The BigBattery RAIO All-In-One Home Energy Storage System Puts a 14.7kWh Battery, Inverter and Solar Charger in One Weather-Rated Cabinet
The BigBattery RAIO (Residential All-In-One) combines a 14.7kWh lithium iron phosphate battery with a built-in 7,680W split-phase inverter and three solar MPPT inputs in one enclosure. It mounts on a wall or stands on the floor, and it works with the RAIO GATEWAY to manage the connection between your home, the utility grid and the loads you want to keep running during an outage.
Every package on this page includes the RAIO GATEWAY, so you and your installer can plan whole-home or partial-home backup from the start. Choose one RAIO for 14.7kWh of storage or two RAIO units for 29.4kWh, in Stealth Gray or Pearl White.
BigBattery RAIO All-In-One Home Energy Storage System Features
A 14.7kWh LFP Battery and 7.68kW Inverter in One Unit
Each RAIO pairs a 14.7kWh LFP battery with a power conversion system rated for 7,680W of continuous AC power and 11,520W of peak power for 10 seconds in backup operation. The battery charges and discharges at up to 40A and 7,680W, so battery and inverter are matched in one cabinet.
Three MPPT Solar Inputs for Up to 11.5kW of Solar
BigBattery suggests up to 11,520W of solar input across three independent MPPT inputs with one string per MPPT. Each input handles up to 16A of operating current and 20A of short-circuit current. The MPPT range runs from 90V to 500V, the start-up voltage is 120V and the maximum DC input voltage is 550V.
120/240V Split-Phase Power With High Conversion Efficiency
The RAIO delivers 120/240V split-phase power at 60 Hz with up to 32A of continuous current. BigBattery lists a maximum efficiency of 98.00% and a CEC efficiency of 97.50%, with total harmonic distortion under 3% at rated output.
RAIO GATEWAY Automatic Transfer for Outage Backup
The RAIO GATEWAY is an automatic transfer switch. When the grid goes down, it disconnects your system from the utility to prevent back-feed into utility lines and keeps your backup loads powered from the RAIO. Its grid, load and inverter ports are rated for 160A continuous (200A maximum), and its smart port supports a generator with automatic generator start at up to 64A continuous.
IP66, NEMA 4X Enclosure Rated From -4°F to 122°F
The RAIO uses an IP66, NEMA 4X enclosure cooled by natural convection. It operates from -4°F to 122°F, with derating above 113°F, at humidity up to 100% condensing and at elevations up to 9,843 ft. The RAIO GATEWAY carries an IP65 rating.
Four Operating Modes With App Monitoring
Choose Self-Use, Feed-in Priority, Backup or Time of Use mode to match how you use solar, battery and grid power. The RAIO data logger connects over Cat5e LAN or 2.4 GHz Wi-Fi, shows solar power, state of charge, load power and working mode on its display, and sends system data to the app.
Built-In Electrical Protection and UL 9540 Certification
Protection features include PV rapid shutdown, AFCI protection, an isolation monitor interrupter, DC reverse-polarity protection, a DC switch, AC short-circuit protection, grid monitoring and anti-islanding protection. BigBattery lists the RAIO as UL 9540 certified.
Real-World Applications
Solar Self-Consumption. In Self-Use mode, solar power supplies your home first, then charges the battery, and only the excess goes to the grid.
Outage Backup. With the RAIO GATEWAY installed, your designated circuits switch to stored energy during a grid outage. Your installer can design the system for whole-home or partial-home backup based on your loads.
Time-of-Use Rate Plans. Time of Use mode lets you schedule when the grid charges the battery, so you can line up charging and battery use with your utility's rate periods.
Adding Storage to an Existing Solar System. The RAIO can run AC-coupled. An existing on-grid solar inverter connects through a smart circuit on the RAIO GATEWAY, and the RAIO stores energy without a direct solar connection.
Practical Comparison
BigBattery RAIO Versus a Separate Inverter and Battery Bank
Many home storage systems pair a separate hybrid inverter with wall or rack batteries, which means more equipment to mount and wire. The RAIO places the battery, inverter, solar inputs and a wiring cabinet with breakers and protection devices in one enclosure, while the RAIO GATEWAY handles the grid connection and backup transfer.
One RAIO Versus Two RAIO Units
One RAIO stores 14.7kWh and provides 7,680W of rated AC power. Two RAIO units store 29.4kWh, and each unit brings its own 7,680W inverter and three MPPT solar inputs. The RAIO GATEWAY inverter port is rated for up to five units at 7,680VA each (38,400W).
Buyer Guidance
Plan the Installation With a Qualified Installer
The RAIO and RAIO GATEWAY involve high-voltage AC and DC circuits, and BigBattery's manual states that installation and service must be done by qualified personnel. Your installer will design whole-home or partial-home backup and select the circuits that stay powered. The RAIO is for stationary installation only.
Check Space, Weight and Mounting
The RAIO measures 29.92 x 49.21 x 5.91 in and weighs 385.8 lb, and it mounts on a wall or on the floor. The RAIO GATEWAY measures 18.50 x 28.74 x 5.87 in, weighs 127.9 lb and mounts on a wall. BigBattery recommends keeping the RAIO out of direct sunlight and keeping the area around it clear for airflow.
This May Be A Good Fit If
- You want solar storage, an inverter and backup transfer from one integrated system
- Your home uses 120/240V split-phase service
- You need equipment rated for outdoor installation (IP66, NEMA 4X)
- You plan to work with a qualified installer on whole-home or partial-home backup
- You want app monitoring and scheduled charging modes
Common Questions
How Does the RAIO Provide Backup Power During an Outage?
The RAIO stores energy from solar or the grid. The RAIO GATEWAY manages the connection to utility power and switches your designated loads to stored energy when the grid goes down.
