Rich Solar 200 Watt Solar Kit for Portable Power Stations
We Beat Any Price
Found the same price or less? Just ask & we'll beat it.
Found the same price or less? Just ask & we'll beat it.
The Rich Solar 200 Watt Solar Kit for Portable Power Stations combines two MEGA 100 monocrystalline panels with a 30 ft extension cable pair and a set of 2-to-1 parallel connectors. Rich Solar rates the kit at about 0.7kWh of energy per day with 4 peak sun hours, a practical way to recharge a portable power station or solar generator at camp.
The kit is made for power stations, which handle charging on their own, so it does not include a separate charge controller. Each panel is certified to UL 61730, IEC 61215 and CSA C22.2 and is backed by a 25-year output warranty.
Each MEGA 100 panel produces 100W from 9-busbar monocrystalline cells with up to 22.6% efficiency. Together they form a 200W array that is easier to carry and position than a single large panel.
The panels are certified to UL 61730, IEC 61215 and CSA C22.2. They are rated for 2,400Pa wind loads and 5,400Pa snow loads, so they can stay out in the weather at a long-term campsite.
The included pair of 2-to-1 parallel connectors joins both panels into a single positive and negative output. Wired in parallel, the array stays at the panels' 18.6V maximum power voltage while the current of the two panels adds together.
A 30 ft red and black 10 AWG extension cable pair with pre-assembled male and female connectors lets you set the panels in full sun while the power station stays in the shade, in your tent or inside your RV.
Rich Solar includes pre-assembled cables and connection accessories, so you can set up the array without crimping tools.
Camping. Recharge a power station during the day to run lights, fans and phone charging at night.
Overlanding. Keep a power station topped up at remote campsites between drives.
RVs. Add solar charging for a power station without wiring panels into the RV's electrical system.
Home backup. Recharge a power station during an outage to keep a router, phones and small devices running.
Versus a single 200W panel. Two 100W panels give the same rated power in smaller, lighter pieces that are easier to carry and place.
Versus a folding portable panel. Folding panels pack smaller, but rigid glass panels like the MEGA 100 carry wind and snow load ratings and a 25-year output warranty, which suits longer stays.
Versus the Rich Solar 400 Watt Kit for Portable Power Stations. The 400W version uses four MEGA 100 panels for twice the rated array power. The 200W kit is lighter to carry and suits power stations with smaller solar inputs.
This may be a good fit if
Portable power stations and solar generators manage solar charging internally, so this kit supplies only the panels, cables and parallel connectors. Add a charge controller if you plan to charge a standalone battery.
The 2-to-1 parallel connectors combine the two panels into one positive and one negative lead. The 30 ft extension cables then carry power to your power station.
Rich Solar estimates about 0.7kWh per day with 4 peak sun hours. Output changes with weather, season and panel angle.
No. Mounting hardware is not part of this kit. The panels can be leaned or set up on the ground, or mounted with brackets sold separately.
The Rich Solar 200 Watt Solar Kit for Portable Power Stations gives you two certified MEGA 100 panels, long extension cables and parallel connectors for clean, quiet recharging away from the grid. At Outbound Power, we help customers match solar panels and adapters to their power stations. If you have questions, our team is happy to help.
Rich Solar 200 Watt Solar Kit for Portable Power Stations Specifications |
|
|---|---|
| Kit | |
| Model | RS-K200G |
| Solar Array | 200W (2 x 100W) |
| Estimated Daily Energy | About 0.7kWh with 4 peak sun hours |
| Charge Controller | Not included (for power stations and solar generators) |
| Cables | 30 ft 10 AWG red and black extension pair, 2-to-1 parallel connectors |
| MEGA 100 Solar Panel (x2) | |
| Model | RS-M100 |
| Maximum Power (Pmax) | 100W |
| Cell Type | 9-busbar monocrystalline, up to 22.6% efficiency |
| Maximum Power Voltage (Vmp) | 18.6V |
| Maximum Power Current (Imp) | 5.38A |
| Open Circuit Voltage (Voc) | 22.8V |
| Short Circuit Current (Isc) | 5.78A |
| Maximum Series Fuse Rating | 10A |
| Wind and Snow Load | 2,400Pa wind, 5,400Pa snow |
| Dimensions | 39.0 x 21.3 x 1.2 in |
| Weight | 13.2 lbs |
| Certifications | UL 61730, IEC 61215, CSA C22.2 |
| Warranty | 25-year output |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder