Found the same price or less? Just ask & we'll beat it.
Authorized ACOPower Dealer
Easy 30-Day Returns
Friendly Lifetime Support
The ACOPower 200W 12V Monocrystalline Solar Panel is a rigid, aluminum-framed module designed for 12 volt battery systems. It produces 200 watts at standard test conditions with an operating voltage of 20.4V, a good match for 12V batteries through either a PWM or MPPT charge controller. With about 5 hours of good sun, one panel can produce roughly 1000 watt hours per day.
Each panel has a pre-installed 12 AWG output cable with solar connectors, an IP65 junction box with bypass diodes, and pre-drilled mounting holes. You can buy it individually or in packs of up to 4 panels, and wire multiple panels in parallel for more current at 12V or in series for 24V and 48V systems and MPPT controllers.
The panel uses 36 monocrystalline cells (4 x 9), 6 inch. Module efficiency 19.5%. Monocrystalline cells generate more power per square foot than polycrystalline cells and perform well in morning, evening and cloudy-day light.
Anti-reflective tempered glass and a corrosion-resistant anodized aluminum frame protect the cells for long outdoor service. ACOPower rates its panels to withstand 2400Pa of wind load and 5400Pa of snow load, plus 35 mm hail at 97 km/h.
The 12 AWG (4 mm²) output leads are 900 mm (35 in) long and end in standard solar connectors that plug into extension cables, branch connectors and controller adapter kits.
Pre-drilled frame holes fit ground mounts, Z brackets, pole mounts and tilt mounts, so the panel can go on an RV roof, a shed, a ground rack or a pole.
Connect panels in parallel to keep 12V output with more current, or in series to raise voltage for MPPT controllers and 24V or 48V batteries. The maximum series fuse rating is 15A.
RV and van roofs. Charge a 12V house battery to run lights, fans, a fridge and electronics.
Cabins and sheds. Build a small off-grid power system with batteries and an inverter.
Water pumping. Supply DC pumps for livestock tanks, gardens and ponds.
Backup power. Recharge a battery bank or power station during an outage.
Versus two 100W panels. One 200W panel means fewer mounts and connections. Two 100W panels fit more easily around roof vents and hatches.
Versus flexible panels. ACOPower's 110W flexible panel is thinner and lighter for curved surfaces. A rigid framed panel holds up better over many years and runs cooler with airflow underneath.
Versus portable suitcase panels. Folding kits are made to set up at camp and pack away. A rigid panel is meant for permanent mounting.
This may be a good fit if
Yes. A charge controller regulates current to the battery and prevents overcharging. ACOPower recommends pairing its panels with a controller and deep cycle battery.
It refers to the battery voltage the panel is designed to charge. The panel's actual operating voltage is higher than the battery so it can push current into it.
That depends on your controller's maximum input voltage. Add up the open circuit voltage (24.3V per panel) and allow extra margin for cold weather, when panel voltage rises.
Yes. Z brackets or tilt mounts attach to the pre-drilled frame holes.
The ACOPower 200W 12V Monocrystalline Solar Panel combines efficient monocrystalline cells, a weather-ready frame and plug-and-play connectors in a panel that fits roofs, racks and poles. At Outbound Power, we help customers size panels, controllers and batteries. If you have questions, our team is happy to help.
ACOPower 200 Watt 12 Volt Monocrystalline Solar Panel Specifications |
|
|---|---|
| Model | HY200-12MB |
| Maximum Power (Pmax) | 200W |
| Optimum Operating Voltage (Vmp) | 20.4V |
| Optimum Operating Current (Imp) | 9.80A |
| Open Circuit Voltage (Voc) | 24.3V |
| Short Circuit Current (Isc) | 10.2A |
| Efficiency | Module 19.5% |
| Solar Cells | 36 monocrystalline cells (4 x 9), 6 inch |
| Maximum System Voltage | 1000VDC |
| Maximum Series Fuse Rating | 15A |
| Operating Temperature | -40°C to +90°C |
| Power Tolerance | 0 to +5W |
| NOCT | 45°C (±2°C) |
| Temperature Coefficient of Pmax | -0.39%/°C |
| Temperature Coefficient of Voc | -0.29%/°C |
| Temperature Coefficient of Isc | 0.05%/°C |
| Glass | 3.2 mm AR coated tempered |
| Junction Box | IP65 with bypass diodes |
| Output Cable | 12 AWG (4 mm²), 900 mm (35 in) |
| Connectors | Solar connectors |
| Frame | Anodized aluminum alloy |
| Dimensions | 1490 x 680 x 35 mm (58.7 x 26.8 x 1.4 in) |
| Weight | 12 kg (26.5 lbs) |
| Pack Options | 1 to 4 panels |
| Test Conditions | 1000W/m², AM1.5, 25°C |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
placeholder
