The Anker SOLIX Car Alternator Charger Sends Up to 800W From Your Vehicle's Alternator to Your Anker SOLIX Power Station While You Drive
The Anker SOLIX Car Alternator Charger, which Anker names the Anker SOLIX Alternator Charger, charges an Anker SOLIX portable power station from your vehicle's alternator at up to 800W. Anker says that is up to 8 times faster than a car auxiliary port. It also works in reverse, sending power from the power station back to your vehicle's starter battery.
It's made for RV owners, van travelers, overlanders and anyone who drives between campsites or jobsites and wants the power station charging along the way. Anker says it supports almost all RVs and gas vehicles with 12V or 24V starter batteries. It isn't compatible with electric vehicles.
Anker SOLIX Car Alternator Charger Features
Up to 800W of Charging While You Drive
Anker says a cigarette lighter socket puts out only 120W to 200W, while the Alternator Charger delivers up to 800W directly from the alternator. Anker describes that as up to 8 times faster than a car auxiliary port. Charging power depends on your vehicle, your alternator and how much surplus power is available.
Three Ways to Charge
Anker lists UltraFast PPS Charging, RV expansion and vehicle battery recharge. UltraFast PPS Charging sends alternator power to your power station through the included PPS XT-60i port connection cable. For RV expansion, Anker says pairing the charger with an Anker SOLIX F3000 and three expansion batteries gives an RV 12kWh more capacity.
Recharges Your Starter Battery From the Power Station
The charger supports two-way charging. Connect the battery connection cable and turn on reverse charging in the Anker app, and it sends power from your power station to the vehicle's starter battery.
Set Up for Your Battery Type
After you add the charger in the Anker app, select your vehicle's starter battery type. Anker lists LFP and lead-acid batteries, including AGM, FLD, GL and GEL, and says the charger adjusts its charging to suit the battery you choose.
App Control Over Bluetooth or Wi-Fi
Start or stop charging, switch modes and adjust power from your phone in the Anker app, over Bluetooth or Wi-Fi.
Real-World Applications
RV travel. Charge your power station on every drive between campgrounds, and use RV expansion to build a larger system around an F3000 and its expansion batteries.
Van life and overlanding. Arrive at camp with more charge in the power station, then top up the starter battery from the power station if it runs low.
Work trucks and jobsites. Charge the power station during the drive between jobs so it has more charge for tools when you arrive.
Practical Comparison
Alternator Charger Versus a Car Auxiliary Port
A car auxiliary port cable just plugs in, but Anker puts the socket's output at only 120W to 200W. The Alternator Charger draws up to 800W from the alternator, so the same drive puts more charge into your power station. It does need to be mounted and wired into your vehicle.
Alternator Charger Versus Solar Panels
Solar panels charge your power station when you're parked in the sun, and their output depends on sun, angle, heat and shade. The Alternator Charger works while you drive, day or night. Using both lets the power station charge whether you're driving or parked.
Buyer Guidance
Installation
The charger mounts on the included installation board with six screws and connects to the starter battery with the 7 m battery connection cable and 100A fuse wire. Because it wires into your vehicle's electrical system, have a qualified installer fit it, following Anker's user manual.
Matching It to Your Power Station
Anker lists it for Anker SOLIX portable power stations, connected through the PPS XT-60i port connection cable. If you're not sure your model is supported, contact the Outbound Power team before ordering.
This May Be A Good Fit If
- You drive an RV, van or gas vehicle with a 12V or 24V starter battery
- You want your power station charging while you drive
- You'd like a way to top up your starter battery from the power station
- You're building an RV power system with Anker SOLIX gear
Common Questions
Will It Work With My Vehicle?
Anker lists it for vehicles fitted with 12V or 24V starter batteries, which covers almost all RVs and gas vehicles. It isn't compatible with electric vehicles.
Which Starter Batteries Does It Support?
LFP and lead-acid batteries, including AGM, FLD, GL and GEL. Select your battery type in the Anker app.
How Does It Protect My Starter Battery and Alternator?
Anker says it continuously monitors starter battery voltage and alternator output and uses only surplus power, up to 800W, to prevent overload or over-discharge.
What's Included
- 1 x Anker SOLIX Alternator Charger
- 1 x PPS XT-60i Port Connection Cable (1 m)
- 1 x Battery Connection Cable (7 m)
- 1 x Fuse Wire (100A)
- 1 x Installation Board
- 6 x Screws
- 1 x User Manual
Charge Your Power Station on Every Drive
The Anker SOLIX Car Alternator Charger turns drive time into up to 800W of charging for your Anker SOLIX power station, and it can send power back to your starter battery when you need it. If you'd like help matching it to your power station and vehicle, the Outbound Power team is happy to help.
Anker SOLIX Car Alternator Charger Specifications
|
| Electrical |
| Max Charging Power |
800W (from the alternator) |
| Charging Modes |
UltraFast PPS Charging, RV expansion, vehicle battery recharge |
| Reverse Charging |
Yes, power station to starter battery |
| Protection |
Monitors starter battery voltage and alternator output, uses surplus power only |
| Compatibility |
| Vehicle Starter Battery |
12V or 24V |
| Starter Battery Types |
LFP, lead-acid (AGM, FLD, GL, GEL) |
| Vehicles |
Almost all RVs and gas vehicles |
| Electric Vehicles |
Not compatible |
| Power Stations |
Anker SOLIX portable power stations |
| App Control |
Anker app, Bluetooth or Wi-Fi |
| Construction |
| PPS Connection Cable |
XT-60i, 1 m |
| Battery Connection Cable |
7 m |
| Fuse Wire |
100A |
| Mounting |
Installation board, 6 screws |