The SunGold Power 500 Watt Bifacial N-Type Monocrystalline Solar Panel Delivers 22.5% Efficiency and Rear-Side Energy Gain in a 108-Cell Dual Glass Module
The SunGold Power 500 Watt Bifacial N-Type Monocrystalline Solar Panel (model SGN-500-BDG6) is a dual glass module with 108 N-type monocrystalline cells. It produces 500W from the front side at 22.5% module efficiency, and its bifacial design also collects reflected light on the rear. It is UL 61730 certified by ETL.
It suits home, cabin and off-grid arrays where the back of the panel sees reflected light, such as ground brackets, flat roofs, vertical surfaces and poles. At 77.17 x 44.65 inches, it sits between SunGold's 450W and 590W bifacial panels in size. We sell it in packs of 2 to 20 identical panels, in steps of two.
SunGold Power 500 Watt Bifacial N-Type Monocrystalline Solar Panel Features
500 Watts at 22.5% Module Efficiency
At standard test conditions the front side produces 500W at 33.10V and 15.11A. Higher efficiency means an array needs less space for the same output.
Rear-Side Gain of Up to 30%
Bifacial technology lets the module harvest up to an additional 30% energy from the rear side. SunGold puts the ceiling at up to 650W with rear-side gain and notes that actual output depends on installation and conditions. Bifaciality is rated at 80 ±10%.
N-Type Cells Without LID
N-type cells have no LID naturally, which can increase power generation. SunGold says a 30-year lifespan brings 10-30% additional power generation compared with a conventional P-type module.
Half-Cell 16-Busbar Design for Partial Shade
The 108 cells are arranged as two groups of 54 in a half-cell, 16-busbar layout. When shade falls on the top section of a cell, the lower section continues working, which lowers power loss compared with a conventional full cell.
Lower Operating Current and Low-Light Performance
The design is optimized for lower operating current, which minimizes hot spot loss. The power temperature coefficient is -0.30%/K, and SunGold rates the module for excellent low irradiance performance. Every module goes through a 100% triple EL test to reduce hidden cracks.
Dual Glass Built for Snow, Wind and Hail
The front is 2.0mm tempered glass with a highly transparent anti-reflection coating, paired with black back glass in an anodized aluminum alloy frame. The panel is certified for 5400 Pa of snow load and 2400 Pa of wind load, and it passed a 35mm hailstone test.
IP68 Junction Box and MC4-Compatible Leads
The junction box is IP68 rated and holds 3 diodes. Each lead is 1200mm (47.24 in) of 12 AWG (4mm²) PV cable with MC4-compatible connectors.
30-Year Linear Power Warranty
SunGold provides a 12-year material and workmanship warranty and a 30-year linear power warranty. First-year power degradation is no more than 1%, with 0.40% annual degradation over 30 years.
Real-World Applications
Ground mounts. Set the panels on ground brackets with open space behind them, so the rear side can collect reflected light.
Flat roofs. Tilt the array on a flat roof, where the back of each panel is exposed to light reflected off the roof surface.
Vertical surfaces and poles. SunGold lists vertical surfaces and poles among the mounts this panel fits.
Snow and wind sites. SunGold says the dual-sided design captures reflected light and helps clear snow, and the panel carries 5400 Pa snow and 2400 Pa wind ratings.
Practical Comparison
SunGold Power 500 Watt Bifacial Panel Versus the 450 Watt Bifacial Panel
SunGold's 450W bifacial panel (SGN-450-BDG5) measures 69.37 x 44.65 inches and weighs 53.35 lbs. This 500W panel is the same width but 77.17 inches long and 60.85 lbs. It adds 50W per module and has a higher open circuit voltage, 39.45V against 35.03V.
SunGold Power 500 Watt Bifacial Panel Versus the 590 Watt Bifacial Panel
The 590W panel (SGN-590-BDG1) is a 144-cell module at 89.69 x 44.65 inches and 69.45 lbs, with a 52.35V open circuit voltage. The 500W panel is about a foot shorter and 8.6 lbs lighter, while the 590W delivers more watts from each module.
Bifacial Panels Versus Monofacial Panels
A monofacial panel makes power from the front only. This bifacial module also converts reflected light that reaches the back glass, so mounts with open space behind the array can gain extra output.
Buyer Guidance
Size and Handling
Each panel is 77.17 x 44.65 x 1.38 inches and weighs 60.85 lbs, so plan your racking for a module of this size and have a second person on hand for lifting. A pack of two ships in a package of about 79 x 46.1 x 3.7 inches.
String Planning
Open circuit voltage is 39.45V per panel, and the Voc temperature coefficient is -0.25%/K, so voltage climbs in cold weather. Check the maximum PV input voltage of your inverter or charge controller and leave headroom when you size strings.
Mounting for Rear-Side Gain
Rear-side gain needs light reaching the back of the panel. A panel mounted flat against a surface, with no light behind it, works like a front-side-only module.
