EARLY BLACK FRIDAY SALE IS LIVE  |  SHOP NOW WITH OUR PRICE DROP GUARANTEE →
EARLY BLACK FRIDAY SALE IS LIVE  |  SHOP NOW →
Skip to content

Faraday Defense DEFCON Vehicle Protection

|
SKU: 14010
$399.99

Early Black Friday Price Drop Guarantee

  • Buy now, and if our price drops by Black Friday, we'll refund the difference.
  • Found it lower elsewhere? We'll beat it.

We Beat Any Price

Found the same price or less? Just ask & we'll beat it.

Faraday Defense DEFCON Vehicle Protection Connects Across Your Battery to Shunt Surge Energy Away From Your Vehicle's Electronics

The DEFCON Vehicle is an ultra-duty surge protection device for 12-volt vehicles. Faraday Defense designed it to help protect a vehicle's electronics from the electromagnetic energy an electromagnetic pulse (EMP) can induce in its wiring. It uses metal oxide varistor (MOV) technology, and Faraday rates it at 270,000 amps of total surge current and more than 2,000 joules of total energy absorption. It is made in the USA.

It's for drivers who want transient protection that stays connected at the battery, either on its own or added to Faraday's EMP Vehicle Kit. The module connects across the battery terminals and to the chassis with 36 in cables and ring terminals, mounts under the hood and shows a green light while it is powered and connected.


DEFCON Vehicle Protection Features

270,000 Amps of Surge Current Capacity

The DEFCON Vehicle works by shunting, or shorting, over voltage that comes into your vehicle's electrical system. Its MOVs are rated at 270,000 amps of total surge current and more than 2,000 joules of total energy. Faraday says the fast shunting drains the over voltage away before it can rise high enough to cause damage.

Reacts in Less Than a Billionth of a Second

Faraday Defense rates its turn-on speed at less than 1 ns typical. It "sees" a surge and reacts in under a billionth of a second.

Power-On Indicator Light

A green light on the face of the module shows the unit is receiving power and is properly connected to the battery. The label reads "On, full protection" and "Off, no protection." If the unit is compromised, the light turns off, so a quick look under the hood tells you its status.

Weatherproofed, Potted Construction

Faraday describes the package as weatherproofed, and the module inside is sealed with a potting compound. It uses automotive-grade wire, ring terminals and marine-grade heat shrink tubing for use under the hood.

Mounts Where You Have Room

The body measures 4.5 x 3.375 x 1.875 in, and slotted mounting tabs let you secure it in tight spaces under the hood. The ring terminals fit most battery post bolt clamp screws. The 36 in cables let you mount the module as close to the battery or as far from it as your engine bay allows.

Protection With the Engine On or Off

The DEFCON Vehicle is designed to protect your vehicle both while it's running and while it's parked. It draws 9 mA of current at typical consumption, so it can stay connected while the vehicle is parked.


Real-World Applications

Everyday preparedness. Install it once and leave it connected, parked or on the road.

Adding to an EMP Vehicle Kit. Faraday built the DEFCON Vehicle as a supplement to its EMP Vehicle Kit, with different turn-on characteristics and a power-on indicator the kit doesn't have.

Diesel vehicles with two batteries. Faraday recommends one DEFCON Vehicle per battery so both electrical systems are protected.

Indirect lightning and vehicle faults. Faraday says the DEFCON Vehicle may shunt away energy from a lightning strike and could protect against indirect lightning better than the EMP Vehicle Kit. It also protects from unwanted transients caused by vehicle malfunctions.


Practical Comparison

DEFCON Vehicle Versus a TVS Diode Plug-In Protector

Plug-in protectors such as Faraday's T.R.A.P. devices use very fast TVS diodes. The DEFCON Vehicle uses slightly slower but much heftier metal oxide varistors. Faraday says it offers about 400 times the energy absorption and more than 2,700 times the maximum surge current of its T.R.A.P.-B, plus a power-on indicator. A plug-in protector goes into the 12-volt auxiliary receptacle, while the DEFCON Vehicle connects across the battery terminals and to the chassis and mounts to the vehicle frame.

DEFCON Vehicle Alone Versus With an EMP Vehicle Kit

On its own, the DEFCON Vehicle works as a standalone device. Paired with the EMP Vehicle Kit, you get two transient protection technologies working together, TVS diodes and MOVs, each with its own turn-on characteristics. Faraday says it is safe to connect both the DEFCON Vehicle and a T.R.A.P.-B at the battery at the same time.


