SunGold Power 6000W DC 48V Split Phase Pure Sine Wave Inverter With Charger
We Beat Any Price
Found the same price or less? Just ask & we'll beat it.
Found the same price or less? Just ask & we'll beat it.
The SunGold Power 6000W DC 48V Split Phase Pure Sine Wave Inverter With Charger converts 48 volt battery power into 120 and 240 volt split phase pure sine wave AC. It combines a 6000 watt low frequency inverter, a 60 amp battery charger, and an 80 amp automatic transfer switch, and SunGold lists this 48V model as built to the UL1741 standard.
Running at 48 volts keeps DC current low for a 6000 watt system, which makes cabling simpler and more efficient. It is well suited to off-grid homes, cabins, shops, and backup systems that feed a 120/240V panel from a 48V battery bank.
Two 120V legs supply standard household circuits, with 240V available across them for well pumps, dryers, and other 240V equipment. Output frequency can be set to 50 or 60Hz with SW4.
The low frequency transformer delivers three times its rated output for up to 20 seconds, helping start motor loads that would overwhelm a lighter inverter.
The built-in 3-step charger delivers up to 60 amps (±5A) at 48V from 240VAC input, with 9 battery type settings and an adjustable 0 to 100 percent charge current. SunGold rates the built-in transfer switch at 80 amps, and typical transfer time is 10ms.
AC priority is the default, and SW5 switches to battery priority for solar-charged systems. The inverter can start a compatible generator when the batteries are low and stop it once charging is finished. AC input range is selectable at 140 to 270VAC or 184 to 253VAC with SW2.
SunGold includes a remote control and battery temperature sensor cable. Idle consumption is 81 watts, or 30 watts in power saver mode.
Off-grid homes. Power a 120/240V panel from a 48V lithium bank, including a well pump and kitchen appliances.
Cabins and shops. Run 240V tools and 120V circuits from one inverter.
Backup power. Keep critical circuits running with automatic transfer and generator start.
Solar systems with a separate controller. Pair it with an external MPPT charge controller and use battery priority.
Versus the 6000W 24V split phase model. The 24V version has a larger 90 amp charger but draws twice the DC current. The 48V model reduces cable size and carries UL1741 listing.
Versus all-in-one solar inverters. SunGold confirms this unit needs an external solar controller for solar panels.
Versus parallel-capable inverters. SunGold states that these inverters cannot be connected in parallel, so choose a model sized for your full load.
This may be a good fit if
No. SunGold describes it as an off-grid pure sine wave inverter charger.
No. SunGold states these inverters cannot be connected in parallel.
No. You need an external solar charge controller.
Only when wired in series to create a 48V bank, if your batteries support series connection. SunGold recommends using one battery size and model in a system.
The SunGold Power 6000W DC 48V Split Phase Pure Sine Wave Inverter With Charger gives a 48 volt system 120/240V output, an 18000 watt surge, a 60 amp charger, and an 80 amp transfer switch in one UL1741 unit. At Outbound Power, we help customers design off-grid and backup systems around their loads and batteries. If you have questions about your setup, our team is happy to help.
SunGold Power 6000W DC 48V Specifications |
|
|---|---|
| Model | LFP6K48V240VSPL |
| Certification | UL1741 |
| Continuous Output Power | 6000W |
| Surge Rating | 18000W (20 seconds) |
| Output Waveform | Pure sine wave |
| AC Output Voltage | 120VAC and 240VAC split phase |
| AC Input Voltage | 240VAC |
| Output Frequency | 50Hz or 60Hz (selectable via SW4) |
| Typical Transfer Time | 10ms (max) |
| Transfer Switch Rating | 80A |
| Nominal Efficiency | >88% |
| Nominal Input Voltage | 48.0VDC |
| Minimum Start Voltage | 40.0VDC |
| Low Battery Alarm | 38.0VDC to 40.0VDC |
| Low Battery Trip | 36.0VDC to 38.0VDC (selectable via SW1) |
| High Voltage Alarm | 64.0VDC |
| Low Battery Voltage Restart | 52VDC |
| Idle Consumption | 81W |
| Power Saver Mode Idle Consumption | 30W |
| Charger Rate | 60A ±5A |
| AC Input Range | 140V to 270VAC or 184V to 253VAC (selectable via SW2) |
| Overcharge Protection Shutdown | 62.8V |
| Charge Settings | 9 battery type settings, 3-step charging |
| Adjustable Charge Current | Off, 0% to 100% |
| Unit Dimensions | 25.6 x 9.1 x 7.5 in |
| Unit Weight | 76.7 lb |
| Shipping Dimensions | 30.3 x 13.4 x 12.8 in |
| Shipping Weight | 85.5 lb |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
placeholder