The AIMS Power 5000 Watt 48 Volt Industrial Grade Pure Sine Power Inverter Delivers Stable 120 Volt Power Where Conditions Are Tough
The AIMS Power 5000 Watt 48 Volt Industrial Grade Pure Sine Power Inverter converts 48 volt DC battery power into stable 120 volt AC electricity, so you can operate appliances, electronics and work equipment wherever reliable power is needed. It combines industrial durability, Digital Signal Processing (DSP) power control and up to 90% efficiency at full load to hold steady voltage and frequency under changing loads or battery conditions. With 5000 watts continuous, a 10,000 watt surge, dual GFCI outlets and a direct connect AC terminal block, it suits off-grid homes, solar systems, service vehicles and mobile work environments, for experienced installers and do-it-yourselfers alike.
AIMS Power 5000 Watt 48 Volt Industrial Grade Pure Sine Power Inverter Features
Pure Sine Wave Output for Sensitive Electronics
The inverter produces clean 120 volt AC power that AIMS Power describes as identical to utility electricity, allowing safe operation of microprocessor-based equipment, medical equipment, appliances and electronics.
Advanced DSP Power Technology
Digital Signal Processing stabilizes voltage and frequency output, even when loads fluctuate or battery voltage declines. That helps keep sensitive equipment running consistently as conditions change.
5000 Watts Continuous With a 10,000 Watt Surge
The inverter delivers 5000 watts of continuous power, about 42 AC amps, and a 10,000 watt surge capability for reliable startup of compressors, motors and power tools.
Rugged Industrial Construction
AIMS Power engineered this inverter for demanding environments, with durable construction, wide temperature operation and a vibration-resistant design for service vehicles and mobile work. FCC certified electronics and up to 90% efficiency at full load round out the package.
Flexible Installation and Power Distribution
Dual GFCI outlets, each block rated at 20 amps, let you plug in equipment directly, while a direct connect AC terminal block gives installers a hardwired wiring option. An external battery voltage sensor and selectable 50 or 60 Hz output add installation flexibility.
Comprehensive Electrical Protection
- Short circuit protection
- AC breaker protection
- Low battery shutdown at 40.0 volts with return to power at 42.5 volts
- High battery shutdown at 62.9 volts with return to power at 58.8 volts
- LED system indicators
Thermally Controlled Cooling
Dual cooling fans switch on automatically at 40°C to maintain efficiency and protect internal components during heavy operation. With the fan off, no load current is 0.60 amps at 48 volts.
Real-World Applications
Off-grid homes and solar systems. Turn a 48 volt solar battery bank into a stable 120 volt supply for household appliances and electronics.
Service vehicles and mobile work. The vibration-resistant design and wide temperature operation suit work trucks and mobile job sites running power tools and compressors.
Backup power systems. Keep sensitive electronics and appliances running from batteries during utility outages.
Remote and industrial sites. Deliver reliable AC power where conventional power is not available.
How It Compares to Common Alternatives
Versus standard plug-in inverters. Many consumer inverters offer only plug-in outlets. This industrial model adds a direct connect AC terminal block, GFCI outlets, an external battery voltage sensor and DSP control.
Versus low frequency inverter chargers. Inverter chargers add a built-in charger and transfer switch but are typically much heavier. At 26 pounds, this inverter is a lighter option when your batteries are charged separately.
Versus a portable generator. A generator needs fuel, ventilation and maintenance. This inverter runs quietly from your battery bank and pairs with solar charging.
Is This Inverter the Right Fit
-
Battery voltage. It requires a 48 volt battery bank, with a DC input range of 41 to 60 volts.
-
Output. Output is 120 volt AC. It does not provide 240 volt output.
-
Charging. It does not include a battery charger or transfer switch, so plan for a separate charging source such as solar.
-
Battery bank and cabling. A 5000 watt load draws significant current from a 48 volt bank, so size batteries, cables and fusing for your loads.
-
Size. The unit measures 23.75" x 8.88" x 6.25" and weighs 26 pounds.
This may be a good fit if
- You run a 48 volt solar, off-grid or vehicle battery system
- You need 5000 watts of 120 volt pure sine power
- You want both GFCI outlets and a hardwire terminal block
- Your equipment includes compressors, motors or power tools
Common Questions
Can I Hardwire This Inverter?
Yes. It includes a direct connect AC terminal block in addition to dual GFCI outlets.
Can It Run 50 Hz Equipment?
Yes. Output frequency is selectable between 50 and 60 Hz.
Will It Protect My Batteries?
Low battery shutdown occurs at 40.0 volts, and the inverter returns to power at 42.5 volts.
What Warranty Does It Carry?
AIMS Power backs this inverter with a 2 year warranty and lifetime technical support.
What's Included
- 1 x AIMS Power 5000 Watt 48 Volt Industrial Grade Pure Sine Power Inverter
- 1 x Instruction Manual
Reliable Industrial Power From Your 48 Volt Bank
The AIMS Power 5000 Watt 48 Volt Industrial Grade Pure Sine Power Inverter brings DSP-controlled pure sine power, strong surge and flexible wiring options to off-grid, solar and mobile work systems. At Outbound Power, we help customers size inverters, battery banks and cabling for real-world loads. Contact our team and we will help you build a system you can count on.
AIMS Power 5000 Watt 48 Volt Pure Sine Inverter Specifications
|
| DC Input Voltage |
48V (41V–60V) |
| Output Voltage (No Load) |
120Vac ±3% |
| Continuous Output Power |
5000 Watts (42 AC Amps) |
| Surge Power |
10,000 Watts |
| Output Waveform |
Pure Sine Wave |
| Efficiency |
90% at Full Load |
| No Load Current (Fan Off) |
0.60A at 48V |
| No Load Current (Fan On) |
1.08A at 48V |
| Low Battery Shutdown |
40.0V |
| Low Battery Return to Power |
42.5V |
| High Battery Shutdown |
62.9V |
| High Battery Return to Power |
58.8V |
| Frequency Selection |
50/60Hz |
| Cooling Fan On Temperature |
40°C |
| AC Outlets |
Dual GFCI Outlets, Rated at 20A per Block |
| AC Connection |
Direct Connect AC Terminal Block |
| Other Features |
DSP Power Control, External Battery Voltage Sensor, LED System Indicators, AC Breaker Protection, Short Circuit Protection, FCC Certified |
| Dimensions |
23.75" × 8.88" × 6.25" |
| Weight |
26 lbs |
| Warranty |
2 Year Warranty and Lifetime Technical Support |
AIMS Power 5000 Watt 48 Volt Industrial Grade Pure Sine Power Inverter Manual