The AIMS Power 5 Amp 24V to 12V DC-DC Converter Lets You Run 12 Volt Equipment From a 24 Volt System
The AIMS Power 5 Amp 24V to 12V DC-DC Converter steps 24 volt DC power down to a regulated 12.5 to 13.5 volt DC output, so you can run 12 volt devices and accessories from a 24 volt battery or vehicle electrical system. It delivers 5 amps of continuous output, with a maximum of 6 amps, at over 91% conversion efficiency. Built with advanced digital technology and strict quality control standards, it is a non-isolated converter designed for negative ground systems and is ideal for automotive and mobile power applications. A terminal block for DC input and output, a green LED power indicator and a full set of protections make installation and monitoring simple.
AIMS Power 5 Amp 24V to 12V DC-DC Converter Features
Steady 12 Volt Output From a 24 Volt Source
The converter accepts a DC input from 20 to 37 volts and delivers a regulated 12.5 to 13.5 volt output. That gives 12 volt equipment the stable voltage it expects, even as your 24 volt system voltage moves during charging and discharging.
5 Amps Continuous With Headroom to 6 Amps
Rated for 5 amps continuous output and 6 amps maximum, this model can supply roughly 60 watts at 12 volts. Output over current protection engages at 6 amps to protect the converter and your wiring.
Efficient, Transformer-Based Design
AIMS Power lists conversion efficiency above 91%, so less energy is lost as heat. The converter is transformer based and housed in an aluminum case for optimal cooling.
Comprehensive Input and Output Protection
- Input low battery shutdown at 18 volts, plus or minus 1 volt
- Input high battery shutdown above 38 volts
- Input over current and polarity protection with a 7.5A fuse
- Over temperature protection at 150°F, plus or minus 5°F
- Overload protection
- Output short circuit, over current and TVS diode over voltage protection
Simple Terminal Block Wiring and LED Indicator
A terminal block handles DC input and output connections, and a green LED on the front panel confirms the unit is powered on.
CE Listed
The converter is listed to CE EN61000-6-3:2007+A1:2011 and CE EN61000-6-1:2007.
Real-World Applications
Trucks and heavy vehicles. Run 12 volt accessories from a 24 volt vehicle electrical system.
Mobile power systems. Supply 12 volt loads in service vehicles, work trailers and other mobile setups built around 24 volt batteries.
24 volt solar and battery banks. Power 12 volt devices without splitting or tapping your 24 volt battery bank.
Equipment upfits. Add 12 volt equipment to 24 volt machinery and fleet vehicles.
How It Compares to Common Alternatives
Versus tapping half of a 24 volt battery bank. Drawing 12 volts from one battery in a series bank unbalances the batteries. A DC-DC converter draws evenly from the full 24 volt system.
Versus higher-amp models. AIMS Power offers this converter in ratings up to 60 amps, including 10, 15 and 20 amp versions. Step up if your combined 12 volt loads approach 5 amps or you expect to add accessories later.
Versus isolated converters. This is a non-isolated design for negative ground systems. If your application requires isolation between input and output, confirm requirements before ordering.
Is This DC-DC Converter the Right Fit
-
Load size. Add up the current draw of your 12 volt devices and keep it within 5 amps continuous.
-
System type. It is a non-isolated converter for negative ground systems.
-
Input range. Your source must stay within 20 to 37 volts DC.
-
Wiring. Use appropriately sized wire and fusing for your input and output current.
This may be a good fit if
- You have a 24 volt vehicle or battery system and need 12 volt power
- Your 12 volt loads draw 5 amps or less
- You want built-in protection and simple terminal block wiring
- You are working on an automotive or mobile power installation
Common Questions
What Input Voltage Does It Accept?
It accepts 20 to 37 volts DC and shuts down below 18 volts or above 38 volts.
How Much Power Can It Supply?
It is rated for 5 amps continuous and 6 amps maximum at 12.5 to 13.5 volts DC.
Is It Isolated?
No. It is a non-isolated converter designed for negative ground systems.
What Warranty Does It Carry?
AIMS Power backs this converter with a 2 year warranty and lifetime tech support.
What's Included
- 1 x AIMS Power 5 Amp 24V to 12V DC-DC Converter
- 1 x Instruction Manual
Power Your 12 Volt Gear the Right Way
The AIMS Power 5 Amp 24V to 12V DC-DC Converter is a compact, protected way to bring regulated 12 volt power to a 24 volt system. At Outbound Power, we help customers size converters, wiring and fusing for vehicles, equipment and battery systems. Contact our team and we will help you choose the right converter for your loads.
AIMS Power 5 Amp 24V to 12V DC-DC Converter Specifications
|
| DC Input Voltage |
20–37Vdc |
| DC Output Voltage |
12.5–13.5Vdc |
| Output Current |
5 Amps |
| Output Current Max |
6 Amps |
| Isolation |
Non-Isolated (Negative Ground Systems) |
| Conversion Efficiency |
>91% |
| DC Input Low Battery Shutdown |
18 ±1V |
| DC Input High Battery Shutdown |
>38Vdc |
| DC Input Over Current Protection |
7.5A Fuse |
| DC Input Polarity Protection |
Fuse Protected |
| Over Temperature Protection |
150 ±5°F |
| DC Output Short Protection |
Yes |
| DC Output Over Current Protection |
6 Amps |
| DC Output Over Voltage Protection |
TVS Diode |
| Connections |
Terminal Block for DC Input/Output |
| Indicator |
Green Power LED |
| Construction |
Transformer Based, Aluminum Case |
| Certifications |
CE EN61000-6-3:2007+A1:2011, CE EN61000-6-1:2007 |
| Warranty |
2 Year Warranty and Lifetime Tech Support |
AIMS Power 5 Amp 24V to 12V DC-DC Converter Manual