Found the same price or less? Just ask & we'll beat it.
Authorized AIMS Power Dealer
Friendly Lifetime Support
The AIMS Power 1000 Watt 12 Volt Pure Sine Inverter Charger combines three jobs in one hardwired unit: a pure sine wave inverter, a battery charger, and an automatic transfer switch. When shore power is available, it passes that power through to your loads and charges your batteries. When shore power disappears, it switches to battery power automatically, so your refrigerator or CPAP keeps going without you lifting a finger. It is built for RV owners and mobile businesses who want clean 120 volt power for medium-sized appliances, a simple design with only the features they need, and the backing of a 2-year warranty with free lifetime technical support.
This inverter delivers pure sine wave output with total harmonic distortion under 3%, the same style of clean AC power your devices expect from a household outlet. AIMS Power lists these everyday loads as a good match:
When shore power is present, the inverter passes it through to your loads. When shore power is lost, it switches to battery power in under 20 milliseconds, keeping your appliances running without interruption. There is no separate transfer switch to buy and wire, and no manual switching when the campground pedestal trips at dinnertime.
While AC power is available, the built-in charger tops up your batteries so they are ready for the next outage. Charging current is selectable between 25 and 55 amps, so you can choose a gentler rate for a smaller bank or a faster rate for a larger one. The charger is designed for gel, AGM, and lead-acid batteries. It does not charge lithium batteries.
Appliances with compressors or motors draw a brief burst of power when they start. With 1000 watts continuous and a 2000 watt surge capability, this inverter has headroom for those startup spikes while running medium-sized everyday loads.
AC input and output connect through a direct-connect terminal block. AIMS Power specifies a hardwire connection, so this unit becomes a permanent part of your electrical system rather than a plug-and-play accessory. Use a qualified installer if you are not comfortable with AC wiring.
Each unit is also Hi-Pot (high voltage dielectric withstand) tested before leaving the factory using UL-certified testing equipment to verify insulation integrity.
RV travel and camping. Plug into the pedestal and your appliances run on shore power while your house batteries charge. Unplug or lose power, and the inverter takes over from the batteries automatically. The fridge stays cold and the CPAP stays on through the night.
Mobile businesses. Rolling businesses often bounce between plugging in and running on batteries. Automatic transfer keeps that changeover seamless for the small appliances and electronics that keep the business running.
Backup for a few critical loads. Because it switches automatically between incoming AC power and battery power, the unit can also back up a small number of critical 120 volt loads on a hardwired circuit. Confirm your specific application with a qualified electrician before installing it in a building.
Versus separate components. A standalone inverter, charger, and transfer switch mean three installations and more wiring. This unit combines all three in one box.
Versus a modified sine wave inverter. Modified sine inverters usually cost less, but some appliances and electronics run hotter, noisier, or not at all on modified sine power. Pure sine output avoids that guesswork for sensitive equipment like CPAP machines.
Versus larger inverter chargers. If you need to run an air conditioner and a full-size microwave at the same time, you will want more than 1000 watts continuous. This unit targets medium-sized loads, which keeps it economical and compact at 12.1 pounds.
Versus a portable gas generator. A generator creates power from fuel and needs refueling, ventilation, and maintenance. This inverter charger converts and manages power from your batteries and your AC source quietly and automatically. If you plan to use a generator as the AC source, confirm its output fits this unit's 120 volt AC input range.
This may be a good fit if
Yes. The built-in transfer switch detects when incoming AC power is lost and switches to battery power in under 20 milliseconds. When AC power returns, it passes that power through again and resumes charging.
The built-in charger does not charge lithium batteries. It supports gel, AGM, and lead-acid batteries.
No. AIMS Power specifies a hardwire connection for AC input and output, so this unit needs a permanent installation.
AIMS Power lists CPAP machines among the intended loads for this inverter. Check your CPAP's power draw, including any heated humidifier, against your battery capacity.
AIMS Power backs this inverter charger with a 2-year warranty and free lifetime technical support.
The AIMS Power 1000 Watt 12 Volt Pure Sine Inverter Charger is a practical way to give your RV or mobile setup automatic backup power, clean pure sine output, and built-in battery charging in a single unit. It is the kind of upgrade you install once and mostly forget about, until the power drops and everything keeps humming. At Outbound Power, we help customers build power systems that fit how they actually travel, work, and prepare. If you have questions about battery sizing, cabling, or how this inverter charger fits your setup, our team is ready to help you get it right the first time.
AIMS Power 1000 Watt 12 Volt Pure Sine Inverter Charger Specifications |
|
|---|---|
| Continuous Output Power | 1000 Watts |
| Surge Power Capability (Peak Power) | 2000 Watts |
| Battery Charge Current | 25A or 55A (Selectable), Does Not Charge Lithium |
| Compatible Battery Types | Gel, AGM, Lead-Acid |
| AC Inverter Transfer Time | < 20ms |
| Transfer / Bypass | 10 Amps |
| Breaker | 25 Amps |
| DC Input / Operating Voltage | 10–16 Volts |
| AC Input Voltage Range | 120 Volts AC ±10% |
| Output Voltage | 120 Volts AC |
| Output Frequency | 60 Hz |
| Output Waveform | Pure Sine Wave (THD < 3%) |
| Over Voltage Shutdown | 16 ±0.5 Volts |
| Battery Low Voltage Alarm | 9.8 ±0.3 Volts |
| Battery Low Voltage Shutdown | 9.5 ±0.5 Volts |
| Battery Overcharge Protection Voltage | 14.4 Volts |
| Battery Float Charge Voltage | 13.5 Volts |
| Efficiency Range | 86%–90% |
| No Load Current | 1.2A |
| No Load Minimum Operating Temperature | 32°F |
| Unit Weight | 12.1 lbs |
| Shipping Weight | 15 lbs |
| Unit Dimensions | 17¼" × 9¼" × 4" |
| Optional Accessory | Remote Switch (AIMS Part# REMOTEHF) |
| Warranty | 2 Years, Plus Free Lifetime Technical Support |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
placeholder
