SunGold Power 590 Watt Bifacial N-Type Monocrystalline Solar Panel
We Beat Any Price
Found the same price or less? Just ask & we'll beat it.
Found the same price or less? Just ask & we'll beat it.
The SunGold Power 590 Watt Bifacial N-Type Monocrystalline Solar Panel (SGN-590-BDG1) captures sunlight on both its front and rear surfaces. Light reflected from the ground, snow, gravel, or a light-colored roof reaches the back of the panel and adds to its output, and SunGold says bifacial modules can generate up to 30 percent more energy than conventional panels when the rear side is exposed to reflected light.
It uses 144 cells of N-type monocrystalline silicon and is rated at 590 watts on the front side, with UL61730 certification through ETL. SunGold designs it for flat roofs, ground mounts, vertical surfaces, and pole mounts, and backs it with a 12 year material and workmanship warranty and a 30 year linear power warranty. Choose a 2 to 20 panel pack using the options on this page.



The transparent rear side collects reflected and diffuse light, so a ground mount over light-colored gravel, a snowy field, or a white roof can produce more energy than a single-sided panel of the same front rating. Actual rear-side gain depends on mounting height and surface reflectivity.
SunGold notes the dual-sided design captures reflected light and helps shed snow, and its N-type cells improve output and reliability under partial shading.
At standard test conditions, each panel produces 590 watts at 44.40V and 13.29A, with an open circuit voltage of 52.35V and short circuit current of 13.90A.
SunGold rates the panel for 2400Pa of wind load and an operating range of -40°F to 185°F, and confirms it is waterproof.
A 1500V maximum system voltage gives flexibility for long series strings on high voltage MPPT inverters, and 12 AWG output cables (1 ft per cable) connect to standard solar extension cables.
Off-grid homes and cabins. Build an array sized to your battery bank and all-in-one inverter.
Grid-tied and hybrid systems. Reduce power bills by pairing the panels with a hybrid inverter and battery storage.
Ground and pole mounts. Install in open areas where panels can be angled for the best production and the rear side can collect reflected light.
Farms, shops, and outbuildings. Power pumps, lighting, and equipment far from the grid.
Versus monofacial panels. Single-sided panels only collect light from the front. Bifacial panels add rear-side production, which is most valuable on ground mounts and reflective surfaces.
Versus higher wattage panels. Larger panels mean fewer modules and connections, but they are heavier and harder to handle on a roof. Choose the size that fits your mounting space and installation crew.
Versus full pallets. For large arrays, SunGold also offers full pallets, which can be more efficient for big installations.
This may be a good fit if
Yes. SunGold confirms the panel is waterproof.
It depends on your inverter or charge controller's PV voltage range, your system voltage, and any shading. Check your inverter's MPPT range before arranging the array.
12 years material and workmanship; 30 year linear power warranty.
The SunGold Power 590 Watt Bifacial N-Type Monocrystalline Solar Panel gives you 590 watts per panel with UL61730 certification and SunGold's long-term warranty. At Outbound Power, we help customers design solar arrays that match their inverter, batteries, and mounting space. If you have questions about string sizing or system design, our team is happy to help.
SunGold Power 590 Watt Bifacial Solar Panel Specifications |
|
|---|---|
| Model | SGN-590-BDG1 |
| Peak Power (Pmax) | 590W |
| Max Power Current (Imp) | 13.29A |
| Max Power Voltage (Vmp) | 44.40V |
| Short Circuit Current (Isc) | 13.90A |
| Open Circuit Voltage (Voc) | 52.35V |
| Cells | 144 cells, N-type monocrystalline M10 |
| Production Tolerance | ±3% |
| Maximum System Voltage | 1500V |
| Wind Load | 2400Pa |
| Output Cables | 12 AWG (1 ft per cable) |
| Operating Temperature | -40°F to 185°F (-40°C to 85°C) |
| Safety Class | Class II |
| Certifications | UL61730 (ETL), ISO 9001, ISO 14001, ISO 45001 |
| Panel Weight | 69.45 lb |
| Panel Dimensions | 89.69 x 44.65 x 1.38 in |
| Package | 140 lb, 89.69 x 47.65 x 3.1 in (2 panels) |
| Module Fire Performance | Type 29 (ANSI/UL 61730) |
| Warranty | 12 years material and workmanship; 30 year linear power warranty |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
placeholder