Victron Energy VE.Direct non inverting remote on/off cable

The Victron Energy VE.Direct Non Inverting Remote On/Off Cable Lets You Switch Your Solar Charger On and Off from Afar

The Victron Energy VE.Direct non inverting remote on/off cable is a small accessory that gives you remote control over BlueSolar and SmartSolar MPPT charge controller models. If your solar charging setup lives in an RV, a cabin, a work trailer, or a utility closet, this cable lets an external signal decide when the charger runs. That way you aren't tied to the controller itself. It is built for anyone who wants a simple, signal-based way to enable or disable solar charging as part of a larger power plan.

Victron Energy VE.Direct Non Inverting Remote On/Off Cable Features

Remote Control for BlueSolar and SmartSolar MPPT Models So You Can Manage Charging from Another Spot

This cable plugs into the VE.Direct port on supported BlueSolar and SmartSolar MPPT charge controllers and turns that port into a remote on/off input. Instead of walking to the controller every time you want to change its state, you let a signal handle it. For a charger tucked behind a panel or mounted somewhere awkward, that is a real convenience.

Simple High Signal Logic for Predictable Charger Behavior

The rules are easy to remember, and that is part of the appeal:

• The charger is enabled when the signal on the cable is high.
• The charger is disabled when the source signal is pulled low.
• The charger is also disabled when the signal is left free floating.

That last point matters when you plan your wiring. A disconnected or floating signal means the charger stays off, so the signal source needs to be dependable.

A Dedicated VE.Direct Port for a Clear and Honest Trade-Off

When you use this cable, the VE.Direct port cannot be used for anything else. That means no connecting to a GX device, and no VE.Direct Bluetooth Smart dongle on a BlueSolar charger. If you rely on monitoring through that port, factor this in before you buy. If remote on/off control is the priority, this cable does that job.

Manual Available So You Can Plan Your Wiring Before You Install

A manual is available for this cable. We suggest reading it before you plan your signal source and wiring, so everything is clear before the first connection is made.

Real-World Applications

Remote on/off control is a niche feature, but when you need it, nothing else quite replaces it. Here is where it may fit:

• RV and van power systems. RVers running a Victron MPPT controller can tie solar charging to a signal rather than reaching the controller each time.
• Off-grid cabins and remote property. Off-grid adventurers can use a remote signal to enable or disable charging as part of a larger system design.
• Home solar and backup power. Homeowners with a BlueSolar or SmartSolar controller in a battery backup setup can add a simple remote control point.
• Mobile businesses and worksites. Food trailers, mobile workshops, and service vehicles often have power gear in hard-to-reach places. A remote signal can make charger control more practical.

Whether this approach suits your setup depends on your controller model and your signal source, so confirm the details before you buy.

How It Compares to Other Ways of Controlling a Solar Charger

The simplest alternative is to control the charger at the controller itself, which works until the controller is somewhere inconvenient. This cable adds a remote option for BlueSolar and SmartSolar MPPT models.

It is also worth knowing what you may not need. Larger SmartSolar models have an onboard Remote On/Off terminal, so this cable is not necessary on those. If your controller already has that terminal, you can likely use it directly. Think of this cable as a practical solution for models that lack it, not a universal upgrade.

Is This Cable the Right Fit for Your Setup

This accessory is a good match if you want signal-based, remote control of a supported Victron MPPT charge controller and you do not need the VE.Direct port for anything else.

This may be a good fit if:

• You use a BlueSolar or SmartSolar MPPT charge controller that needs a remote on/off input.
• You want your charger enabled by a high signal and disabled otherwise.
• You do not need the VE.Direct port for a GX device or Bluetooth Smart dongle.
• You like to review the manual and plan wiring before you buy.

Before ordering, confirm your exact controller model, whether it already includes a Remote On/Off terminal, and that your signal source works with this cable. If you want help matching the right accessory to your system, our team is happy to talk it through.

Common Questions

Which charge controllers work with this cable?
It is designed to remotely control BlueSolar and SmartSolar MPPT charge controller models. Please confirm your specific model before purchase.

Do I need this cable on every SmartSolar controller?
No. It is not necessary on the larger SmartSolar models, because they have an onboard Remote On/Off terminal.

How does the cable turn the charger on and off?
The charger is enabled when the signal on the cable is high. It is disabled when the source signal is pulled low or left free floating.

Can I still connect a GX device or Bluetooth dongle to the VE.Direct port?
No. When this cable is in use, the VE.Direct port cannot be used for other purposes, including a GX device or a VE.Direct Bluetooth Smart dongle on a BlueSolar charger.

Is there a manual?
Yes, a manual is available for this cable, and we recommend reading it before installation.

What's Included

• 1 x Victron Energy VE.Direct Non Inverting Remote On/Off Cable

Build a Smarter Solar Setup with Outbound Power

Small accessories often decide whether a power system feels well planned or merely assembled. The Victron Energy VE.Direct non inverting remote on/off cable is a practical, focused tool for adding remote control to supported MPPT charge controllers, and it backs up the long-term value of a well-built solar system. At Outbound Power, we help homeowners, RVers, off-grid adventurers, and mobile businesses choose the right components, not just the most components. Choose Outbound Power as your knowledgeable partner for dependable, well-matched power solutions.