The Rich Solar 4 Gauge (AWG) Black and Red Pure Copper Inverter Battery Cables Give Mid-Size Inverters a Solid Battery Connection
The Rich Solar 4 Gauge (AWG) Black and Red Pure Copper Inverter Battery Cables are a matched red and black pair of 4 AWG cables with 5/16 inch lugs pre-installed on both ends. They are made to connect a battery bank directly to an inverter, and they also suit battery-to-battery, bus bar and other heavy DC connections in solar, RV and marine systems.
Rich Solar builds the cables with 100% pure copper conductors and flexible PVC insulation that is VW-1 flame rated and moisture resistant. Choose from nine lengths, from 1 ft to 10 ft, so you can keep each run as short and tidy as possible.
Rich Solar 4 Gauge (AWG) Black and Red Pure Copper Inverter Battery Cables Features
100% Pure Copper Conductors
Each cable uses 665-strand pure copper construction for reliable power transfer and flexibility, so it bends around battery boxes and through tight compartments more easily than stiff solid wire.
Pre-Installed 5/16 Inch Lugs
Both ends come with 5/16 inch lugs already installed. You can bolt the cables to inverter terminals, battery posts and bus bars without crimping your own lugs.
Durable PVC Insulation
The flexible PVC jacket is VW-1 flame rated and moisture resistant. Rich Solar lists an operating range of -40°F to 221°F and a voltage rating of up to 600V.
Red and Black Pair
Each set includes one red cable for positive and one black cable for negative, which makes polarity easy to identify during installation and service.
Nine Length Options
Lengths run from 1 ft to 10 ft. Short 1 ft and 1.5 ft sets work well for linking batteries side by side, while longer sets reach an inverter mounted on a nearby wall or shelf.
Real-World Applications
Inverter to battery. Connect an off-grid or RV inverter directly to its battery bank.
Battery banks. Link batteries in series or parallel with short matched cables.
RVs and vans. Wire a house battery bank to an inverter, bus bar or shunt.
Marine systems. Make heavy DC connections in battery compartments with moisture-resistant insulation.
How It Compares to Common Alternatives
Versus making your own cables. Pre-installed lugs save you from buying a heavy-duty crimper and lugs, and they reduce the risk of a poor crimp at a high-current connection.
Versus 2 AWG or 6 AWG cable. The 4 AWG cable sits between the two. 2 AWG is thicker with less voltage drop for larger inverters, while 6 AWG is lighter and easier to route for smaller loads.
Versus controller-to-battery cable. Solar charge controllers carry much less current than inverters, so they use lighter 8 or 10 AWG cable. Inverter connections need heavy cable like this.
Is This Cable the Right Fit
-
Gauge. Use the cable size your inverter manual specifies for its power rating and your battery voltage.
-
Lug size. Both ends have 5/16 inch lugs. Check that they fit your inverter and battery terminals.
-
Length. Keep inverter cables as short as practical, since longer runs add voltage drop.
-
Fusing. Add a properly sized fuse, such as an ANL fuse, between the battery and the inverter.
This may be a good fit if
- You are connecting an inverter to a battery bank
- Your terminals take 5/16 inch lugs
- You want pure copper cable with lugs already installed
- You want matched red and black cables in a set length
Common Questions
Is the Length Per Cable?
Yes. Each option includes one red and one black cable, and each cable is the length you select.
What Size Are the Lugs?
Both ends of each cable have 5/16 inch lugs.
Which Inverter Size Needs 4 AWG Cable?
It depends on the inverter's power, your battery voltage and the cable length. Follow your inverter manual's cable size chart, and contact our team if you are unsure.
What's Included
- 1 x Red and 1 x Black 4 AWG Pure Copper Battery Cable With 5/16 Inch Lugs on Both Ends (Length per Option Selected)
Secure, Heavy-Duty Battery Connections
The Rich Solar 4 Gauge (AWG) Black and Red Pure Copper Inverter Battery Cables give you pure copper cable with pre-installed 5/16 inch lugs for clean inverter and battery connections. At Outbound Power, we help customers choose the right cable gauge, length and fusing for their systems. If you have questions, our team is happy to help.
Rich Solar 4 Gauge (AWG) Black and Red Pure Copper Inverter Battery Cables Specifications
|
| Wire Gauge |
4 AWG |
| Cable Set |
Red and black pair |
| Lug Size |
5/16 in, both ends |
| Available Lengths |
1 ft, 1.5 ft, 2 ft, 3 ft, 4 ft, 5 ft, 6 ft, 8 ft, 10 ft |
| Conductor Material |
100% pure copper (665-strand) |
| Insulation Material |
PVC, moisture resistant |
| Flame Rating |
VW-1 |
| Voltage Rating |
Up to 600V |
| Operating Temperature |
-40°F to 221°F |
| Compliance |
UL certified |
| Package Dimensions |
16 x 11 in |
| SKU by Length |
| 1 ft (RS-4A1F5) |
Red and black set, 1 lb gross weight |
| 1.5 ft (RS-4A1H5F5) |
Red and black set |
| 2 ft (RS-4A2F5) |
Red and black set |
| 3 ft (RS-4A3F5) |
Red and black set, 2 lbs gross weight |
| 4 ft (RS-4A4F5) |
Red and black set |
| 5 ft (RS-4A5F5) |
Red and black set |
| 6 ft (RS-4A6F5) |
Red and black set |
| 8 ft (RS-4A8F5) |
Red and black set |
| 10 ft (RS-4A10F5) |
Red and black set |