The SunGold Power 200 Feet Solar Cable Extends Your Array Wiring With 200 Feet of 10 AWG Cable
The SunGold Power 200 Feet Solar Cable is a 10 AWG solar extension cable, 200 feet long. It carries power from your solar panels to the rest of your system when the array sits a long way from your equipment.
It is for homeowners, cabin owners and installers who need a long run between a ground-mount or roof array and a charge controller or inverter.
SunGold Power 200 Feet Solar Cable Features
10 AWG Wire Gauge
The cable uses 10 AWG wire. Over a long run, heavier wire loses less power than thinner wire of the same length.
200 Feet of Length
Two hundred feet gives you room to reach an array placed well away from the house, shed or equipment room.
Made for Solar Extension
SunGold lists it as a solar extension cable. It is meant to extend the wiring between your panels and the rest of your system.
SunGold Part SC-10AWG200F
The cable is SunGold part SC-10AWG200F. Ordering by part number helps you match an existing SunGold install.
Real-World Applications
Ground-mount arrays. Reach a ground mount set back from the building where your equipment lives.
Cabins and outbuildings. Bring solar power from an open, sunny spot to a cabin or shed in the trees.
Array expansions. Wire in new panels placed farther from the existing array.
How It Compares to Common Alternatives
Versus short pre-made cables. Short cables suit panels close to your equipment. A 200 foot length covers long distances without joining many short pieces.
Versus thinner wire. Smaller gauges cost less but lose more power over long runs. A 10 AWG cable keeps those losses lower across the same distance.
Is This Solar Cable the Right Fit
-
Gauge. The cable is 10 AWG. Check that this suits your array current and the input of your charge controller or inverter.
-
Length. The cable is 200 feet long. Work out voltage drop for the full distance of your run.
-
Connectors. SunGold does not list the connector type or whether the ends come terminated. Confirm this before you plan the install.
-
Installation. Route and protect the cable to suit your site and local code. A qualified installer can help.
This may be a good fit if
- Your array sits far from your equipment
- Your system calls for 10 AWG solar wire
- You want SunGold's own part, SC-10AWG200F
Common Questions
What Gauge Is This Cable?
It is 10 AWG.
How Long Is It?
It is 200 feet long.
What Is It Used For?
It extends solar wiring between your panels and the rest of your system, such as a charge controller or inverter.
What's Included
- 1 x SunGold Power 200 Feet Solar Cable
Long-Distance Wiring for Your Solar Array
The SunGold Power 200 Feet Solar Cable gives you 200 feet of 10 AWG solar extension cable for arrays placed away from your equipment. At Outbound Power, we help customers plan panel layouts, cable runs and charge controllers. If you have questions, our team is happy to help.
SunGold Power 200 Feet Solar Cable Specification
|
| Brand |
SunGold Power |
| Model |
SC-10AWG200F |
| Product Type |
Solar Extension Cable |
| Wire Gauge |
10 AWG |
| Length |
200 ft |