The Rich Solar NOVA 6500S Hybrid Inverter Delivers 6500W of Pure Sine Power and Up to 8000W of Dual MPPT Solar Input for 48V Off-Grid Homes and Cabins
The Rich Solar NOVA 6500S (model RS-H6548S) is a 6.5kW off-grid hybrid inverter for 48V battery systems. It combines a 6,500W pure sine wave inverter, two MPPT solar inputs that accept up to 8,000W in total, and a 120A battery charger, so solar, batteries, utility power and a generator all work through one wall-mounted unit.
Rich Solar builds it for homes, cabins, tiny homes, ADUs, campers, RVs and other off-grid setups. A 5-inch color LCD touchscreen with an RGB light ring shows system status, built-in Wi-Fi works with the RICH SOLAR mobile app, and Rich Solar states that the NOVA 6500S is UL 1741 certified.
Rich Solar NOVA 6500S Hybrid Inverter Features
6500W of Pure Sine Power With a 13000VA Surge
The inverter supplies 6,500W (6,500VA) at 120VAC ±5% with a pure sine waveform and 91% peak efficiency. Surge capacity is 13,000VA, twice the rated power for 5 seconds, to help start motors and compressors. Output is 60Hz by default and can be set to 50Hz, and the output voltage can be set to 110V, 120V or 127V. No-load power draw is under 75W.
Two MPPT Solar Inputs With 8000W Total
Each of the two PV inputs handles up to 4,000W, for 8,000W in total. Rich Solar's spec sheet and manual list an MPPT range of 90V to 230V DC, a maximum open-circuit voltage of 250V DC, and a maximum of 18A per input. Solar charging reaches up to 120A, and PV connectors for both inputs come in the box.
120A Charging From Solar, Utility or Both
Maximum charge current is 120A, set from 10A to 120A in 10A steps, and the utility charger can also reach 120A. Charger priority can be Solar First, Solar and Utility, or Only Solar. Output priority can be Utility First, Solar First or SBU, which runs loads on solar, then battery, and turns to utility when the battery is low. A timer can also schedule AC and PV output use.
Touchscreen, RGB Status Ring and Wi-Fi Monitoring
The 5-inch color LCD uses touch-sensitive keys, and the RGB LED ring around it shows status with three lighting effects: Cycling, Wheel and Chasing. Built-in Wi-Fi supports mobile monitoring through the RICH SOLAR app. A USB port supports On-the-Go functions, and event logs are stored in the inverter.
BMS, Dry Contact and 12V DC Outputs
A reserved BMS port supports RS485, CAN-BUS and RS232 for lithium battery communication. Other connections include USB, RS232, Wi-Fi and a dry contact rated 3A at 250VAC, which can signal an external device when the battery reaches a set level. Three 12V DC jacks, rated 3A each with their own on/off switch, can keep a router, modem or other small DC device running during an outage.
Parallel Operation With Up to Six Units
Up to six NOVA 6500S inverters can run in parallel, for up to 39kW in single phase. The manual also covers three-phase systems and split-phase systems, with up to five units on one phase of a split-phase system for up to 32.5kW per phase. The parallel communication cable and current sharing cable are included.
Replaceable Fan and Anti-Dust Kit
The fan is designed to be replaceable, and a factory-installed anti-dust kit with a removable air filter keeps dust out of the inverter. The manual recommends cleaning the filter once a month. Protection covers overload, over-temperature and short circuits.
Real-World Applications
Off-grid homes and cabins. Run 120V household loads from a 48V battery bank charged by up to 8,000W of solar, with a generator on the AC input as backup.
Tiny homes and ADUs. Pair a compact battery bank with rooftop solar and switch between solar, battery and utility power by priority.
Larger systems. Add inverters in parallel for more power or split-phase output as your loads grow.
Practical Comparison
NOVA 6500S Versus Separate Components
A system built from a standalone inverter, two charge controllers, an AC battery charger and a source switch has more parts to wire and set up. The NOVA 6500S puts the inverter, two MPPT inputs and the charger in one case, with one touchscreen, one app and one set of priorities.
