The SunGold Power 16kW 48VDC Off-Grid Solar Kit Runs High-Demand Homes on Two 8000W Inverters and a 14400W Bifacial Array
The SunGold Power 16kW 48VDC Off-Grid Solar Kit combines two 8000W split phase inverters, thirty-two 450W bifacial N-type panels and five 5.12kWh LiFePO4 batteries in an enclosed cabinet. It also includes DC and PV breakers, 2/0 AWG battery cables, four sets of PV extension cables and Z-brackets for every panel. You can choose standard SG48100P batteries or self-heating SGH48100T batteries, and both options give 25.6kWh of storage.
SunGold says the system will produce up to 53kWh per day with only 4 hours of sunlight. It is sized for homes with high-demand appliances such as an air conditioner, well pump, refrigerator, power tools and office equipment. As loads grow, you can add panels, batteries and up to six identical inverters in total.
SunGold Power 16kW 48VDC Off-Grid Solar Kit Features
Two 8000W Inverters for 16000W of Split Phase Power
Each SPH8048P inverter is rated at 8,000W with a 16,000W peak and a 5HP motor load capacity. Output is pure sine wave at 120/240Vac, split phase or single phase, with a typical 10ms switch time. SunGold lists the inverter as UL 1741 by ETL for off-grid solar systems.
14400W Bifacial Array on Four MPPT Inputs
SunGold's wiring diagram connects the panels as four strings of eight in series, one string per MPPT input, each with its own 25A PV breaker. Every inverter has two MPPT trackers that accept up to 11,000W of PV, 500Vdc open circuit and 22A per input, with 99.9% tracking efficiency.
Fast Battery Charging
Each inverter charges the battery bank at up to 200A from solar, 100A from a utility or generator and 180A in hybrid mode. That helps refill 25.6kWh of storage after a heavy evening of use.
Choice of Standard or Self-Heating Batteries
Both battery options use 51.2V 100Ah LiFePO4 modules of 5.12kWh each. The SG48100P supports 100A continuous charge and discharge and up to 63 units in parallel. The SGH48100T adds a heater that switches on between -13°F and 41°F and turns off at 53.6°F, so the battery stays ready to charge in cold weather.
Bifacial N-Type Panels
Each 450W panel has a module efficiency of 22.5%, and SunGold says the rear side can harvest up to an additional 30% energy from reflected light. The dual glass panels are certified for 5400 Pa snow loads and 2400 Pa wind loads.
Generator Connection and Wi-Fi Monitoring
SunGold describes a transformer-free design with a dedicated generator connection and built-in breakers. No-load consumption is 95W, and SunGold lists Wi-Fi app monitoring and time-slot charging and discharging for this inverter.
Real-World Applications
High-demand off-grid homes. Run air conditioning, a well pump and kitchen appliances from 240V split phase power.
Cold-climate properties. Choose the self-heating battery option for an unheated battery room or garage.
Workshops and outbuildings. Run power tools and office equipment on two 8000W inverters with a 16,000W peak each.
Generator-backed homesteads. Use the generator connection to recharge the batteries during long cloudy periods.
How It Compares to Common Alternatives
Standard versus self-heating batteries. The SG48100P allows 100A of charge current and up to 63 batteries in parallel, and SunGold lists UL1973, UL9540A, CE and UN38.3. The SGH48100T adds self-heating, with a 70A maximum charge current, up to 32 in parallel and a UL1973 listing.
Versus single-sided panels. Bifacial panels can add rear-side output where the back of the array sees reflected light.
Versus buying parts separately. Inverters, cabinet, batteries, panels, breakers and cables come matched in one kit with a SunGold wiring diagram for each battery option.
Is This Solar Kit the Right Fit
-
Indoor equipment space. The inverters are IP20 rated for indoor use only, and each measures 17.7 x 25.6 x 5.1 inches.
-
Array space. Thirty-two panels each measure 69.37 x 44.65 x 1.38 inches and weigh 53.35 lbs.
-
Battery temperature. If the batteries will sit in a cold space, consider the SGH48100T self-heating option.
-
Local rules. Install to local requirements and regulations, per SunGold's inverter manual.
This may be a good fit if
- You need 16000W of split phase output
- You run heavy loads like air conditioning
- You want up to 53kWh of daily solar potential
- You may expand to more inverters later
Common Questions
What Is the Difference Between the Two Battery Options?
Both give 25.6kWh from five 5.12kWh batteries in the same cabinet. The SGH48100T version adds automatic self-heating for cold conditions. Everything else in the kit is the same.
How Much Energy Can the Array Produce?
SunGold says up to 53kWh per day with only 4 hours of sunlight. Actual results depend on location, season and mounting.
