BougeRV MC4 Solar Extension Cable with Extra Connectors
$19.99
We Beat Any Price
Found the same price or less? Just ask & we'll beat it.
The BougeRV MC4 Solar Extension Cable with Extra Connectors Extends Your Solar Wiring With Tinned Copper in 8AWG, 10AWG and 12AWG
The BougeRV MC4 Solar Extension Cable with Extra Connectors is a pair of red and black solar cables, each the length you choose, that extends the connection between solar panels, charge controllers and other compatible solar components. You can pick 8AWG, 10AWG or 12AWG and lengths from 3 ft to 100 ft.
It's for RVs, boats, off-grid systems and other solar setups where the panel sits farther from the controller than its own leads reach.
BougeRV MC4 Solar Extension Cable with Extra Connectors Features
Tinned Copper Conductors
Tinned copper conductors carry current well and resist corrosion and oxidation for long outdoor use.
Dual-Layer Sheathing
A jacket over the insulation gives the cable added protection against wear, heat and everyday outdoor use. The cable is rated from -40°F to 194°F and fire rated to IEC60332-1.
Sealed, Locking MC4 Connectors
The MC4 connectors are rated IP67 on the 10AWG and 12AWG cables and IP68 on the 8AWG cables. Built-in locks snap into place to help prevent accidental disconnection.
Tested Before It Ships
Each cable is tested for electrical conductivity before it leaves the factory.
Real-World Applications
RV roof to controller. Run panel power from the roof down to a charge controller inside.
Ground-mounted panels. Reach a sunny spot away from your camper.
Boats. Route solar power from a mounted panel to the controller on board.
Practical Comparison
One Side Versus Both Ends Installed
One Side Installed Connector cables have an MC4 connector on one end and a bare end for the spare connector. Both Ends Installed Connectors cables are ready to plug in at each end.
8AWG Versus 10AWG Versus 12AWG
BougeRV rates the 8AWG cable at 55A, the 10AWG at 35A and the 12AWG at 30A, all at 1000V DC.
Buyer Guidance
Choosing Gauge and Length
Compare BougeRV's rated current for each gauge with your array's current, then measure the run from panel to controller and choose the length that reaches it. When you install connectors, use opposite-polarity MC4 connectors on each end.
This May Be A Good Fit If
- Your panel leads don't reach the controller
- You want tinned copper solar cable with MC4 ends
- You need a long run up to 100 ft
Common Questions
Do I Get Both a Red and a Black Cable?
Yes. Each option is a red cable and a black cable of the length you choose.
What Voltage Is It Rated For?
1000V DC.
Which Gauge Has the IP68 Rating?
The 8AWG cable. The 10AWG and 12AWG cables are rated IP67.
What's Included
- 1 x Red Solar Extension Cable
- 1 x Black Solar Extension Cable
BougeRV's photos show the One Side Installed Connector and Both Ends Installed Connectors options with a spare male and female MC4 connector and pins, and the No Connector option with bare ends on both cables.
Extend Your Solar Run
The BougeRV MC4 Solar Extension Cable with Extra Connectors gives you red and black tinned copper cable in three gauges and many lengths, with IP67 or IP68 MC4 connectors. If you'd like help choosing a gauge or length, the Outbound Power team is happy to help.
BougeRV MC4 Solar Extension Cable with Extra Connectors Specifications |
|
|---|---|
| Electrical | |
| Rated Voltage | 1000V DC |
| Rated Current, 8AWG | 55A |
| Rated Current, 10AWG | 35A |
| Rated Current, 12AWG | 30A |
| Conductor Area, 8AWG | 8 mm² |
| Conductor Area, 10AWG | 6 mm² |
| Conductor Area, 12AWG | 4 mm² |
| Options | |
| 8AWG Lengths | 3, 6, 10, 20, 30, 40 ft |
| 10AWG Lengths | 6, 10, 20, 30, 50, 70, 100 ft |
| 12AWG Length | 20 ft |
| Connector Options | One Side Installed Connector, Both Ends Installed Connectors, No Connector (by size and length) |
| Cable Pair | 1 red + 1 black, each the selected length |
| Materials | |
| Conductor | Tinned copper |
| Sheathing | Dual layer (insulation and jacket) |
| Connector Type | MC4, locking |
| Durability | |
| Connector Rating, 8AWG | IP68 |
| Connector Rating, 10AWG and 12AWG | IP67 |
| Temperature Range | -40°F to 194°F |
| Fire Rating | IEC60332-1 |
| Testing | Conductivity tested before leaving the factory |
Common Customer Questions
Get answers to the most frequently-asked questions customers ask before placing an order.
Is Outbound Power an Authorized Dealer?
Is Outbound Power an Authorized Dealer?
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
How long will it take for my order to arrive?
How long will it take for my order to arrive?
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
What are your shipping rates? Do you offer free shipping?
What are your shipping rates? Do you offer free shipping?
Everything on our store ships for free. Really!
What is Outbound Power's return policy?
What is Outbound Power's return policy?
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Are Outbound Power products used/old/refurbished?
Are Outbound Power products used/old/refurbished?
Everything sold on our website is brand-new.
Do you price match?
Do you price match?
No — we price BEAT! Please refer to our Price Beat Promise for full details.