NOVA 6500S Versus a Modified Sine Inverter
A modified sine inverter can run simple loads but isn't suited to every device. The NOVA 6500S produces pure sine wave output and adds solar charging, AC charging, parallel capability and app monitoring that a basic inverter lacks.
Buyer Guidance
Battery, Cable and Breaker Sizing
This model runs on a 48V battery bank. For a single unit, the manual lists 2/0 AWG battery cable sized for a typical current of 153A with a 250Ah battery, a 250A, 70V DC battery breaker, 4 AWG AC wiring and a 60A AC input breaker. Install 600V DC, 30A circuit breakers between the panels and the inverter, and use a PV junction box with surge protection. Because the inverter is non-isolated, the manual accepts only monocrystalline, class A polycrystalline or ungrounded CIGS panels.
Mounting and Installation
Mount the NOVA 6500S vertically on concrete or another non-combustible surface at eye level. The included bracket fastens to the wall with six M5 screws, and the mounting ears attach to the back of the inverter. Leave about 20 cm (7.9 in) at the sides and 50 cm (19.7 in) above and below for airflow. Rich Solar rates operation from 14°F to 104°F. The manual says only qualified personnel should install it.
This May Be A Good Fit If
- You run a 48V battery bank
- Your loads stay under 6,500W running
- You want two solar inputs and up to 8,000W of PV
- You want a UL 1741 certified off-grid inverter
- You may add inverters in parallel later
Common Questions
Which Batteries Does It Support?
Rich Solar lists AGM, gel, flooded and lithium batteries. Bulk voltage is 58.4V for flooded and 56.4V for AGM or gel, with a 54V float. The manual includes lithium profiles that set charge values automatically and a user-defined setting.
How Much Solar Can I Connect?
Up to 4,000W on each of the two inputs, or 8,000W total. Keep each string under 250V open-circuit voltage, inside the 90V to 230V MPPT range, and at no more than 18A.
Can It Run on Generator Power?
Yes. The AC input accepts utility or generator power at 120V nominal, up to 60A. Appliance mode accepts 80V to 140V and UPS mode accepts 90V to 140V, with transfer times of 20ms and 10ms.
Can I Get Split-Phase Power?
Yes, with two or more units in parallel. The manual covers split-phase systems with up to six NOVA 6500S inverters.
What's Included
- 1 x Rich Solar NOVA 6500S Hybrid Inverter (RS-H6548S)
- 1 x Software CD
- 1 x RS-232 Cable
- 1 x Parallel Communication Cable
- 1 x Current Sharing Cable
- 1 x DC Fuse
- 4 x Cable Glands
- 2 x Sets of PV Connectors
- 1 x Mounting Bracket
- 2 x Mounting Ears
- 6 x M5 Screws
- 1 x User Manual
Off-Grid Power for Homes and Cabins in One Unit
The Rich Solar NOVA 6500S Hybrid Inverter gives a 48V system 6,500W of pure sine power, two MPPT solar inputs, 120A charging, Wi-Fi monitoring and room to grow in parallel, with UL 1741 certification. If you'd like help planning the array, battery bank or wiring, the Outbound Power team is happy to help.
