The SunGold Power 11.4kW Hybrid Solar Kit with 30.72kWh LiFePO4 Battery Fills All Three MPPT Inputs With a 12600W Bifacial Array
The SunGold Power 11.4kW Hybrid Solar Kit with 30.72kWh LiFePO4 Battery is SunGold's SGH-11N3E system. One 11.4kW 48V split phase hybrid inverter works with six 5.12kWh LiFePO4 batteries in an enclosed cabinet. The full kit adds twenty-eight 450W bifacial N-type panels for 12,600W of solar, along with three sets of PV cables and three PV breakers. A version without panels is available for buyers with their own array.
This is a grid-interactive kit rather than an off-grid one. SunGold says it supports off-grid, hybrid or grid-tied setups, letting you power appliances with solar, feed excess power back to the grid, and store energy to offset bills or provide backup during outages. Six batteries make it a good choice for households with heavier evening use or frequent outages.
SunGold Power 11.4kW Hybrid Solar Kit with 30.72kWh LiFePO4 Battery Features
Three Strings on Three MPPT Inputs
SunGold's wiring diagram splits the array into one string of ten panels and two strings of nine, one string per MPPT input, each with its own 25A PV breaker. The inverter accepts up to 15,000W of PV at up to 600V, with MPPT input currents of 30A, 22A and 22A.
30.72kWh in One Battery Cabinet
Six SG48100P batteries, each 51.2V 100Ah and 5.12kWh, fit in the included enclosed cabinet. Each module is rated for at least 7000 cycles and a 15-year design life, and SunGold lists UL1973, UL9540A, CE and UN38.3. The inverter talks to the battery BMS over CAN.
Connected to the Grid and Your Main Panel
The utility feeds the inverter's Grid terminal, and the Load output supplies your main panel with up to 200A of grid pass-through. SunGold lists UL 1741, CSA C22.2, UL 1699B, UL 1741SB, IEEE 1547:2018, HECO SRD 2.0 and CEC Listed for the inverter.
You Choose How Solar Is Used
Self-consumption mode, the default, powers loads first, then charges the battery, then exports any surplus. Feed-in priority exports before charging, and back-up mode charges the battery first. Up to three time periods can be set for forced charging or discharging.
Battery Backup When the Grid Fails
On grid loss, the inverter moves to off-grid mode automatically, normally in less than 10ms. It then runs from battery and solar at up to 11,400W of split phase output, so the 200A pass-through rating applies only while the grid is present.
Generator Port and AC Coupling
A dedicated GEN port handles up to 100A or 24,000W from a split phase or 2/3 phase generator. SunGold also lists AC coupling, and the manual's diagrams show an on-grid inverter connected at the GEN port.
Real-World Applications
Homes with heavy evening use. Store daytime solar in 30.72kWh of batteries and draw on it after sunset.
Outage-prone areas. Six batteries give more stored energy to carry essential loads through a long outage.
Time-based rates. Schedule forced charge and discharge periods to match your utility's rate periods.
Existing grid-tie systems. Use the version without panels and the AC coupling function to add storage alongside an on-grid inverter.
How It Compares to Common Alternatives
Versus an off-grid kit. An off-grid kit is not tied to the utility. This hybrid kit stays connected, can export solar and still provides automatic battery backup.
Versus solar without storage. The 30.72kWh bank stores surplus solar for the evening and supplies backup power during an outage.
Versus the version without panels. Both include the inverter, six batteries, cabinet, cables and DC breaker. The full kit adds the 28 panels, three PV cable sets and three PV breakers.
Is This Hybrid Solar Kit the Right Fit
-
Grid connection rules. SunGold's manual requires qualified installers and compliance with local electrical standards and local power authority requirements.
-
Surge loads in an outage. SunGold advises against running very high surge loads, such as air conditioners and high-power pumps, in off-grid mode.
-
Inverter location. The enclosure is NEMA 3R, but SunGold recommends a sheltered spot out of direct sun, rain and snow. The batteries are IP20 battery boxes.
-
Roof or ground space. Twenty-eight panels each measure 69.37 x 44.65 x 1.38 inches.
This may be a good fit if
- You are on the grid and want battery backup
- You use a lot of power after sunset
- You have room for a 12,600W array
- You want all three MPPT inputs in use
Common Questions
How Is the Solar Array Wired?
SunGold's diagram uses three strings, one of ten panels and two of nine, so each of the inverter's three MPPT inputs has its own string and 25A breaker.
Will the System Run During a Blackout?
Yes. It switches to off-grid mode automatically, normally in under 10ms, and powers loads from the batteries and solar. A battery must be connected in this mode.
Can I Export Solar to the Grid?
Yes. Self-consumption and feed-in priority modes send surplus solar to the grid. Confirm your local power authority's requirements first.
Can I Use My Own Solar Panels?
Yes, with the version without panels. Keep each MPPT input at or below 600V, and SunGold notes that PV modules should have an IEC61730 class A rating.
