SunGold Power 4000W DC 12V Split Phase Pure Sine Wave Inverter With Charger
We Beat Any Price
Found the same price or less? Just ask & we'll beat it.
Found the same price or less? Just ask & we'll beat it.
The SunGold Power 4000W DC 12V Split Phase Pure Sine Wave Inverter With Charger is a low frequency inverter charger that produces split phase 120/240 volt pure sine wave power from a 12 volt battery bank. It provides two 120 volt legs, so it can feed a standard 120/240V panel and run both 120 volt loads and 240 volt appliances.
Like the rest of SunGold's LFP series, it combines an inverter, a battery charger, and an automatic transfer switch. It accepts 240VAC from the grid or a generator, passes that power through to your loads, and recharges your batteries at up to 120 amps.
Two 120V legs make this inverter suitable for small homes, cabins, and businesses with a 120/240V electrical panel. You can run 120V lighting and outlets alongside 240V equipment such as well pumps, provided the total load stays within the inverter's rating.
The low frequency transformer supports a 12000 watt surge for 20 seconds, giving motor loads the startup power they need while 4000 watts continuous covers steady use.
With 240VAC input present, the built-in 3-step charger delivers up to 120 amps (±5A). Nine battery type settings and an adjustable 0 to 100 percent charge current let you set it up for lithium, AGM, gel, or flooded batteries.
Typical transfer time is 10ms. The AC input range can be set to 140 to 270VAC or 184 to 253VAC with SW2, which helps when running from a generator whose voltage varies.
Choose AC priority for backup or battery priority (SW5) for solar-charged systems. The inverter can automatically start and stop a compatible generator based on battery voltage.
SunGold includes a remote control and battery temperature sensor cable. Power saver mode reduces idle draw from 45 watts to 18 watts, and output frequency can be set to 50 or 60Hz with SW4.
Small homes and cabins. Feed a 120/240V panel from a 12V battery bank for lights, outlets, and 240V appliances.
Boats and RVs. Provide split phase power for onboard systems that use both 120V and 240V circuits.
Small business backup. Keep refrigeration, lighting, and equipment running during outages with automatic transfer.
Generator-supported off-grid systems. Use automatic generator start with a 240V generator to keep the battery bank charged.
Versus the single phase 4000W 12V model. The single phase version takes 120VAC input and provides only 120V output. This split phase model requires 240VAC input and adds 240V output.
Versus 24V and 48V split phase inverters. Higher battery voltages reduce DC current and cable size. This 12V model makes sense when you already have a 12V battery bank.
Versus grid-tie or stackable systems. SunGold notes this unit cannot be stacked and cannot run on the same grid with other inverters, such as microinverters.
This may be a good fit if
No. SunGold specifies 240V AC input, 120V and 240V AC output, and 12V DC.
No. SunGold says it cannot work with other inverters on the same grid and is not stackable.
45 watts with power saver off and 18 watts with power saver on.
SunGold lists a 12 month warranty for this model.
The SunGold Power 4000W DC 12V Split Phase Pure Sine Wave Inverter With Charger brings 120/240V output, a 12000 watt surge, and a 120 amp charger to 12 volt battery systems. At Outbound Power, we help customers plan backup and off-grid systems that match their panels, loads, and batteries. If you have questions about wiring a split phase system, our team is happy to help.
SunGold Power 4000W DC 12V Specifications |
|
|---|---|
| Model | LFP4K12V240VSP |
| Continuous Output Power | 4000W |
| Surge Rating | 12000W (20 seconds) |
| Output Waveform | Pure sine wave |
| AC Output Voltage | 120VAC and 240VAC split phase |
| AC Input Voltage | 240VAC |
| Output Frequency | 50Hz or 60Hz (selectable via SW4) |
| Typical Transfer Time | 10ms (max) |
| Nominal Efficiency | >88% |
| Nominal Input Voltage | 12.0VDC |
| Minimum Start Voltage | 10.0VDC |
| Low Battery Alarm | 10.5VDC to 11.0VDC |
| Low Battery Trip | 10.0VDC to 10.5VDC (selectable via SW1) |
| High Voltage Alarm | 16.0VDC |
| Low Battery Voltage Restart | 13VDC |
| Idle Consumption | 45W |
| Power Saver Mode Idle Consumption | 18W |
| Charger Rate | 120A ±5A |
| AC Input Range | 140V to 270VAC or 184V to 253VAC (selectable via SW2) |
| Overcharge Protection Shutdown | 15.7V |
| Charge Settings | 9 battery type settings, 3-step charging |
| Adjustable Charge Current | Off, 0% to 100% |
| Unit Dimensions | 25.6 x 9.1 x 7.5 in |
| Unit Weight | 58.9 lb |
| Shipping Dimensions | 30.3 x 13.4 x 12.8 in |
| Shipping Weight | 67.9 lb |
| Warranty | 12 months |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
placeholder