Rich Solar NOVA 6500S 6500W 48V Off-Grid Hybrid Solar Inverter Specifications
|
| Model |
RS-H6548S |
| Inverter Output |
| Rated Output Power |
6500W (6500VA) |
| Surge Power |
13000VA (2x rated power for 5 seconds) |
| Output Waveform |
Pure sine wave |
| Output Voltage |
120VAC ±5% |
| Output Voltage Settings |
110V, 120V (default), 127V |
| Output Frequency |
60Hz (default) or 50Hz |
| Peak Efficiency |
91% |
| Total Harmonic Distortion |
<5% linear load, <10% non-linear load |
| No-Load Power Consumption |
<75W |
| Overload Protection |
100ms at 205% load, 5s at 150% load, 10s at 110% to 150% load |
| Output Priority Modes |
Utility First, Solar First, SBU |
| Solar Charger |
| Charger Type |
MPPT, 2 PV inputs |
| Maximum PV Input Power |
8000W (4000W x 2) |
| MPPT Operating Voltage Range |
90VDC to 230VDC |
| Maximum PV Open Circuit Voltage |
250VDC |
| Maximum PV Input Current |
18A x 2 |
| PV Start-Up Voltage |
80V ±5VDC |
| Maximum Solar Charge Current |
120A |
| AC Input and Charger |
| Input Waveform |
Sinusoidal (utility or generator) |
| Nominal Input Voltage |
120VAC |
| Input Voltage Range (UPS) |
90VAC to 140VAC |
| Input Voltage Range (Appliances) |
80VAC to 140VAC |
| Maximum AC Input Voltage |
150VAC |
| Maximum AC Input Current |
60A |
| Input Frequency |
50Hz / 60Hz (auto detection) |
| Transfer Time |
10ms (UPS), 20ms (appliances) |
| Line Mode Efficiency |
>95% |
| Maximum AC Charge Current |
120A |
| Maximum Charge Current |
120A, set from 10A to 120A in 10A steps |
| Charger Source Modes |
Solar First, Solar and Utility (default), Only Solar |
| Battery |
| Nominal DC Voltage |
48VDC |
| Compatible Battery Types |
AGM, gel, flooded, lithium, user-defined |
| Charging Algorithm |
3-step (bulk, absorption, float) |
| Bulk Charging Voltage |
58.4VDC flooded, 56.4VDC AGM / gel |
| Float Charging Voltage |
54VDC |
| Overcharge Protection |
66VDC |
| Low DC Cut-Off Voltage |
44.0V (<20% load), 40.8V (20% to 50%), 38.4V (50% and above) |
| High DC Cut-Off Voltage |
66VDC |
| Recommended Battery Cable |
2/0 AWG, 153A typical, 250Ah battery |
| Recommended Battery Breaker |
250A / 70VDC per inverter |
| Monitoring and Communication |
| Display |
5 in color LCD with touch keys |
| Status Lights |
RGB LED ring (Cycling, Wheel, Chasing effects) |
| Communication Interface |
USB, RS232, RS485, Wi-Fi, dry contact |
| App |
RICH SOLAR mobile app (Wi-Fi) |
| BMS Port |
RS485, CAN-BUS, RS232 |
| USB |
USB On-the-Go function |
| Dry Contact |
3A / 250VAC |
| DC Output |
3 x 12V DC jacks, 3A each, 100W total (5.5 x 2.5 mm) |
| Data Log |
Events stored in the inverter |
| Parallel Operation |
| Maximum Parallel Units |
6 |
| Single Phase |
Up to 6 units, 39kW / 39kVA |
| Three Phase |
Up to 6 units, max 4 units on one phase |
| Split Phase |
Up to 6 units, max 5 units on one phase, 32.5kW per phase |
| Parallel Communication |
CAN |
| Transfer Time in Parallel Mode |
50ms max |
| Physical |
| Dimensions (D x W x H) |
6.2 x 19.8 x 20.9 in (158.4 x 503.6 x 530.8 mm) |
| Net Weight |
44 lb (20 kg) |
| Operating Temperature |
14°F to 104°F (-10°C to 40°C) |
| Storage Temperature |
5°F to 140°F (-15°C to 60°C) |
| Humidity |
5% to 95% RH, non-condensing |
| Cooling |
Replaceable fan, built-in anti-dust kit |
| Mounting |
Vertical, wall bracket, concrete or other non-combustible surface |
| Recommended AC Input Breaker |
60A (single unit) |
| AC Wire Size |
4 AWG |
| PV Circuit Breaker |
600VDC / 30A |
| Certifications |
| Safety Certification |
UL 1741 (Rich Solar) |
| Certificate |
cTUVus co-license, UL 1741 and CSA C22.2 No. 107.1-16 |
Rich Solar NOVA 6500S 6500W 48V Off-Grid Hybrid Solar Inverter Manuals and Documents
Rich Solar NOVA 6500S User Manual
Rich Solar NOVA 6500S Specification Sheet
Rich Solar NOVA 6500S UL 1741 Certification Report