ACOPower Flexible RV Solar System
We Beat Any Price
Found the same price or less? Just ask & we'll beat it.
Found the same price or less? Just ask & we'll beat it.
The ACOPower Flexible RV Solar System is a complete off-grid power package built around ACOPower's 110W semi-flexible solar panels and 12V LiFePO4 lithium batteries. Each system includes the panels, an MPPT charge controller, a lithium battery bank, a pure sine wave inverter, a battery monitor, a switch, a fuse and the cables to connect it all.
Choose the battery bank and array that fit your rig. Systems with 200Ah or 300Ah of lithium storage use a 1500W inverter, and systems with 400Ah or 600Ah use a 3000W inverter. Arrays range from 220W to 660W. Because the panels weigh just 4.85 lbs each and are 0.12 inches thick, they suit curved van and bus roofs and rigs where weight matters.
Each panel produces 110W at 17.6V and 6.25A and can flex to follow a curved roof. Two to six panels are included depending on the option you choose, for 220W to 660W of solar.
ACOPower's 12V lithium iron phosphate batteries are rated for 100% depth of discharge, so nearly all of their capacity is usable. A 100Ah battery stores 1,280Wh and weighs 23.8 lbs, and a 200Ah battery stores 2,560Wh and weighs 48.94 lbs, far less than lead-acid batteries of the same capacity.
The 1500W inverter delivers 3000W of surge power, and the 3000W inverter delivers 6000W of surge, both with clean 120V AC output for electronics and appliances. Protection covers under-voltage, over-voltage, overload and short circuit.
An ACOPower MPPT controller from 30A to 60A, matched to the array in each option, tracks the panels' maximum power point and includes lithium charging profiles.
A battery monitor shows state of charge, a battery switch isolates the bank for service, and a 60A fuse protects the wiring.
Camper vans and buses. Flexible panels follow curved roofs, and the lithium bank fits tight spaces.
Travel trailers. Lightweight components help you stay within your payload.
Boats. Mount panels on curved hard tops and run AC loads at anchor.
Off-grid cabins. Power lights, a fridge and electronics without a generator.
Versus ACOPower's mono RV systems. The mono systems use rigid framed panels and GEL batteries. This system uses lighter flexible panels and lithium batteries with more usable capacity per pound.
Versus GEL batteries. LiFePO4 costs more up front but offers deeper usable capacity, a much lower weight and a longer cycle life.
Versus rigid panels. Framed panels last longer and run cooler, while flexible panels win on weight and fit on curved roofs.
This may be a good fit if
Pick the battery bank for how long you need to run without sun, and the array for how much you use each day. Each 110W panel adds roughly 500Wh per sunny day.
A 200Ah lithium bank stores about 2,560Wh. A steady 200W load would run for roughly 12 hours.
Yes. Each 100Ah battery supports 100A continuous discharge and each 200Ah battery 200A, and the batteries connect in parallel to share the load.
The solar array charges whenever there is sun, moving or parked. Alternator charging requires a separate DC to DC charger.
The ACOPower Flexible RV Solar System combines thin, light panels with lithium storage and a pure sine inverter in a package sized to your rig. At Outbound Power, we help customers choose the right battery bank and array for how they travel. If you have questions, our team is happy to help.
ACOPower Flexible RV Solar System Specifications |
|
|---|---|
| Battery Options | 200Ah, 300Ah, 400Ah or 600Ah LiFePO4 at 12V |
| Solar Options | 220W, 330W, 440W, 550W or 660W |
| Inverter | 1500W (200Ah, 300Ah) or 3000W (400Ah, 600Ah) pure sine wave |
| 110W Semi-Flexible Solar Panel | |
| Peak Power | 110W |
| Open Circuit Voltage (Voc) | 20.8V |
| Max Power Voltage (Vmp) | 17.6V |
| Short Circuit Current (Isc) | 6.87A |
| Max Power Current (Imp) | 6.25A |
| Dimensions | 44.68 x 21.26 x 0.12 in |
| Weight | 4.85 lbs |
| 12V 100Ah LiFePO4 Battery | |
| Rated Voltage | 12.8V |
| Energy | 1,280Wh |
| Depth of Discharge | 100% |
| Max Continuous Charge / Discharge | 50A / 100A |
| Dimensions | 12.99 x 6.81 x 8.58 in |
| Weight | 23.8 lbs |
| 12V 200Ah LiFePO4 Battery | |
| Energy | 2,560Wh |
| Max Continuous Charge / Discharge | 100A / 200A |
| Dimensions | 20.55 x 9.44 x 8.58 in |
| Weight | 48.94 lbs |
| Inverters | |
| 1500W | 3000W surge, 7.79 lbs |
| 3000W | 6000W surge, 12.1 lbs |
| Output | 120VAC pure sine wave |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
placeholder