Can I Choose Which Circuits Stay Powered?
Yes. A qualified installer can design whole-home or partial-home backup. What stays powered depends on the system design and the loads you connect.
Can the RAIO Work With My Existing Solar Inverter?
Yes. In AC-coupled mode, an existing on-grid inverter connects through the RAIO GATEWAY and the RAIO stores energy without a direct solar connection.
What Warranty Does BigBattery Provide?
BigBattery covers the RAIO with a 12-year limited warranty, subject to its written warranty terms.
What's Included
RAIO 1 Pack
- 1 x BigBattery RAIO All-In-One Energy Storage System
- 1 x RAIO GATEWAY Smart Energy Gateway
- 1 x 40A RAIO Breaker
- 1 x RAIO Wi-Fi Module
- 1 x Glass Front Plate (Matching Color)
- 1 x Comm Cable
- 1 x Ethernet Terminal
- 2 x Wall Mount Brackets (RAIO and RAIO GATEWAY)
- 9 x Expansion Plug Sets
- 4 x Glass Front Screws
- 9 x Ferrules
- 5 x Ring Terminals
- 5 x Ground Screws
- 3 x Self Tap Screws
RAIO 2 Pack
- 2 x BigBattery RAIO All-In-One Energy Storage Systems, Each With the RAIO Accessories Listed Above
- 1 x RAIO GATEWAY Smart Energy Gateway With Its Wall Mount Bracket and Hardware
- 2 x 40A RAIO Breakers
Store More of Your Solar Energy With the BigBattery RAIO
The BigBattery RAIO All-In-One Home Energy Storage System brings a 14.7kWh battery, a 7,680W split-phase inverter, three solar inputs and automatic backup transfer together in one weather-rated system. If you have questions about sizing, installation planning or choosing between one and two RAIO units, the Outbound Power team is ready to help.
BigBattery RAIO All-In-One Home Energy Storage System 14.7-29.4kWh 7.68kW 11.5kW Solar Input Specifications
|
| Model |
BigBattery RAIO (K0500 / K0505) with RAIO GATEWAY; 2 Pack K0501 / K0506 |
| Battery |
| Battery Type |
LFP (LiFePO4) |
| Total Capacity |
14.7 kWh per RAIO |
| Max. Charging and Discharging Current |
40 A |
| Max. Charging and Discharging Power |
7,680 W |
| Operating Temperature (Charge and Discharge) |
-4 to 122 °F |
| AC Output |
| Nominal and Max. Apparent AC Power |
7,680 W |
| Peak Apparent AC Power (10 s, EPS) |
11,520 W |
| Nominal AC Voltage |
120 / 240 V split phase |
| AC Grid Frequency |
60 Hz |
| Max. Continuous Current |
32 A |
| Power Factor |
0.8 leading to 0.8 lagging |
| Max. Efficiency |
98.00% |
| CEC Efficiency |
97.50% |
| Total Harmonic Distortion (THDi, Rated) |
<3% |
| PV Input |
| Suggested Max. PV Input Power |
11,520 W |
| Max. DC Voltage |
550 V |
| Start-Up Voltage |
120 V |
| MPPT Voltage Range |
90-500 V |
| Independent MPPT Inputs / Strings per MPPT |
3 / 1 |
| Max. Current per MPPT |
16 A |
| Max. Short-Circuit Current per MPPT |
20 A |
| Protection |
| PV Rapid Shutdown (RSD) |
Yes |
| AFCI Protection |
Yes |
| Isolation Monitor Interrupter (IMI) |
Yes |
| DC Reverse-Polarity Protection |
Yes |
| DC Switch |
Yes |
| AC Short-Circuit Protection |
Yes |
| Grid Monitoring |
Yes |
| Anti-Islanding Protection |
Yes |
| Certification |
UL 9540 |
| General and Environmental |
| Operating Temperature |
-4 to 122 °F (derating above 113 °F) |
| Storage Temperature |
-22 to 131 °F, up to 95% RH non-condensing |
| Operating Humidity |
Up to 100% RH, condensing |
| Max. Elevation |
9,843 ft (3,000 m) |
| Cooling |
Natural convection |
| Enclosure |
NEMA 4X, IP66 |
| Communication |
RS485, CAN, Wi-Fi and LAN |
| Monitoring |
App |
| Operating Modes |
Self-Use, Feed-in Priority, Backup, Time of Use |
| Physical |
| Dimensions (W x H x D) |
29.92 x 49.21 x 5.91 in (760 x 1,250 x 150 mm) |
| Weight |
385.8 lb (175 kg) |
| Mounting |
Wall mount or floor mount |
| Colors |
Stealth Gray or Pearl White |
| RAIO GATEWAY |
| Grid, Load and Inverter Port Voltage |
120 / 240 V, 60 Hz |
| Grid, Load and Inverter Port Current |
160 A continuous (200 A max.) |
| Inverter Port Max. Continuous Power |
5 x 7,680 VA (38,400 W) |
| Smart Port Max. Continuous Power |
38,400 VA |
| Max. Continuous Generator Input Current |
64 A |
| Auto Generator Start |
Yes |
| Energy Meter Accuracy |
1% |
| Communication |
RS485, dry contact |
| Protection Rating |
IP65 |
| Operating Temperature |
-4 to 122 °F |
| Dimensions (W x H x D) |
18.50 x 28.74 x 5.87 in (470 x 730 x 149 mm) |
| Weight |
127.9 lb (58 kg) |
| Mounting |
Wall mount |
| Warranty |
| Warranty |
12-year limited warranty (BigBattery written terms) |
BigBattery RAIO All-In-One Home Energy Storage System Manuals and Documents
BigBattery RAIO User Manual
BigBattery RAIO Specification Sheet