Buyer Guidance

Checking Your Vehicle

The DEFCON Vehicle runs on 12-15 volts DC and attaches across a standard 12-volt automobile battery. It is not for home use, and you should never apply AC voltage to it. If your vehicle has two batteries, plan on one unit for each battery.

Battery Draw While Parked

The indicator light draws 9 milliamps. Faraday notes that a typical car battery holds around 55,000 milliamp-hours. Even if the vehicle sat unused for a full month, the light would draw only about 10% of the battery.

This May Be A Good Fit If

  • Your vehicle runs on a 12-volt battery
  • You want EMP and surge protection that stays connected
  • You already own an EMP Vehicle Kit and want a second layer
  • You want a light that confirms the unit is working

Common Questions

How Do I Install the DEFCON Vehicle?

The module attaches across a standard 12-volt automobile battery with positive, negative and ground wires, connects to the chassis and mounts to the vehicle frame through its mounting holes. Installation instructions come in the package, along with a link to a video of the installation process.

What Does the Indicator Light Mean?

When the green light is on, the unit is receiving power and is properly connected to the battery. If the unit is compromised, the light turns off.

Is It Safe to Use With a T.R.A.P.-B at the Battery?

Yes. Faraday says it is safe for the DEFCON Vehicle and a T.R.A.P.-B to be connected to the battery at the same time.

Can Lightning Damage the Unit?

A direct lightning strike can destroy almost anything, including the DEFCON Vehicle. Faraday notes that direct strikes are extremely rare and that most lightning strikes are indirect and won't damage the device.

What Warranty Does It Have?

Faraday Defense lists a 10-year limited lifetime warranty for the DEFCON Vehicle.


What's Included

  • 1 x Faraday Defense DEFCON Vehicle Protection Module With 36 In Cables
  • 1 x Installation Instructions

Heavy-Duty Surge Protection at Your Battery

Faraday Defense DEFCON Vehicle Protection gives your 12-volt vehicle MOV surge protection rated at 270,000 amps and more than 2,000 joules, a power-on light you can check at a glance and a weatherproofed, potted module made in the USA. If you'd like help deciding whether to add it to an EMP Vehicle Kit or how many units your vehicle needs, the Outbound Power team is happy to help.


Faraday Defense DEFCON Vehicle Protection Specifications

Fit
Vehicle Battery Standard 12-volt automobile battery
Two-Battery Diesel Vehicles One unit per battery recommended
Use Vehicles only, not for home use
AC Voltage Do not apply AC voltage
Electrical
Operating Voltage 12-15 V DC
Current Consumption 9 mA typical
Surge Current 270,000 A total
Energy Rating Over 2,000 J total
Turn-on Speed Less than 1 ns typical
Protection
Technology Metal oxide varistor (MOV)
Indicator Green power-on light
Light On Full protection
Light Off No protection or unit compromised
Operation Protects with vehicle on or off
Housing Weatherproofed package, internally potted module
Installation
Connection Across battery terminals and to chassis
Wires Positive, negative, ground
Wire Length 36 in
Terminals Ring terminals, fit most battery post bolt clamp screws
Wire and Tubing Automotive-grade wire, marine-grade heat shrink tubing
Mounting Mounting holes, mounts to vehicle frame under the hood
Size and Weight
Body Size 4.5 x 3.375 x 1.875 in (L x W x H)
Width Across Mounting Tabs 6 in
General
Model TYPE-A1
Made In USA
Warranty 10-year limited lifetime

Common Customer Questions

Get answers to the most frequently-asked questions customers ask before placing an order.

Is Outbound Power an Authorized Dealer?

Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.

How long will it take for my order to arrive?

Shipping times vary depending on your location and the product or products ordered.

Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.

After order processing is complete, you will receive tracking information to monitor your order while it is in transit.

Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.

Please refer to the product page for your item and reference the estimated delivery time frame for more details.

Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.

What are your shipping rates? Do you offer free shipping?

Everything on our store ships for free. Really!

What is Outbound Power's return policy?

Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.

Are Outbound Power products used/old/refurbished?

Everything sold on our website is brand-new.

Do you price match?

No — we price BEAT! Please refer to our Price Beat Promise for full details.