The Rich Solar 2 Pole PV DC Quick Disconnect Switch Isolates One Solar String Rated Up to 1500V With a Lockable Rotary Handle
The Rich Solar RS-i2 is a PV array DC isolator for one solar string. Its two poles switch in series, it carries a 1500V rated insulation voltage and a 40A rated thermal current, and it suppresses the arc in under 3 ms when you switch it off.
Use it to isolate your array from an inverter, charge controller or battery in on-grid or off-grid systems, from homes and businesses to RVs and boats. The housing is rated IP66NW for outdoor use, and Rich Solar lists the RS-i2 as UL 508I certified.
Rich Solar 2 Pole PV DC Quick Disconnect Switch Features
One String, Two Poles in Series
The RS-i2 handles a single PV string with both poles in series. MC4 connectors marked IN on one end and OUT on the other let you place it in line between the array and your equipment.
Arc Suppression Under 3 Milliseconds
When the switch opens, it suppresses the arc in under 3 ms. It's rated for an 8 kV impulse withstand voltage and overvoltage category III.
SAFE-LOCK Rotary Switch
The SAFE-LOCK rotary handle has three operating positions to help prevent tampering, and Rich Solar lists a lockout/tagout (LOTO) option for safe maintenance.
Built for Outdoor Mounting
The UV-resistant, flame-retardant PC housing is rated UL94 V-0 and IP66NW, and it works from -40°F to 158°F (-40°C to 70°C). It measures 9.8 x 3.8 x 4.3 in and weighs 1.26 lb, and it mounts with the two included brackets.
Real-World Applications
Home solar systems. Shut off solar input between the array and your inverter or charge controller before service.
RVs and boats. Isolate a single string of panels from the charge controller on a mobile setup.
Commercial sites. Give each single-string array its own lockable DC disconnect.
Practical Comparison
RS-i2 Versus a Fuse or Breaker
The RS-i2 is a manual disconnect switch. Rich Solar doesn't list overcurrent protection for it, so it doesn't replace any fuse or breaker your system design calls for. What it adds is a dedicated, lockable way to open the string.
Buyer Guidance
Match the Rating to Your String Voltage
The 40A figure is the rated thermal current. Under UL 508i, the RS-i2's rated operating current depends on voltage: 40A at 600V and 800V, 30A at 1000V, and 16A at 1200V and 1500V. Check your string's voltage and current against those values.
Install the Connectors Correctly
Don't mix MC4 connectors from different makers. Use only the connectors and terminals supplied, crimp them with the specified tool, and push each connector in until it clicks. Rich Solar warns that skipping these steps can cause overheating, fire or equipment damage. The manual gives 1.2-1.8 N·m for the terminal screws and 2.2-2.6 N·m for the bracket screws. Once installed, the circuit is live, so follow electrical safety practice.
This May Be A Good Fit If
- You need to disconnect one PV string
- Your string current fits the UL 508i rating at your voltage
- You want a lockable switch rated IP66NW
- You run an on-grid or off-grid system
Common Questions
How Many Strings Does It Handle?
One. The RS-i2 is a 2 pole switch for a single PV string.
Is It UL Certified?
Rich Solar lists it as UL 508I certified. Its UL Certificate of Compliance (E554444) covers the RS-i2 as a photovoltaic manual-disconnect switch component evaluated to UL 508I. It's also CE certified.
What Warranty Does It Have?
Rich Solar states a 3-year warranty for the RS-i2.
What's Included
- 1 x Rich Solar RS-i2 PV Array DC Isolator
- 4 x Sealing Hole Plugs
- 2 x Mounting Brackets
- 4 x Bracket Screws
A Simple, Lockable Shutoff for One Solar String
The Rich Solar 2 Pole PV DC Quick Disconnect Switch gives a single PV string a lockable shutoff with fast arc suppression, a 1500V insulation rating and an IP66NW housing. If you'd like help checking its ratings against your array, the Outbound Power team is happy to help.
Rich Solar 2 Pole PV DC Quick Disconnect Switch 1500V 40A 1 String Specifications
|
| Model |
RS-i2 |
| Electrical |
| Rated Insulation Voltage (Ui) |
1500V |
| Rated Thermal Current (Ith) |
40A |
| Poles / Circuit |
2P in series |
| Supported PV Strings |
1 |
| Impulse Withstand Voltage |
8 kV |
| Arc Suppression Time |
<3 ms |
| Overvoltage Category |
III |
| UL 508i Rated Operating Current (Ie) |
| At 600V |
40A |
| At 800V |
40A |
| At 1000V |
30A |
| At 1200V |
16A |
| At 1500V |
16A |
| Physical |
| IP Rating |
IP66NW |
| Operating Temperature |
-40°F to 158°F (-40°C to 70°C) |
| Housing Material |
Flame-retardant PC (UL94 V-0), UV resistant |
| Dimensions (H x W x D) |
9.8 x 3.8 x 4.3 in (249.4 x 97.6 x 110 mm) |
| Weight |
1.26 lb (0.571 kg) |
| Package Dimensions |
5 x 5 x 11 in |
| Gross Weight |
2 lb |
| Operation and Installation |
| Switch |
SAFE-LOCK rotary, 3 operating positions |
| Lockout/Tagout |
LOTO option |
| Connectors |
MC4, marked IN and OUT |
| Terminal Screw Torque |
1.2-1.8 N·m |
| Bracket Screw Torque |
2.2-2.6 N·m |
| Hole Plug Torque |
0.5-0.7 N·m |
| System Types |
On-grid and off-grid solar |
| Certifications and Warranty |
| Certifications |
CE, UL 508I |
| UL Certificate Number |
E554444 |
| Warranty |
3 years |
Rich Solar 2 Pole PV DC Quick Disconnect Switch 1500V 40A 1 String Manuals and Documents
Rich Solar RS-i2 PV Array DC Isolator Manual
Rich Solar RS-i2 PV DC Isolator Specification Sheet
Rich Solar RS-i2 UL 508I Certificate of Compliance