The Anker SOLIX Power Saver Kit Pairs a Smart Meter With a Bi-Directional Inlet Box So Your F3000 Can Put Solar and Stored Energy to Work at Home
The Anker SOLIX Power Saver Kit combines two Anker parts for the F3000: the Anker SOLIX Smart Meter and the Anker SOLIX Bi-Directional Inlet Box. Anker says the meter uses AI to check your energy usage every 15 seconds and prioritize your solar electricity where it's needed most, while the inlet box creates a smooth connection between the F3000 and your home circuit.
It's for F3000 owners, especially those charging from solar, who want to use their stored energy at home and rely less on the grid. Anker describes two ways the system can run, Self-Consumption Mode and Time-of-Use Mode. Both parts connect to your home's electrical system, so a licensed electrician should install the kit, and local codes and permits apply.
Anker SOLIX Power Saver Kit Features
AI Energy Monitoring Every 15 Seconds
The Smart Meter keeps your energy usage checked every 15 seconds, and Anker says AI uses those checks to send your solar electricity where it's needed most.
A Two-Way Link to Your Home Circuit
The Bi-Directional Inlet Box connects the F3000 to your home circuit. Anker describes it as part of a setup that integrates solar and the local grid and optimizes your stored energy.
Self-Consumption Mode
In Self-Consumption Mode, Anker says solar energy travels through the F3000 and the Bi-Directional Inlet Box into your main panel, where it's distributed across multiple household loads.
Time-of-Use Mode
During peak hours, Anker says household loads run on solar energy and stored power from the F3000, cutting back on grid use. During off-peak hours, the grid powers your loads and recharges the F3000.
Current Transformers and an Extendable Antenna
The kit includes two 200A and two 50A current transformers for the Smart Meter, plus an extendable antenna. Your electrician handles their installation on your home's electrical panel.
Real-World Applications
Homes with solar charging an F3000. Self-Consumption Mode sends the solar energy your F3000 takes in to household loads through the main panel, so more of your own solar is used at home.
Households on time-of-use rates. If your utility charges more at peak hours, Time-of-Use Mode leans on solar and stored power during those hours and lets the grid recharge the F3000 when rates are lower.
F3000 owners ready for a home setup. One kit connects your F3000 to your home circuit and adds energy monitoring, so your electrician can install both parts in a single job.
Practical Comparison
Power Saver Kit Versus Buying the Parts Separately
The kit puts the Smart Meter and the Bi-Directional Inlet Box in one box under one Anker part number. Buying them separately makes sense mainly if you already own one of the two.
F3000 With the Kit Versus the F3000 on Its Own
On its own, the F3000 powers what you plug into its outlets. With the kit installed, Anker describes energy flowing through the inlet box into your main panel to household loads, guided by the meter's 15-second energy checks.
Buyer Guidance
Installation and Permits
The inlet box connects to your main panel and the current transformers go on your home's electrical panel, so have a licensed electrician install the kit. Expect local codes, permits and any required inspection to apply, and ask whether your utility or local building department needs to approve the setup.
This May Be A Good Fit If
- You own an Anker SOLIX F3000
- You charge the F3000 from solar
- Your utility uses time-of-use rates
- You want to rely less on grid power
Common Questions
Does the Kit Include Solar Panels or a Power Station?
No. Anker's box list covers the Smart Meter, the Bi-Directional Inlet Box, the current transformers, the antenna and the paperwork. The F3000 and any solar panels are separate.
Does It Work With Power Stations Other Than the F3000?
Anker lists the kit for the F3000. If you own a different Anker power station, ask the Outbound Power team before you order.
What Warranty Does It Have?
Anker includes a warranty card in the box, and the kit is covered by Anker's limited warranty. Ask the Outbound Power team for the current terms.
What's Included
- 1 x Anker SOLIX Bi-Directional Inlet Box
- 1 x Anker SOLIX Smart Meter
- 2 x 200A Current Transformer
- 2 x 50A Current Transformer
- 1 x Extendable Antenna
- 1 x User Manual
- 1 x Warning Notice
- 1 x Warranty Card
Solar and Stored Energy Working for Your Home
The Anker SOLIX Power Saver Kit pairs the Smart Meter's 15-second energy checks with the Bi-Directional Inlet Box's link to your home circuit, giving your F3000 Self-Consumption and Time-of-Use modes. If you'd like help planning the installation, the Outbound Power team is happy to help.
Anker SOLIX Power Saver Kit Specifications
|
| Smart Meter |
| Energy Use Check |
Every 15 seconds (AI) |
| Current Transformers |
2 x 200A, 2 x 50A |
| Antenna |
Extendable |
| Bi-Directional Inlet Box |
| Connection |
Anker SOLIX F3000 to home circuit |
| Operating Modes |
| Self-Consumption Mode |
Solar through F3000 and inlet box to the main panel |
| Time-of-Use Mode |
Solar and F3000 at peak hours, grid at off-peak |
| Compatibility |
| Power Station |
Anker SOLIX F3000 |
Anker SOLIX Bi-Directional Inlet Box Manual