The AIMS Power 60 Amp MPPT Solar Charge Controller Harvests More Energy From Your Solar Array for 12, 24, 36 and 48 Volt Systems
The AIMS Power 60 Amp MPPT Solar Charge Controller uses a smart Maximum Power Point Tracking algorithm to produce the maximum available power from your PV array, operating at 97.5% to 99% efficiency with less power loss. The tracking algorithm is automatic and adjusts as weather conditions change. It charges 12, 24, 36 and 48 volt battery systems with 4-stage charging that adjusts to your battery type, including lithium, and handles up to 60 amps of charging current from arrays with open circuit voltage up to 150 volts. An LCD, LED status indicators, an RS485 port for computer monitoring and an included battery temperature sensor make it a capable controller for off-grid homes, cabins and larger mobile systems.
AIMS Power 60 Amp MPPT Solar Charge Controller Features
MPPT Technology for Maximum Energy Harvest
Maximum Power Point Tracking produces the maximum available power from your PV array to the battery bank by operating at the peak power point of the I-V curve. AIMS Power lists efficiency at up to 99%.
Supports 12, 24, 36 and 48 Volt Systems
Rated PV input is 800 watts at 12 volts, 1700 watts at 24 volts, 2400 watts at 36 volts and 3400 watts at 48 volts. A 150 volt maximum open circuit input lets you wire panels in series for lower current and smaller wire runs.
4-Stage Charging for Every Battery Type
Bulk, absorption, float and equalize stages keep batteries healthy. The battery type selector covers gel, sealed, AGM, flooded and lithium batteries, and a user-defined setting allows adjustable charge voltages from 10 to 15 volts.
Detailed LCD and LED Monitoring
The LCD displays battery voltage and capacity, solar panel voltage and wattage, solar charging current, kWh produced, battery charge mode and DC load current. LED indicators show charging status and faults, and users can revise default parameters to match system design.
RS485 Computer Monitoring
An RS485 connection block allows computer monitoring of all charge controller functions.
Temperature Compensation With Included Sensor
The included battery temperature sensor provides temperature compensation protection for more accurate charging as conditions change.
Fanless Heatsink Cooling and Rugged Construction
Quality heatsink cooling means no fans are needed. Charging output derates above 113°F (45°C) ambient temperature. The rugged metal case is rated IP43, the electronics are conformal coated for marine environments, and protections include over temperature, overload, short circuit, and high and low voltage.
Load Control and Stackable Design
PV input, battery output and load control ports are built in, including a 60 amp DC load port. AIMS Power also lists the controller as stackable.
Real-World Applications
Off-grid homes and cabins. Charge large 24 or 48 volt battery banks from multi-panel arrays.
Backup power systems. Keep backup battery banks charged from solar between outages.
Mobile and marine systems. Conformal coating and fanless cooling suit RVs, boats and work vehicles with larger arrays.
Remote sites. Use RS485 monitoring to keep track of system performance.
How It Compares to Common Alternatives
Versus PWM controllers. PWM controllers are simpler and cost less, but MPPT tracking draws more usable power from the array, especially with higher voltage panels wired in series.
Versus the AIMS Power 80 amp MPPT controller. The 80 amp model raises rated PV input to 1200 watts at 12 volts and 4800 watts at 48 volts. Choose this 60 amp model when your array fits within 800 to 3400 watts, depending on system voltage.
Versus fan-cooled controllers. Heatsink cooling removes the fan as a point of wear.
Is This MPPT Charge Controller the Right Fit
-
Array voltage. Maximum PV open circuit voltage is 150 volts. PV operating voltage must be 15 to 150 volts at 12 volts, 34 to 150 volts at 24 volts, 50 to 150 volts at 36 volts or 60 to 150 volts at 48 volts.
-
Array size. Keep your array within the rated PV input for your battery voltage.
-
Size and weight. The controller measures 14.5" L x 10.5" W x 4.5" H and weighs 15.5 pounds. It has 1.25" wire knockouts.