Can I Expand to Three Phase Power?
Yes, with more inverters. Up to six identical units can be paralleled, and 208V three phase needs more than three. Each inverter needs its own independent PV array, and all must share one battery bank.
Does the Kit Need a Generator?
No. A generator is optional. When solar and battery power are not available, the inverters can run loads and charge the batteries from a utility or generator source.
What's Included
5 x SG48100P (25.6kWh)
- 2 x 8000W 48Vdc 120/240Vac Inverters, Up to 6 Units Parallel
- 32 x 450W Bifacial N-Type Monocrystalline Solar Panels
- 5 x 100Ah 51.2V LiFePO4 Batteries
- 1 x Enclosed Battery Cabinet for 5 x 100Ah 51.2V LiFePO4 Batteries
- 4 Sets x 50 Feet Solar Extension Cables, Inverter PV Input
- 32 Sets of Mounting Z-Brackets
- 2 x 200A DC Breakers
- 4 x 25A PV Breakers
- 4 Sets x 2/0 AWG Cables, Breaker to Battery or Inverter Connection
5 x SGH48100T Self-Heating (25.6kWh)
- 2 x 8000W 48Vdc 120/240Vac Inverters, Up to 6 Units Parallel
- 32 x 450W Bifacial N-Type Monocrystalline Solar Panels
- 5 x 100Ah 51.2V LiFePO4 Batteries, Self-Heating
- 1 x Enclosed Battery Cabinet for 5 x 100Ah 51.2V LiFePO4 Batteries
- 4 Sets x 50 Feet Solar Extension Cables, Inverter PV Input
- 32 Sets of Mounting Z-Brackets
- 2 x 200A DC Breakers
- 4 x 25A PV Breakers
- 4 Sets x 2/0 AWG Cables, Breaker to Battery or Inverter Connection
Whole-Home Off-Grid Power in One Kit
The SunGold Power 16kW 48VDC Off-Grid Solar Kit gives a high-demand home 16000W of split phase power, a 14400W bifacial array and 25.6kWh of LiFePO4 storage, with a self-heating battery option for cold sites. At Outbound Power, we help customers choose battery options and plan off-grid systems. If you have questions, our team is happy to help.
SunGold Power 16kW 48VDC Off-Grid Solar Kit (SGR-16K25E / SGR-16K25T) Specifications
|
| Kit Summary |
| Kit Models |
SGR-16K25E (5 x SG48100P); SGR-16K25T (5 x SGH48100T self-heating) |
| Inverters |
2 x 8000W 48V split phase solar inverters (SPH8048P), 16000W combined rated output |
| Battery Bank, SG48100P Option |
5 x SG48100P 51.2V 100Ah LiFePO4 in an enclosed cabinet, 25.6kWh total |
| Battery Bank, SGH48100T Option |
5 x SGH48100T 51.2V 100Ah self-heating LiFePO4 in an enclosed cabinet, 25.6kWh total |
| Solar Array |
32 x 450W bifacial N-type monocrystalline panels (SGN-450-BDG5), 14400W total |
| String Layout |
4 strings of 8 panels in series, one string per MPPT input |
| Estimated Daily Output |
Up to 53kWh per day with 4 hours of sunlight |
| Output Voltage |
120/240Vac split phase or 120Vac single phase |
| System Voltage |
48VDC |
| Certificates, SGR-16K25E |
Inverter: UL 1741 by ETL for Off Grid Solar System; Batteries: UL1973/UL9540A/CE/UN38.3; Solar panels: UL61730/CE/TUV |
| Certificates, SGR-16K25T |
Inverter: UL 1741 by ETL for Off Grid Solar System; Batteries: UL1973; Solar panels: UL61730/CE/TUV |
| Inverter (Each, SPH8048P) |
| Rated Output Power |
8,000W |
| Max. Peak Power |
16,000W |
| Rated Output Voltage |
120/240Vac (split phase/single phase) |
| Load Capacity of Motors |
5HP |
| Rated AC Frequency |
50/60Hz |
| Waveform |
Pure sine wave |
| Switch Time |
10ms (typical) |
| Parallel Capacity |
Up to 6 units |
| Battery Type |
Li-ion / lead-acid / user defined |
| Rated Battery Voltage |
48Vdc (range 40-60Vdc) |
| Max. MPPT Charging Current |
200A |
| Max. Mains/Generator Charging Current |
100A |
| Max. Hybrid Charging Current |
180A |
| MPP Trackers |
