AIMS Power 50 Watt Monocrystalline Solar Panel with Aluminum Frame and Ground/Roof Mount
We Beat Any Price
Found the same price or less? Just ask & we'll beat it.
Found the same price or less? Just ask & we'll beat it.
The AIMS Power 50 Watt Monocrystalline Solar Panel With Aluminum Frame and Ground/Roof Mount is a compact, durable panel built for small solar systems, mobile applications, and stationary installations. Monocrystalline cells and textured high-transmission glass help capture more usable energy from available sunlight, while tempered glass and a reinforced aluminum frame stand up to harsh weather. With pre-drilled mounting holes and 35 inch MC4 leads, it is easy to install for both professional installers and do-it-yourselfers building solar for homes, vehicles, and RVs.
Advanced monocrystalline cells with 17.12% cell efficiency and textured high-transmission glass maximize sunlight absorption. The panel is rated at 50 watts maximum power, with a positive tolerance of 0 to +3 watts over its rated capacity.
An integrated 10 amp bypass diode reduces power loss caused by shading, helping maintain more consistent performance when a branch or roof vent casts a shadow.
A 3.2 mm tempered glass surface and reinforced aluminum frame protect the panel from long-term outdoor exposure. It is engineered for a 6000Pa surface load and hail impacts up to 45 mm at 30.7 meters per second, and it operates from -40°C to +80°C.
The pre-drilled aluminum frame simplifies mounting on roofs, ground mounts, vehicles, and RVs. At 9 pounds with 35 inch MC4 cable leads, it is easy to handle and connect.
Battery maintenance. Pair with a charge controller to keep a 12 volt battery topped off on a boat, RV, or vehicle in storage.
Small off-grid systems. Power lighting, small electronics, or remote sensors in sheds, cabins, and gates.
RVs and vehicles. Add modest solar charging to a mobile setup.
Home energy projects. Start small or expand an existing system with additional panels.
Versus larger panels. Higher-wattage panels produce more power but need more space and stronger mounts. A 50 watt panel fits where space is tight and loads are modest.
Versus flexible panels. Flexible panels conform to curved surfaces, while this framed panel with tempered glass offers rigid protection and straightforward mounting.
Versus polycrystalline panels. Monocrystalline cells typically deliver more power from the same area, which helps in compact installations.
This may be a good fit if
The optimum power voltage is 18 volts and the optimum operating current is 2.78 amps, with an open circuit voltage of 21.6 volts and a short circuit current of 2.99 amps.
Yes. The panel comes with 35 inch MC4 cable leads.
It is rated for a 6000Pa surface load and hail up to 45 mm at 30.7 m/s, with an operating range of -40°C to +80°C.
AIMS Power lists a 25-year limited warranty, with power output warranted at 90% for 10 years and 80% for 25 years.
The AIMS Power 50 Watt Monocrystalline Solar Panel is a tough, efficient building block for small solar systems and mobile power. At Outbound Power, we help customers pair panels with the right charge controllers, batteries, and mounts for systems that work season after season. Reach out to our team for help planning your solar setup.
AIMS Power 50 Watt Solar Panel Specifications |
|
|---|---|
| Maximum Power | 50 Watts |
| Optimum Power Voltage (Vmp) | 18 Volts |
| Optimum Operating Current (Imp) | 2.78 Amps |
| Open Circuit Voltage (Voc) | 21.6 Volts |
| Short Circuit Current (Isc) | 2.99 Amps |
| Solar Cell | 156 × 106 mm Monocrystalline |
| Number of Cells | 36 (12 × 3) |
| Front Glass Thickness | 3.2 mm Tempered Glass |
| Temperature Coefficient of Isc | -0.048%/°C |
| Temperature Coefficient of Voc | -0.29%/°C |
| Temperature Coefficient of Pm | -0.37%/°C |
| Temperature Range | -40°C to +80°C |
| Power Tolerance | 0 to +3 Watts |
| Surface Maximum Load Capacity | 6000Pa |
| Allowable Hail Load | 45mm at 30.7m/s |
| Bypass Diode Rating | 10A |
| Cell Efficiency | 17.12% |
| Module Efficiency | 14.42% |
| Backing | TPT |
| Fill Factor | 70–76% |
| Standard Test Conditions | AM1.5, 1000W/m², 25 ±2°C |
| MC4 Cable Length | 35" |
| Dimensions | 26.75" × 21.25" × 1.37" |
| Weight | 9 lbs |
| Warranty | 25-Year Limited (90% Output at 10 Years, 80% at 25 Years) |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
placeholder