Keep Your Onan P2500i Running Right At High Altitude With The Cummins High Altitude Carburetor Kit
Above 2,000 feet the air is thinner, so a stock carburetor delivers too much fuel for the oxygen available. The engine runs rich, loses power and burns more fuel. The Cummins High Altitude Carburetor Kit for the 98cc Cummins Onan P2500i gives you carburetor jets sized for your elevation, so the generator runs the way it should from 2,000 to 7,000 feet.
Cummins makes this kit in two versions, and the right one depends on when your generator was built. Choose your generator’s build date above before you add the kit to your cart.
Which Kit Fits Your P2500i?
-
Built after 09/2020: choose “After 09/2020” (Cummins part A066Z194).
-
Built 09/2020 or earlier: choose “09/2020 and Prior” (Cummins part A058V023).
Not sure when your generator was built? Your P2500i owner’s manual explains how to find the build date from the serial number.
Which Jet For Your Altitude?
Each kit includes jets A, B, C and D. Install the one that matches the elevation where you run the generator.
-
Jet A: 2,000 to 3,000 feet
-
Jet B: 3,000 to 5,000 feet
-
Jet C: 5,000 to 6,000 feet
-
Jet D: 6,000 to 7,000 feet
Below 2,000 feet no kit is required. Do not run the generator below 2,000 feet with a high altitude jet installed.
Cummins High Altitude Carburetor Kit Features
Made For 2,000 To 7,000 Feet
Four jets cover elevations from 2,000 to 7,000 feet, so one kit handles a wide range of mountain elevations.
Two Versions, Matched To Your Build Date
Cummins supplies one kit for P2500i units built 09/2020 and prior and another for units built after 09/2020. Choose the version that matches your generator’s build date.
Restores The Right Fuel Mixture
The correct jet leans out the fuel mixture for thin air, which brings back smooth running and steady power and keeps fuel use in check.
Dealer Or Owner Installation
Cummins supplies the kit for installation by a dealer or by the owner. It includes the jets and the seals needed for the swap.
Genuine Cummins Onan Part
This is the Cummins kit for the P2500i’s 98cc engine, not a universal jet set.
What's Included
- 1 x Cummins High Altitude Carburetor Kit for the 98cc Onan P2500i (jets A, B, C and D, with seals)