Found the same price or less? Just ask & we'll beat it.
Authorized AIMS Power Dealer
Friendly Lifetime Support
The AIMS Power 120 Watt Monocrystalline Solar Panel With Aluminum Frame is built to deliver dependable energy generation in demanding environments. High-transmission textured tempered glass and a reinforced surface protect the cells from weather, wind, snow, and impact, while the monocrystalline cell design helps you capture more usable energy from available sunlight. It is engineered for both small and large systems, including homes, RVs, vehicles, off-grid cabins, and industrial solar installations.
Monocrystalline cells with 19.84% cell efficiency provide efficient solar conversion for reliable power generation. The panel's +3 watt tolerance means you receive the full rated output, often with slightly higher real-world performance.
An integrated 10 amp bypass diode minimizes power drop caused by partial shading, helping maintain consistent output in real-world conditions.
Engineered to withstand 6000Pa snow loads and 3600Pa wind loads, plus hail up to 45 mm at 30.7 meters per second, this panel is ready for demanding outdoor environments.
A durable, pre-drilled aluminum frame allows straightforward installation on roof mounts, ground racks, and mobile solar systems.
A 25-year limited warranty and long-term power output guarantee support dependable renewable energy generation for decades.
RVs and vehicles. Add rooftop solar to keep batteries charged on the road.
Off-grid cabins. Build a reliable solar charging system for lights, electronics, and small appliances.
Homes. Expand backup or supplemental solar power.
Industrial installations. Power remote equipment and monitoring systems.
Versus 100 watt panels. The 120 watt panel delivers more output with a higher operating voltage of 20.7 volts, adding headroom for charging 12 volt batteries.
Versus flexible panels. Rigid, glass-fronted panels with aluminum frames offer superior protection and load ratings for permanent installations.
Versus larger panels. Bigger panels produce more power per unit but are heavier and need more mounting space.
A practical way to size an array is to estimate your daily energy use in watt hours, then divide by the average peak sun hours in your area. That gives a rough idea of how many watts of panels you need before accounting for real-world losses from heat, shading, and wiring. Our team is happy to run those numbers with you.
This may be a good fit if
Operating voltage (Vmp) is 20.7 volts, operating current (Imp) is 5.8 amps, open circuit voltage (Voc) is 24.3 volts, and short circuit current (Isc) is 6.3 amps.
AIMS Power rates the panel for 6000Pa snow loads and 3600Pa wind loads.
A 10 amp bypass diode helps minimize power loss from partial shading.
Yes. Panels can be wired in series to raise voltage or in parallel to raise current. Keep the combined voltage and current within your charge controller's input ratings, and use proper fusing or a combiner box for larger arrays.
AIMS Power provides a 25-year limited warranty, with power output guaranteed at 91.2% for 12 years and 80.6% for 25 years.
The AIMS Power 120 Watt Monocrystalline Solar Panel With Aluminum Frame combines efficient cells with rugged construction for long-lasting solar performance. At Outbound Power, we help customers pair panels with the right charge controllers, batteries, and mounts. Contact our team for help planning your solar system.
AIMS Power 120 Watt Solar Panel Specifications |
|
|---|---|
| Maximum Power | 120 Watts |
| Operating Voltage (Vmp) | 20.7 Volts |
| Operating Current (Imp) | 5.8 Amps |
| Open Circuit Voltage (Voc) | 24.3 Volts |
| Short Circuit Current (Isc) | 6.3 Amps |
| Solar Cell | 158.75 mm × 105.83 mm Monocrystalline |
| Number of Cells | 36 (3 × 12) |
| Front Glass Thickness | 3.2 mm Tempered Glass |
| Temperature Coefficient of Isc | 0.05%/°C |
| Temperature Coefficient of Voc | -0.29%/°C |
| Temperature Coefficient of Pm | -0.38%/°C |
| Temperature Range | -40°C to +80°C |
| Power Tolerance | 0 to +3 Watts |
| Surface Maximum Load Capacity | 6000Pa Snow, 3600Pa Wind |
| Allowable Hail Load | 45mm at 30.7m/s |
| Bypass Diode Rating | 10A |
| Cell Efficiency | 19.84% |
| Dimensions | 35⅜" × 26 5/16" × 1⅛" |
| Weight | 15 lbs |
| Warranty | 25-Year Limited (91.2% Output at 12 Years, 80.6% at 25 Years) |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
placeholder
