AIMS Power 5000 Watt 12 Volt 120VAC Modified Sine Power Inverter
We Beat Any Price
Found the same price or less? Just ask & we'll beat it.
Found the same price or less? Just ask & we'll beat it.
The AIMS Power 5000 Watt 12 Volt 120VAC Modified Sine Power Inverter converts 12 volt DC battery power into 5000 watts of continuous 120 volt AC power, with 10,000 watts of surge and a 42 amp AC output. It connects to most standard 12 volt vehicle electrical systems without costly upgrades, so fleet vehicles, service trucks, and mobile businesses can add serious AC capacity quickly. It is equally at home in home backup systems, solar setups, RVs, boats, and job sites, where its quiet, emission-free operation makes it a cleaner alternative to a generator.
This inverter offers 5000 watts of continuous power and a 10,000 watt surge capability, enough capacity for multiple tools and appliances at once, along with their startup demands.
A quadruple AC receptacle gives you four outlets, and AIMS Power notes you can add a splitter for even more. Each outlet carries a UL maximum recommendation of 1500 watts. For larger loads, an AC hardwire terminal lets you connect directly.
The front-panel volt meter monitors battery voltage, and the amp meter shows current use, which is the rate your battery is being drained. With a draw this large, that visibility is valuable.
The inverter is pre-wired for a remote on/off switch and has a pre-slotted mounting plate. Efficiency reaches 95% at one-third load and 90% at full load, with a no-load current under 0.6 amps. A thermally controlled fan and aluminum case handle cooling.
AIMS Power highlights these uses:
Versus a portable generator. A generator burns fuel, needs maintenance, and makes noise. This inverter delivers quiet, emission-free power from your battery bank, which is welcome around customers and neighbors.
Versus higher-voltage inverters. 24 and 48 volt systems draw less current for the same output, which reduces cable size. If you are designing a new stationary system, it may be worth comparing. If you are working with a vehicle's 12 volt system, this model fits right in.
Versus pure sine wave inverters. Modified sine wave with phase correction runs most small tools, pumps, motors, and everyday appliances economically. For sensitive electronics, consider a pure sine wave model.
This may be a good fit if
It has a quadruple AC receptacle with four outlets, plus an AC hardwire terminal.
Yes. It is pre-wired for a remote on/off switch.
AIMS Power says it connects to most standard 12 volt vehicle electrical systems without costly upgrades. Proper cables and fusing are still required.
AIMS Power backs this inverter with a 2 year warranty and free lifetime technical support.
The AIMS Power 5000 Watt 12 Volt 120VAC Modified Sine Power Inverter brings big output, flexible connections, and helpful monitoring to working vehicles and backup systems. At Outbound Power, we help customers design high-current systems with the right batteries, cables, and charging plan. Contact our team and we will help you build a setup that performs for years.
AIMS Power 5000 Watt 12 Volt 120VAC Modified Sine Power Inverter Specifications |
|
|---|---|
| Continuous Output Power | 5000 Watts |
| Surge Power Capability (Peak Power) | 10,000 Watts |
| AC Output Current | 42 Amps |
| DC Input / Operating Voltage | 10–15 Volts |
| Output Voltage | 120 Volts AC ±10% |
| Output Waveform | Modified Sine Wave With Phase Correction |
| Output Frequency | 60 Hz ±1 Hz |
| AC Output | Quadruple Type 2 (3-Prong) Receptacle, AC Hardwire Terminal |
| UL Maximum Recommended Per Outlet | 1500W |
| Meters | Front Panel Volt Meter and Amp Meter |
| Full Load Efficiency | 90% |
| 1/3 Load Efficiency | 95% |
| No Load Current | < 0.6 Amps |
| Battery Low Voltage Alarm | 10.5 ±0.5 Volts |
| Battery Low Voltage Shutdown | 10.0 ±0.5 Volts |
| Low Input Voltage Shutdown | 10V |
| High Input Voltage Protection | 15V–17V |
| No Load Minimum Operating Temperature | -15°C (5°F) |
| Full Load Maximum Operating Temperature | 55 ±5°C (Automatic Shutdown) |
| Indicators | Over Temperature LED, Overload LED |
| Cooling | Thermally Controlled Fan, Aluminum Case |
| Protections | Over Temperature, Overload, AC Output Short Circuit, Internal Fuse, Auto Reset on Most Faults |
| Other Features | On/Off Switch, Pre-Wired for Remote On/Off Switch, Pre-Slotted Mounting Plate |
| Product Size (L × W × H) | 16.92" × 7.95" × 6.1" |
| Unit Weight | 18 lbs |
| Boxed Weight | 20 lbs |
| Warranty | 2 Years, Plus Free Lifetime Tech Support |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
placeholder