2 |
| Max. PV Array Power |
11,000W |
| Max. Input Current |
22/22A |
| Max. Open Circuit Voltage |
500Vdc |
| MPPT Voltage Range |
125-425Vdc |
| AC Input Voltage Range |
90-140V (single phase) |
| Bypass Overload Current |
63A |
| MPPT Tracking Efficiency |
99.9% |
| Max. Battery Inverter Efficiency |
92% |
| No-Load Consumption |
95W |
| Dimensions |
17.7 x 25.6 x 5.1 in |
| Weight |
53.5lb |
| Protection Degree |
IP20, indoor only |
| Operating Temperature |
14~131°F, derated above 113°F (-10~55°C, derated above 45°C) |
| Noise |
<60dB |
| Communication |
RS485 / CAN / USB / dry contact; Wi-Fi / GPRS optional external modules |
| Safety Certification |
IEC62109-1, IEC62109-2, UL1741 |
| Warranty |
2 years |
| Battery (Each, SG48100P Standard) |
| Chemistry |
Lithium iron phosphate |
| Nominal Voltage |
51.2V |
| Rated Capacity |
100Ah |
| Nominal Energy |
5.12kWh |
| Recommended Charging Voltage |
54.5V |
| Charging Limited Voltage |
57.6V |
| Discharge Cut-Off Voltage |
43.2V |
| Standard Charge / Discharge Current |
50A / 50A |
| Max. Continuous Charge / Discharge Current |
100A / 100A |
| Cycle Life |
≥7000 (80% DOD) |
| Design Life |
15 years |
| Max. Batteries in Parallel |
63 |
| Communication |
RS232 / RS485 / CAN |
| Display |
LCD |
| Dimensions (L x W x H) |
442 x 460 x 133 mm (3U) |
| Weight |
Around 43kg |
| Protection Class |
IP20 battery box |
| Working Temperature |
Charging 0~45°C; discharging -20~60°C |
| Warranty |
10 years |
| Battery (Each, SGH48100T Self-Heating) |
| Chemistry |
Lithium iron phosphate |
| Rated Voltage |
51.2V |
| Nominal Capacity |
100Ah |
| Nominal Energy |
5.12kWh (usable 4.92kWh at 0.5C) |
| Voltage Range |
44.8~57.6V |
| Charge Voltage |
56.0V |
| Float Charge Voltage |
54.6V |
| Standard Charge / Discharge Current |
≤50A / ≤50A |
| Max. Charge Current |
70A |
| Max. Discharge Current |
100A (initial temperature ≤86°F / 30°C) |
| Peak Discharge Current |
101~119A for 5 minutes; 120~200A for 15 s |
| Self-Heating |
Activates at -13°F to 41°F (-25°C to 5°C); stops at 53.6°F (12°C) |
| Cycle Life |
Over 7000 cycles |
| Max. Batteries in Parallel |
32 |
| Communication |
RS485 / CAN |
| Dimensions |
19.3 x 17.3 x 5.2 in (490 x 441 x 133 mm) |
| Weight |
103lb (~47kg) |
| Operating Temperature |
Charge 14°F to 122°F (-10~50°C); discharge -4°F to 122°F (-20~50°C) |
| Warranty |
10 years |
| Solar Panel (Each, SGN-450-BDG5) |
| Peak Power (Pmax) |
450W |
| Module Efficiency |
22.5% |
| Cell Type |
N-type monocrystalline, bifacial dual glass, 96 cells |
| Bifaciality |
80±10% |
| Maximum Power Voltage (Vmp) |
30.08V |
| Maximum Power Current (Imp) |
14.97A |
| Open Circuit Voltage (Voc) |
35.03V |
| Short Circuit Current (Isc) |
16.05A |
| Maximum System Voltage |
1500V |
| Mechanical Load |
5400 Pa front (snow), 2400 Pa rear (wind) |
| Junction Box |
IP68 |
| Dimensions |
69.37 x 44.65 x 1.38 in (1762 x 1134 x 35 mm) |
| Weight |
53.35 lbs (24.2 kg) |
| Operating Temperature |
-40°F to 185°F (-40°C to 85°C) |
| Certifications |
UL61730 certified by ETL, CEC Listed |
| Warranty |
12 years material and workmanship; 30 years linear power |
SunGold Power SGR-16K25E Solar Kit Manuals
SunGold Power SGR-16K25E Solar Kit Inverter Manual
SunGold Power SGR-16K25E Solar Kit SG48100P Battery Manual
SunGold Power SGR-16K25E Solar Kit SGH48100T Battery Manual
SunGold Power SGR-16K25E Solar Kit Panel Data Sheet
SunGold Power SGR-16K25E Wiring Diagram
SunGold Power SGR-16K25T Wiring Diagram