Found the same price or less? Just ask & we'll beat it.
Authorized AIMS Power Dealer
Friendly Lifetime Support
The AIMS Power 10,000 Watt 48 Volt Pure Sine Inverter Charger is a low frequency, split phase power system built for emergency backup in homes, businesses, and recreation locations, as well as large off-grid installations. Its 48 volt DC input runs with very little power loss, offering a notable efficiency advantage over 12 or 24 volt systems at this scale. With 10,000 watts of continuous 120/240 volt AC power, a 30,000 watt surge for up to 20 seconds, a 100 amp multi-stage charger, and an automatic transfer switch, it is ready to keep an entire home or facility running when the grid goes down.
Low frequency construction provides three times its continuous rating in surge for up to 20 seconds, so large motors, pumps, and compressors start with confidence.
Output covers 100/110/120 volts and 220/230/240 volts AC, supporting both everyday circuits and 240 volt appliances.
The charger supports gel, lead, AGM, and lithium batteries with eight battery charger settings, keeping your bank healthy whether you charge from the grid or a generator.
When utility power is lost, the built-in automatic transfer switch moves your loads to battery power with a typical transfer time of 10 milliseconds.
A selectable 25 watt power save mode drops idle consumption from 150 watts to 35 watts. Battery priority mode lets you favor stored or solar energy over other AC sources.
Marine-coated boards protect against humidity, dust, and dirt, and over temperature protection with dual thermally controlled fans handles heat. The SW4 switch selects 50 or 60 Hz output for use with electrical systems worldwide, and a remote panel is available.
Home and business backup. AIMS Power notes the most common use is emergency backup power for homes, businesses, and recreation locations.
Off-grid solar. Pair with a 48 volt battery bank charged by solar panels for clean, renewable power.
Cabins and remote properties. Provide whole-property split phase power where the grid does not reach.
International installations. 50/60 Hz selection and multiple output voltages broaden where it can be used.
Versus the 12,000 watt model. AIMS Power offers a 12,000 watt version with more output and a larger charger if you need extra capacity.
Versus a modified sine 10,000 watt inverter. AIMS Power notes its modified sine model has fewer features at a lower price. This pure sine inverter charger adds charging, transfer switching, and split phase output.
Versus a standby generator. A battery-based system runs silently with no fuel on site and can recharge from solar.
This may be a good fit if
Yes. AIMS Power notes it can output 120 or 220/230/240 volts and 50 or 60 Hz via the SW4 switch.
The multi-stage smart charger delivers up to 100 amps.
Idle consumption is 150 watts, or 35 watts in power saver mode.
The AIMS Power product page lists both a 3 year warranty with lifetime tech support and a 1 year warranty, so please confirm current warranty terms with us before purchase.
The AIMS Power 10,000 Watt 48 Volt Pure Sine Inverter Charger combines efficient 48 volt operation, split phase output, and heavy-duty surge for dependable backup and off-grid power. At Outbound Power, we help customers design complete systems with batteries, solar, and professional installation in mind. Reach out to our team to plan yours.
AIMS Power 10,000 Watt 48 Volt Pure Sine Inverter Charger Specifications |
|
|---|---|
| Continuous Output Power | 10,000 Watts |
| Surge Rating | 30,000 Watts (20 Seconds) |
| Output Waveform | Pure Sine / Same as Input (Bypass Mode) |
| Output Voltage | 100–110–120Vac / 220–230–240Vac Split Phase |
| Nominal Efficiency | >88% (Peak) |
| Line Mode Efficiency | >95% |
| Output Frequency | 50Hz ±0.3Hz / 60Hz ±0.3Hz (SW4 Selectable) |
| Typical Transfer Time | 10ms (Max) |
| THD | <10% |
| Ambient Operating Temperature | 14°F to 122°F (-10°C to 50°C) |
| Nominal Input Voltage | 48.0Vdc |
| Low Battery Alarm | 42.0Vdc–44.0Vdc |
| Low Battery Trip | 40.0Vdc–42.0Vdc |
| High Voltage Alarm | 64.0Vdc |
| Low Battery Voltage Restart | 62.0Vdc |
| Idle Consumption | 150 Watts |
| Power Saver Mode Idle Consumption | 35 Watts |
| Charger Rate | 100A Multi-Stage Smart Charger |
| Compatible Batteries | Gel, Lead, AGM, Lithium (8 Charger Settings) |
| AC Connection | Terminal Block |
| Other Features | Automatic Transfer Switch, Battery Priority Selector, Marine Coated, Dual Thermally Controlled Fans, Remote Panel Available |
| Unit Size (L × W × H) | 23.3" × 16.3" × 7.9" |
| Unit Weight | 145.5 lbs |
| Shipping Size (L × W × H) | 30" × 21.25" × 15.25" |
| Shipping Weight | 190 lbs |
| Warranty | Confirm Current Terms Before Purchase (AIMS Lists Both 1 Year and 3 Year Terms) |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
placeholder
