Mango Power S PIPV 4-in-1 Cable for 120V Plug-In Solar

The Mango Power S PIPV 4-in-1 Cable Joins Four Microinverters to One Plug for Your 120V Plug-In Solar System

The Mango Power S PIPV 4-in-1 Cable is the AC cable for Mango's Plug-and-Play Solar 120V/1200W system. It carries four AC connectors, one for each Mango Power S microinverter in the four-panel system, and ends in a 1-15P plug.

It suits S PIPV owners who need a spare or replacement cable and anyone putting the four-panel system together. Mango states that it is specifically compatible with the Mango Power S microinverter and this 120V/1200W system.

Mango Power S PIPV 4-in-1 Cable Features

Four AC Connectors on One Cable

Mango lists four AC connectors per cable. Each sits on its own short branch, so all four microinverters share one cable run to the outlet.

1-15P Plug for a 120V System

The cable ends in a 1-15P plug, the plug type Mango lists for the S PIPV system, which outputs 120V.

14AWG Two-Conductor Cable

Mango specifies 14AWG-2C-TC ER cable and lists the cable length as 5/3 m (extension cable length). The cable has an inline joint between the connector branches and the plug.

Connectors Marked Do Not Disconnect Under Load

Each AC connector carries a printed STOP warning not to disconnect it under load, so never separate a connector while the system is producing power.

Real-World Applications

Balcony, Patio or Backyard Solar. Mango lists balconies, patios, backyards, flat roofs, carports and ground mounts as places the system can go, wherever there is sunlight and an outlet. This cable carries the output to that outlet.

Renters. Mango describes the S PIPV as easy to remove and take with you when you move.

Practical Comparison

S PIPV 4-in-1 Cable Versus a Standard Extension Cord

A standard extension cord isn't made with the AC connectors the Mango Power S microinverter uses. The 4-in-1 cable is Mango's accessory for the S PIPV system, with four matching connectors and a 1-15P plug.

Buyer Guidance

Grid Connection Rules

Connecting solar to the grid is subject to local utility interconnection approval and electrical codes, and plug-in solar is not approved everywhere. Consult your local authority and install in full compliance with local regulations. Mango notes that the Smart Gateway Lite is required for S PIPV systems outside Utah to enable zero-export. Mango also advises consulting your local power utility and connecting to the grid only after approval.

This May Be A Good Fit If

• You have a Mango Power S PIPV 120V/1200W system
• You need a spare or replacement 4-in-1 AC cable
• You are assembling a four-panel S PIPV setup

Common Questions

Does the Microinverter Keep Sending Power if I Unplug the Cable?

No. Mango says its S series microinverters have certified anti-islanding protection. If the outlet loses grid power, from a breaker, an unplugged cable or a utility outage, the microinverter stops exporting power until grid conditions are back within specification.

Can I Use This Cable With a Mango Power E?

Mango states that the S PIPV does not support off-grid Mango Power E configurations. This cable is for the S PIPV plug-in system.

What Warranty Covers the Cable?

Mango lists a 3-year warranty for the S PIPV cable kit.

What's Included

• 1 x Mango Power S PIPV 4-in-1 Cable

One Cable for Your Four-Panel Plug-In System

The Mango Power S PIPV 4-in-1 Cable connects the four microinverters of Mango's 120V/1200W plug-and-play system to a single 1-15P plug. If you aren't sure it matches your setup, the Outbound Power team is happy to help.