BLUETTI SP100L Portable Solar Panel | 100 Watts

The BLUETTI SP100L Is a Foldable 100W Solar Panel With 23.4% Efficient Cells and an IP67 Rating

The BLUETTI SP100L Portable Solar Panel folds to 23.4 x 22.2 inches and weighs 10.9 lbs, so it is easy to carry to the campsite, the beach or the back of the truck. Monocrystalline cells with up to 23.4% efficiency and a durable ETFE coating turn sunlight into power for your portable power station.

Standard MC4 connectors make the SP100L compatible with all BLUETTI portable power stations and most solar generators on the market. Choose a single panel, or a two- or three-panel set to charge faster or to match a larger power station.

BLUETTI SP100L Features

High-Efficiency Monocrystalline Cells

The SP100L uses monocrystalline silicon cells with up to 23.4% conversion efficiency. Under ideal conditions, BLUETTI says a 100W panel produces up to about 90W of real-world power.

Durable ETFE Coating

An ETFE (ethylene tetrafluoroethylene) lamination resists wear and weather for long-lasting outdoor use.

IP67 Water Resistance

The SP100L is rated IP67 against dust and water. It handles splashes and brief exposure, but should not be left in the rain or underwater for long periods.

Foldable and Portable

The panel folds in half for carrying and storage, then opens to 23.4 x 44.5 inches for charging.

Universal MC4 Connectors

Plug into any BLUETTI power station with the appropriate solar charging cable, or into third-party stations that use MC4 inputs and match the panel's voltage.

Series or Parallel Wiring

Connect multiple SP100L panels, or pair with BLUETTI PV100L and PV100D panels, in series or parallel to increase charging power.

Real-World Applications

Camping and road trips. Recharge a power station during the day to run lights, fans and a fridge at night.

Emergency backup. Keep a power station topped up during long outages without fuel.

Tailgates and beach days. Keep speakers and phones charged from the sun.

How It Compares to Common Alternatives

Versus rigid panels. The SP100L folds for transport and sets up in seconds, while rigid panels are better suited to permanent mounting.

Versus larger 200W portable panels. The SP100L is lighter and easier to carry. Two or three panels can be combined when you need more power.

Is the SP100L the Right Fit

• Power station input. Check that your power station's solar input voltage range fits the panel's 24.62V open-circuit voltage, especially when wiring panels in series.
• Mixing panels. BLUETTI recommends avoiding connections with other brands or panel types.
• Charging cable. Some power stations need an MC4 to XT60 or other solar charging cable.

This may be a good fit if

• You want a light, foldable panel for a portable power station
• You camp, travel or prepare for outages
• You want to start with one panel and add more later

Common Questions

How Should I Position the Panel?

Face it directly toward the sun with no shade on the surface. In the morning and late afternoon, tilt it more steeply. At midday, laying it flatter usually works best.

Can It Charge Third-Party Power Stations?

Yes, if the power station uses MC4 connectors and its solar input matches the panel's voltage.

What If the Panel Gets Submerged?

Do not leave it underwater for more than 5 hours, and let it dry completely before using it again.

What's Included

• 1, 2 or 3 x BLUETTI SP100L 100W Portable Solar Panels (based on the option you choose)
• 1 x User Manual per panel

Clean Solar Charging You Can Carry

The BLUETTI SP100L gives you efficient, weather-resistant solar charging in a foldable panel you can take anywhere. At Outbound Power, we can help you choose the right number of panels for your power station. If you have questions, our team is happy to help.

BLUETTI SP100L Solar Panel Manual