This May Be A Good Fit If
- You are building a ground-mount or flat-roof array
- You want N-type bifacial modules with a 30-year linear power warranty
- You want more watts per panel than a 450W module in a shorter frame than a 590W module
- You install in a snow or wind-prone area
Common Questions
How Much Can the Rear Side Add to Output?
Up to an additional 30%, depending on how much reflected light reaches the back. SunGold cites up to 650W with rear-side gain and notes that actual output depends on installation and conditions.
How Big and Heavy Is the 500W Panel?
It measures 77.17 x 44.65 x 1.38 inches (1960 x 1134 x 35mm) and weighs 60.85 lbs (27.6 kg).
Is the 500W Panel Waterproof?
Yes. SunGold confirms the panel is waterproof, and its junction box is IP68 rated.
What Connectors Does It Use?
MC4-compatible connectors on 12 AWG (4mm²) PV cable, with 1200mm leads.
How Many Panels Come in a Pack?
Choose 2, 4, 6, 8, 10, 12, 14, 16, 18 or 20 panels. Every panel in a pack is the same SGN-500-BDG6 module.
What's Included
- 2, 4, 6, 8, 10, 12, 14, 16, 18 or 20 x SunGold Power 500 Watt Bifacial N-Type Monocrystalline Solar Panel (SGN-500-BDG6), Based on the Pack Size Selected
N-Type Bifacial Power in a Mid-Size Module
The SunGold Power 500 Watt Bifacial N-Type Monocrystalline Solar Panel combines 22.5% efficient N-type cells, rear-side gain and dual glass construction in a 108-cell module. At Outbound Power, we help customers plan string sizes, racking and inverter matches for solar arrays. If you have questions, our team is happy to help.
SunGold Power 500 Watt Bifacial N-Type Monocrystalline Solar Panel Specifications
|
| Electrical Characteristics (STC) |
| Model |
SGN-500-BDG6 |
| Peak Power (Pmax) |
500W |
| Power Tolerance |
0 to +5W |
| Maximum Power Voltage (Vmp) |
33.10V |
| Maximum Power Current (Imp) |
15.11A |
| Open Circuit Voltage (Voc) |
39.45V |
| Short Circuit Current (Isc) |
15.80A |
| Module Efficiency |
22.5% |
| Maximum System Voltage |
1500V |
| Maximum Rated Fuse Current |
30A |
| Bifaciality |
80 ±10% |
| Test Conditions |
1000 W/m², 25°C module temperature, AM1.5 |
| Electrical Characteristics (NMOT) |
| Peak Power (Pmax) |
376.2W |
| Open Circuit Voltage (Voc) |
37.47V |
| Short Circuit Current (Isc) |
12.78A |
| Maximum Power Voltage (Vmp) |
31.09V |
| Maximum Power Current (Imp) |
12.10A |
| Test Conditions |
800 W/m², 20°C, wind 1m/s |
| Temperature Ratings |
| Temperature Coefficient of Pmax |
-0.30%/K |
| Temperature Coefficient of Voc |
-0.25%/K |
| Temperature Coefficient of Isc |
+0.046%/K |
| Nominal Module Operating Temperature |
43°C ±2°C |
| Operating Temperature Range |
-40°F to 185°F (-40°C to 85°C) |
| Structural Characteristics |
| Module Type |
N-type bifacial dual glass |
| Cell Type |
N-type monocrystalline (182 x 210mm) |
| Number of Cells |
108 (2 x 54) |
| Dimensions |
77.17 x 44.65 x 1.38 in (1960 x 1134 x 35mm) |
| Weight |
60.85 lbs (27.6 kg) |
| Front Glass |
2.0mm tempered, anti-reflection coating |
| Back Glass |
Black |
| Frame |
Anodized aluminum alloy |
| Junction Box |
IP68 rated (3 diodes) |
| Output Wire |
12 AWG (4mm²) PV cable |
| Wire Length (Including Connector) |
47.24 in (1200mm) |
| Connector |
MC4 compatible |
| Mechanical Loading |
| Front Side Maximum Static Load |
5400Pa |
| Rear Side Maximum Static Load |
2400Pa |
| Hailstone Test |
35mm |
| Safety and Certification |
| Module Fire Performance |
Type 29 according to ANSI/UL 61730 |
| Safety Class |
Class II |
| Certification |
UL 61730 certified by ETL |
| Manufacturer Systems |
ISO 9001, ISO 14001, ISO 45001 |
| Warranty |
| Material and Workmanship Warranty |
12 years |
| Linear Power Warranty |
30 years |
| Annual Degradation |
0.40% over 30 years |
| Packaging |
| Package Dimensions (2 Panels) |
79 x 46.1 x 3.7 in |
| Pack Options |
2, 4, 6, 8, 10, 12, 14, 16, 18 or 20 panels |
SunGold Power SGN-500-BDG6 Data Sheet
SunGold Power SGN-500-BDG6 UL 61730 Certificate