Renogy RV Tilt Mount Brackets

The Renogy RV Tilt Mount Brackets Let You Angle Solar Panels From 0 to 90 Degrees on Your Roof

The Renogy RV Tilt Mount Brackets are an adjustable aluminum mounting set for solar panels. You set the tilt angle from 0 to 90 degrees, so the panel can face the sun at your latitude. Choose a 28 in or a 50 in set.

They are made for RV roofs and any flat surface, including boats, motorhomes and sheds. The bracket parts and fasteners come in the box.

Renogy RV Tilt Mount Brackets Features

0 to 90 Degree Adjustment

Set the mounting angle from 0 to 90 degrees in steps of approximately 5 degrees. Renogy says this adapts the bracket to any latitude with quick, flexible adjustments.

Corrosion-Resistant Aluminum Alloy

The brackets are corrosion-resistant aluminum alloy with strong load-bearing ability for outdoor conditions. Renogy rates the 28 in set at 100 lbs (45 kg) and the 50 in set at 265 lbs (120 kg) load bearing.

Stainless Steel Fasteners

Renogy's photos show stainless steel fasteners and precise hole placement. Wing nuts and plastic knob screws make angle changes straightforward.

Two Sizes

The 28 in set is adaptable to Renogy solar panels up to 220 W. The 50 in set is adaptable to panels up to 550 W. Renogy refers to the user manual for compatible panel details.

Real-World Applications

RV roofs. Raise a panel off a flat roof and aim it at the sun.

Boats and motorhomes. Renogy lists boats and motorhomes as suitable flat surfaces.

Sheds and other flat surfaces. Mount on any flat surface, not only a vehicle roof.

Practical Comparison

Tilt Brackets Versus Flat Mounting

A flat mount keeps a panel at one fixed angle. These brackets let you change the angle as the season or location changes.

28 Inch Versus 50 Inch

The 28 in size suits smaller panels, up to 220 W laid horizontally. The 50 in size handles larger panels, up to 550 W laid horizontally, and has a higher load rating.

Buyer Guidance

Pick the Size From Your Panel

Renogy's chart lists panel guidance for each size. The 28 in set takes up to 220 W horizontal or 50 W vertical. The 50 in set takes up to 550 W horizontal or 175 W vertical. Renogy calls for one 50 in set for a 200 W to 550 W panel, and two sets for panels from 50 W to 100 W.

This May Be A Good Fit If

• You want to adjust the angle of a solar panel
• You are mounting to an RV roof, boat or other flat surface
• You want stainless steel fasteners in the box
• Your panel is within the wattage guidance for the size

Common Questions

Are the brackets stainless steel?

The brackets are aluminum alloy. The fasteners are stainless steel.

How do I change the angle?

Loosen the knob screws, pick the hole that gives the angle you want, and retighten. Renogy describes the range as 0 to 90 degrees in approximately 5 degree steps.

Which size do I need?

Match the bracket size to your panel's wattage and layout using the guidance above. The Outbound Power team can check it with you.

What's Included

• 4 x Fixed L-Brackets
• 2 x Tilt L-Brackets
• 6 x M8 Plastic Knob Screws
• 6 x M8 Wing Nuts
• 4 x M6 x 16mm Hex Cap Bolts
• 4 x M6 Split Lock Washers
• 8 x M6 Flat Washers
• 4 x M6 Hexagonal Nuts
• 6 x M8 Washers
• 6 x M8 Spring Washers
• 10 x 1¼ in Self-Drilling Cap Screws
• 6 x Plastic Retaining Rings

Aim Your Panel With the Renogy RV Tilt Mount Brackets

The Renogy RV Tilt Mount Brackets give you an adjustable angle on a roof or flat surface. If you are unsure which size fits your panel, the Outbound Power team is happy to help.