The SunGold Power LCD Remote Control for LFP/LFPV Series Inverters Puts Your Inverter's Power Switch and Status Screen Where You Can Reach Them
The SunGold Power LCD Remote Control for LFP/LFPV Series Inverters is a wired remote panel for SunGold's LFP and LFPV series inverter chargers. Its faceplate has a three-position switch (Power Saver Auto, Unit Off and Power Saver Off) and a display window.
It is for owners whose inverter is mounted out of easy reach and who want the power switch and status readings in a more convenient spot. SunGold's inverter manuals list remote control as an optional accessory for these series.
SunGold Power LCD Remote Control for LFP/LFPV Series Inverters Features
Made for the LFP and LFPV Series
The faceplate is labeled "LFP/LFPV Series Remote Control". Using SunGold's own panel avoids guessing at wiring and switch functions.
Three-Position Power Switch
The rocker switch has the same three positions as the inverter's own switch: Power Saver Auto, Unit Off and Power Saver Off. You can turn the inverter on, put it in power saver mode or switch it off from the remote.
LCD Status Readings
SunGold's LFP manual lists what the remote's LCD shows: shore or generator voltage, DC voltage on the inverter, load percentage when inverting, AC output voltage, output frequency, bypass or inverter mode and a battery state of charge graph. It also flags low or high voltage, over-temperature, overload and fault conditions.
Works Alongside the Inverter's Own Switch
SunGold's LFPV manual explains that the remote panel and the panel on the inverter case operate in parallel. Whichever panel first switches from off to a power saver position powers the inverter on, and the inverter powers off only when both panels are set to Unit Off.
Cable Runs Up to 10 Meters
The remote connects to the inverter's remote control port with a telephone-style cable. SunGold's LFPV manual gives a maximum cable length of 10 meters, which is about 33 feet.
Real-World Applications
Inverters in tight spaces. Control an inverter mounted in a utility room, cabinet or equipment bay without going to the unit.
Off-grid cabins. Check battery state of charge, load and input voltage from the living area.
Replacement panel. Replace a lost or damaged remote on an LFP or LFPV series inverter.
Practical Comparison
SunGold Power LCD Remote Control Versus the Inverter's Built-In Switch
The inverter's own switch is on the unit. The remote gives you the same three switch positions at the end of a cable, and adds an LCD with voltage, load and battery readings.
SunGold Power LCD Remote Control Versus a Wi-Fi Module
SunGold's Wi-Fi modules are made for other products, such as its 3000W and 5000W solar inverters. This remote is a wired panel for the LFP and LFPV series, with no network or app needed.
Buyer Guidance
Check Your Inverter
This remote is for SunGold LFP and LFPV series inverters. SunGold does not publish a model-by-model list, so check that your inverter has a remote control port, or ask our team before you order.
Cable and Installation
SunGold's product photo shows the remote with a flat cable, but SunGold does not publish a box list or the cable's length, so ask our team to confirm. Never cut the cable while it is attached to the inverter with a battery connected, even if the inverter is turned off. SunGold warns that a short circuit during cutting will damage the remote's circuit board.
This May Be A Good Fit If
- You own a SunGold LFP or LFPV series inverter
- Your inverter is mounted where the switch is hard to reach
- You want voltage, load and battery readings at a glance
Common Questions
Which Inverters Does This Remote Work With?
SunGold makes it for its LFP and LFPV series inverters. The series name is printed on the remote's faceplate.
How Does It Connect to the Inverter?
It plugs into the inverter's remote control port with a telephone-style cable. SunGold's LFPV manual describes this as an RJ11 port on the DC side of the inverter.
Can I Still Use the Switch on the Inverter?
Yes. The two panels work in parallel. If their commands conflict, the inverter follows this priority: power saver on, then power saver off, then power off.
What Does the Screen Show?
Input voltage, DC voltage, AC output voltage and frequency, load percentage, operating mode, a battery state of charge graph and warning conditions.
What's Included
- 1 x SunGold Power LCD Remote Control for LFP/LFPV Series Inverters
Control Your SunGold Inverter From Where You Are
The SunGold Power LCD Remote Control for LFP/LFPV Series Inverters brings the power switch and status screen of your LFP or LFPV inverter to a spot that is easy to reach. At Outbound Power, we help customers match accessories to their SunGold inverters. If you have questions, our team is happy to help.
SunGold Power LCD Remote Control for LFP/LFPV Series Inverters Specifications
|
| Brand |
SunGold Power |
| SunGold Part |
LCDremote |
| Product Type |
Wired LCD remote control panel |
| Compatible Inverters |
SunGold LFP and LFPV series |
| Switch Positions |
Power Saver Auto, Unit Off, Power Saver Off |
| Connection |
Inverter remote control port |
| Cable Type |
Telephone-style cable |
| Maximum Cable Length |
10 meters (about 33 ft) |
| Voltage Readings |
Shore/generator, DC and AC output |
| Other Readings |
Load %, frequency, mode, battery graph |
| Alerts |
Low/high voltage, overtemp, overload, fault |
SunGold Power LFP and LFPV Series Inverter Manuals
The LFP and LFPV series manuals below cover the inverter's remote control port and what the remote's LCD shows.
SunGold Power LFP Series Inverter Manual
SunGold Power LFPV Series Inverter Manual