-
Environment. The operating range is -13°F to 140°F (-25°C to 60°C), and the enclosure is rated IP43.
This may be a good fit if
- You run a 12, 24, 36 or 48 volt battery bank with a sizable solar array
- You want to wire panels in series at up to 150 volts open circuit
- You want detailed LCD readings and computer monitoring
- You use lithium or lead-acid batteries
Common Questions
Does It Charge Lithium Batteries?
Yes. AIMS Power states it charges all battery types including lithium, with user-defined charge voltages.
How Much Solar Can I Connect?
Rated PV input is 800 watts at 12 volts, 1700 watts at 24 volts, 2400 watts at 36 volts and 3400 watts at 48 volts, with a 150 volt maximum open circuit voltage.
Does It Include a Temperature Sensor?
Yes. A battery temperature sensor is included for temperature compensation.
What Warranty Does It Carry?
AIMS Power backs this charge controller with a 2 year warranty.
What's Included
- 1 x AIMS Power 60 Amp MPPT Solar Charge Controller
- 1 x Battery Temperature Sensor
Get More From Every Panel
The AIMS Power 60 Amp MPPT Solar Charge Controller brings efficient MPPT tracking, flexible system voltage support and detailed monitoring to off-grid and backup solar systems. At Outbound Power, we help customers size arrays, controllers and battery banks to work together. Contact our team and we will help you design your system.
AIMS Power 60 Amp MPPT Solar Charge Controller Specifications
|
| Battery System |
12V / 24V / 36V / 48V |
| Controller Type |
MPPT |
| Maximum Charging Current |
60A |
| DC Load Current |
60A Max |
| PV Operating Voltage |
15–150Vdc at 12V, 34–150Vdc at 24V, 50–150Vdc at 36V, 60–150Vdc at 48V |
| Rated PV Input |
12V – 800W, 24V – 1700W, 36V – 2400W, 48V – 3400W |
| Max PV Open Circuit Voltage |
150Vdc |
| Self Power Consumption |
<4 Watts |
| Efficiency |
98.5% |
| Protections |
Overload, Short Circuit, High Voltage, High Temperature, Low Voltage, Auto Correct |
| Monitoring |
LCD, LED Indicators, RS485 Port for Computer Monitoring |
| Battery Types |
Gel, Sealed, AGM, Flooded, Lithium, User Defined (Adjustable Voltage) |
| Charging Stages |
4 Stage (Bulk, Absorption, Float, Equalize) |
| Bulk Charge Voltage |
Sealed 14.4V, AGM/Gel 14.2V, Flooded 14.6V, User Defined 10–15V |
| Float Charge Voltage |
Sealed/AGM/Gel 13.7V, Flooded 13.6V, User Defined 10–15V |
| Equalize Charge Voltage |
Sealed 14.6V, AGM/Gel 14.8V, Flooded 14.8V, User Defined 10–15V |
| Low Voltage Reconnection |
12.5V |
| Low Voltage Disconnect |
10.5V (10.5–12.5V Adjustable) |
| Enclosure |
IP43, Metal |
| Cooling |
Heatsink (No Fans) |
| Humidity |
100% Non-Condensing |
| Temperature Compensation |
-5mV/°C / 2V With Battery Temperature Sensor |
| Temperature Range |
-13°F to 140°F (-25°C to 60°C) |
| Temperature Derating |
From 113°F (45°C) Ambient |
| Coating |
Conformal Coated for Marine Environments |
| Wire Knockouts |
1.25" |
| Dimensions |
14.5" L × 10.5" W × 4.5" H |
| Unit Weight |
15.5 lbs |
| Boxed Weight |
17.5 lbs |
| Certifications |
ETL to UL1741, CE, RoHS, CETL |
| Warranty |
2 Years |
AIMS Power 60 Amp MPPT Solar Charge Controller Manual