hold its output over time.
The half-cut cell parallel design splits the panel into two independent power zones. Renogy says that if one side is shaded, the other side keeps generating.
The datasheet gives IP68 for the junction box and the MC4 connectors. The panel has a 3.2 mm (0.13 in) tempered glass front, an anodized aluminum alloy frame and Type I fire performance. Renogy says the frame is thickened and the glass is extra strong against hail and falling branches.
Pre-drilled mounting holes speed up installation. Renogy says the panels install on flat roofs, ground mounts, poles or vertical surfaces. Output cables are 12 AWG, 66.93 in (1,700 mm) long.
The junction box has 3 diodes. The MC4 solar connectors are rated 1,500VDC and 40A. Renogy lists the connector range as -40°F to 185°F (-40°C to 85°C).
Renogy lists a 10-year material and workmanship warranty and a 25-year power output warranty for the panel.
Cabins and sheds. Put 1,600W or 2,400W of panels on a small roof or frame.
Farms and ground mounts. Raise and tilt the panels so the rear side sees reflected light.
Hot or snowy sites. Renogy says N-Type cells lose less power in heat than P-Type cells, and bright ground helps the rear side in snow or sand.
A monofacial panel collects light only on its front. This panel adds a rear-side gain when the back can see light, so it suits raised or tilted mounts. Mounted flat against a roof, the rear gain is small.
Renogy says N-Type cells give higher conversion efficiency, a lower temperature coefficient and lower degradation than P-Type cells.
The 4-pack gives 1,600W and the 6-pack 2,400W. The panels are the same, so choose by the system size you plan.
Each panel is rated Voc 39.42V, Vmp 34.0V, Isc 13.06A and Imp 11.76A. Maximum system voltage is 1,500VDC and the maximum series fuse rating is 25A. Add the Voc of panels in series and keep the total under your charge controller or inverter's limit. Mounting hardware and cables are not in the package list.
Each panel is 67.8 x 44.7 x 1.4 in (1,722 x 1,134 x 35 mm) and weighs 45.42 lb (20.6 kg). A 4-pack is about 182 lb and a 6-pack about 273 lb before packaging, so plan your handling and your mounting space for 4 or 6 panels.
Renogy says up to 30%, in reflective, elevated or rear-exposed installations. Results depend on angle, height and surface.
The operating range is -40°F to 185°F (-40°C to 85°C).
Renogy lists a 10-year material and workmanship warranty and a 25-year power output warranty.
Renogy says to define your load, size the battery bank first, and then decide how many panels you need.
The 4-pack includes 4 panels (1,600W). The 6-pack includes 6 x 400W N-Type Bifacial Solar Panels (2,400W).
The Renogy 400W N-Type Bifacial Solar Panel gives you 21.5% module efficiency, bifacial rear-side gain, half-cut cells and IP68 connectors in a 4-pack or 6-pack. If you'd like help planning your array, the Outbound Power team is happy to help.
Renogy 400W N-Type Bifacial Solar Panel Specifications |
|
|---|---|
| Kit Contents | |
| 4-Pack | 4 x 400W N-Type Bifacial Solar Panel (1,600 W) |
| 6-Pack | 6 x 400W N-Type Bifacial Solar Panel (2,400 W) |
| Electrical | |
| Maximum Power at STC | 400 W |
| Optimum Operating Voltage (Vmp) | 34.0 V |
| Optimum Operating Current (Imp) | 11.76 A |
| Open Circuit Voltage (Voc) | 39.42 V |
| Short Circuit Current (Isc) | 13.06 A |
| Module Efficiency | 21.5% |
| Maximum System Voltage | 1,500 VDC |
| Maximum Series Fuse Rating | 25 A |
| Bifacial Energy Gain | Up to 30% (reflective, elevated or rear-exposed installs) |
| Cells and Construction | |
| Solar Cell Type | Mono N-Type |
| Cell Efficiency | Up to 25% |
| Number of Cells | 108 (9 x 6 x 2) |
| Front Film | Tempered glass, 0.13 in (3.2 mm) |
| Frame | Anodized aluminum alloy |
| Fire Performance | Type I |
| Number of Diodes | 3 |
| Thermal Characteristics | |
| Operating Temperature Range | -40°F to 185°F (-40°C to 85°C) |
| Nominal Operating Cell Temperature | 45 ± 2°C |
| Temperature Coefficient of Pmax | -0.32%/°C |
| Temperature Coefficient of Voc | -0.26%/°C |
| Temperature Coefficient of Isc | 0.046%/°C |
| Size and Weight | |
| Dimensions | 67.8 x 44.7 x 1.4 in (1,722 x 1,134 x 35 mm) |
| Weight per Panel | 45.42 lb (20.6 kg) |
| Connectors and Cables | |
| Connectors | MC4 solar connectors, 1,500 VDC, 40 A, -40°F to 185°F (-40°C to 85°C) |
| Output Cables | 12 AWG, 66.93 in (1,700 mm) |
| Durability | |
| IP Rating | IP68 (junction box and connectors) |
| Warranty | |
| Power Output Warranty | 25 years |
| Material and Workmanship Warranty | 10 years |
| Certifications | CE, RCM, TSCA, CA65 |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder