The Cummins P9500DF High Altitude Regulator Kit Keeps Your Generator Running Right on Propane Above 2,000 Feet
The Cummins High Altitude Regulator Kit (part number A058V085) adapts the propane side of a Cummins Onan P9500DF portable generator for use at elevation. It contains four brass propane regulator jets, each matched by Cummins to an altitude range from 2,000 to 7,000 feet.
This kit is for P9500DF generators built on or before July 19, 2020. If your P9500DF was built after that date, or you own the P9500DF EFI, you need the newer kit, part number A065P007.
Cummins P9500DF High Altitude Regulator Kit Features
Four Jets Cover 2,000 to 7,000 Feet
Cummins sizes each jet for one band of elevation. Jet 4.2 covers 2,000 to 3,000 feet, Jet 4.1 covers 3,000 to 5,000 feet, Jet 4.0 covers 5,000 to 6,000 feet and Jet 3.9 covers 6,000 to 7,000 feet. You install the one jet that matches where the generator runs.
Matches Propane Flow to Thinner Air
Air gets thinner as elevation rises, so each intake stroke draws in less oxygen. With the factory fuel setting, an engine at altitude gets more fuel than that air can burn cleanly, which can cost power and make it run poorly. The jet numbers step down as elevation goes up, so the propane flow drops along with the available oxygen.
Made for the Earlier P9500DF Build
Cummins lists this kit for P9500DF units built on or before July 19, 2020. Matching the kit to your build date means the jets suit the regulator on your generator.
Change Jets as Your Elevation Changes
All four jets come in the kit, so you can change jets when you take the generator from a mid-elevation home to a higher campsite. Keep the jets you are not using with your generator manual so they are easy to find.
Genuine Cummins Onan Part
This is a Cummins part number for a Cummins generator. It is the kit Cummins lists for the earlier P9500DF, not a universal jet set.
Real-World Applications
Mountain homes and cabins. Denver sits at about 5,280 feet, which falls in the Jet 4.0 range. A P9500DF kept for outage backup there runs on the jet made for that band.
High-country camping. Flagstaff, Arizona, is close to 7,000 feet. If you camp near there, Jet 3.9 covers 6,000 to 7,000 feet.
Mid-elevation towns. Salt Lake City is at about 4,300 feet, inside the Jet 4.1 range of 3,000 to 5,000 feet.
Low ground. Below 2,000 feet, Cummins says no kit is required, so you do not need this kit at all.
How It Compares to Common Alternatives
Versus the A065P007 kit. The Cummins High Altitude Propane Regulator Kit for P9500DF and P9500DF EFI (A065P007) is the kit for P9500DF generators built after July 19, 2020 and for the P9500DF EFI. This A058V085 kit is for the earlier build. Check your build date before you order.
Versus the carburetor kit. These jets are for propane. For gasoline at elevation, Cummins offers a separate High Altitude Carburetor Kit for the P9500DF (A058V084). If you run your dual fuel generator on both fuels at altitude, you may want both kits.
Versus running without a kit. Below 2,000 feet you do not need one. Above 2,000 feet, the factory propane setting is made for lower elevation, which is the problem this kit solves.
Is This Kit the Right Fit
-
Generator model. It fits the Cummins Onan P9500DF. It is not listed for the P9500DF EFI or other Onan models.
-
Build date. Your P9500DF must be built on or before July 19, 2020.
-
Fuel. The jets are for propane operation.
-
Elevation. Cummins covers 2,000 to 7,000 feet with these four jets.
-
Installation. If you are not comfortable working on a propane fuel system, have a qualified technician install the jet and check for leaks.
This may be a good fit if
- You run an earlier P9500DF on propane above 2,000 feet
- Your generator loses power or runs rough on propane at elevation
- You move the generator between different elevations
- You want the Cummins part number listed for your build
Common Questions
How Do I Know if My P9500DF Was Built Before July 19, 2020
Check the data plate on your generator and your purchase records. If you are not sure, send us the model and serial number and we will help you confirm which kit fits.
Which Jet Should I Install
Use the jet for the elevation where the generator runs. Jet 4.2 is for 2,000 to 3,000 feet, Jet 4.1 for 3,000 to 5,000 feet, Jet 4.0 for 5,000 to 6,000 feet and Jet 3.9 for 6,000 to 7,000 feet.
Do I Need This Kit Below 2,000 Feet
No. Cummins says no kit is required below 2,000 feet.
Does This Kit Help When I Run on Gasoline
No. These are propane regulator jets. For gasoline at elevation, look at the Cummins High Altitude Carburetor Kit for the P9500DF (A058V084).
What if I Run Above 7,000 Feet
Cummins charts these jets up to 7,000 feet. For higher elevations, contact our team before you order and we will check with Cummins.
What's Included
- 1 x Jet 4.2 for 2,000 to 3,000 Feet
- 1 x Jet 4.1 for 3,000 to 5,000 Feet
- 1 x Jet 4.0 for 5,000 to 6,000 Feet
- 1 x Jet 3.9 for 6,000 to 7,000 Feet
Keep Your P9500DF Running Right at Elevation
The Cummins P9500DF High Altitude Regulator Kit gives your earlier P9500DF the propane jet it needs for 2,000 to 7,000 feet. If you have a question about your build date, your elevation or which kit to choose, the Outbound Power team is happy to help.
Cummins P9500DF High Altitude Regulator Kit Specifications
|
| Brand |
Cummins Onan |
| Part Number |
A058V085 |
| Fits |
Cummins Onan P9500DF built on or before July 19, 2020 |
| Fuel |
Propane |
| Jets Included |
4 brass propane regulator jets |
| Jet 4.2 |
2,000 to 3,000 ft |
| Jet 4.1 |
3,000 to 5,000 ft |
| Jet 4.0 |
5,000 to 6,000 ft |
| Jet 3.9 |
6,000 to 7,000 ft |
| Below 2,000 ft |
No kit required |
| Kit for Later Builds and P9500DF EFI |
A065P007 |
| Gasoline High Altitude Kit |
A058V084 carburetor kit |