What's Included
With 28 × 450W Panels
- 1 x 11.4KW 48V Split Phase Hybrid Solar Inverter
- 28 x 450W Bifacial N-Type Monocrystalline Solar Panels
- 6 x 100Ah 51.2V LiFePO4 Batteries
- 1 x Enclosed Battery Cabinet
- 3 Sets x 50 Feet Solar Extension Cables, Inverter PV Input
- 2 Sets x 2/0 AWG Cables, Breaker to Battery or Inverter Connection
- 3 x 25A PV Breakers
- 1 x 300A DC Breaker
Without Solar Panels
- 1 x 11.4KW 48V Split Phase Hybrid Solar Inverter
- 6 x 100Ah 51.2V LiFePO4 Batteries
- 1 x Enclosed Battery Cabinet
- 2 Sets x 2/0 AWG Cables, Breaker to Battery or Inverter Connection
- 1 x 300A DC Breaker
More Storage for Grid-Connected Homes
The SunGold Power 11.4kW Hybrid Solar Kit with 30.72kWh LiFePO4 Battery pairs an 11.4kW hybrid inverter with six batteries and, in the full kit, a 12,600W bifacial array wired across all three MPPT inputs. At Outbound Power, we help customers plan hybrid systems around their loads and utility. If you have questions, our team is happy to help.
SunGold Power 11.4kW Hybrid Solar Kit with 30.72kWh LiFePO4 Battery (SGH-11N3E / SGH-11N3E-s) Specifications
|
| Kit Summary |
| Kit Models |
SGH-11N3E (with 28 x 450W panels); SGH-11N3E-s (without solar panels) |
| Inverter |
1 x SGN-11K15PRO 11.4kW 48V split phase hybrid inverter |
| Battery Bank |
6 x SG48100P 51.2V 100Ah LiFePO4 in an enclosed cabinet, 30.72kWh total |
| Solar Array |
SGH-11N3E: 28 x 450W bifacial N-type panels (SGN-450-BDG5), 12,600W total; SGH-11N3E-s: none |
| String Layout |
SGH-11N3E: 3 strings (10, 9 and 9 panels in series), one per MPPT input |
| System Type |
Grid-interactive hybrid; also supports off-grid or grid-tied configurations |
| Certificates |
Inverter: UL 1741/CSA C22.2/UL 1699B/UL 1741SB/IEEE 1547:2018/HECO SRD 2.0/CEC Listed; Batteries: UL1973/UL9540A/CE/UN38.3; Solar panels: UL61730/CE/TUV |
| Hybrid Inverter (Each, SGN-11K15PRO) |
| Nominal AC Output Power |
11,400W |
| Max. AC Output Current |
47.5A |
| Max. Grid Pass-Through Current |
200A |
| Nominal Grid and Output Voltage |
120/240V split phase; 120/208V (2/3 phase) |
| Nominal Frequency |
50Hz / 60Hz |
| Peak Output Apparent Power |
150%, 10 s |
| Transfer Time |
<10ms (typical) |
| Working Modes |
Self-consumption (default), feed-in priority, back-up, off-grid; forced charge/discharge in three time periods |
| Max. PV Input Power |
15,000W |
| Max. PV Voltage |
600V |
| Start-Up Voltage |
90V |
| MPPT Operating Voltage Range |
70V to 540V |
| MPPT Inputs |
3 (max. input current 30A / 22A / 22A) |
| Battery Type |
Lithium-ion / lead-acid |
| Battery Voltage Range |
40V to 64V |
| Max. Charge / Discharge Current |
210A / 210A |
| Max. Charge / Discharge Power |
10,000W / 10,000W |
| GEN Port |
Max. 100A / 24,000W; split phase or 2/3 phase generators |
| Integrated Breakers |
Battery 300A; load 2 x 200A |
| CEC Efficiency |
96.50% |
| Protection |
Anti-islanding, AFCI/RSD monitoring, DC switch, surge arrester |
| Enclosure |
IP65 / NEMA 3R, indoor or outdoor mounting |
| Operating Temperature |
-13°F to 140°F, derating above 113°F (-25°C to 60°C, derating above 45°C) |
| Dimensions (W x H x D) |
17.6 x 35.5 x 10.6 in (448 x 901 x 270 mm) |
| Weight |
103.6 lbs (47 kg) |
| Display |
LED + LCD touchscreen |
| Communication |
CAN (BMS), RS485 (meter), RS485, CAN (parallel); Wi-Fi / LAN optional; Bluetooth app setup |
| Parallel Capacity |
Up to 9 units |
| Battery (Each, SG48100P) |
| Chemistry |
Lithium iron phosphate |
| Nominal Voltage |
51.2V |
| Rated Capacity |
100Ah |
| Nominal Energy |
5.12kWh |
| Recommended Charging Voltage |
54.5V |
| Charging Limited Voltage |
57.6V |
| Discharge Cut-Off Voltage |
43.2V |
| Standard Charge / Discharge Current |
50A / 50A |
| Max. Continuous Charge / Discharge Current |
100A / 100A |
| Cycle Life |
≥7000 (80% DOD) |
| Design Life |
15 years |
| Max. Batteries in Parallel |
63 |
| Communication |
RS232 / RS485 / CAN |
| Display |
LCD |
| Dimensions (L x W x H) |
442 x 460 x 133 mm (3U) |
| Weight |
Around 43kg |
| Protection Class |
IP20 battery box |
| Working Temperature |
Charging 0~45°C; discharging -20~60°C |
| Warranty |
10 years |
| Solar Panel (Each, SGN-450-BDG5, Kit With Panels) |
| Peak Power (Pmax) |
450W |
| Module Efficiency |
22.5% |
| Cell Type |
N-type monocrystalline, bifacial dual glass, 96 cells |
| Bifaciality |
80±10% |
| Maximum Power Voltage (Vmp) |
30.08V |
| Maximum Power Current (Imp) |
14.97A |
| Open Circuit Voltage (Voc) |
35.03V |
| Short Circuit Current (Isc) |
16.05A |
| Maximum System Voltage |
1500V |
| Mechanical Load |
5400 Pa front (snow), 2400 Pa rear (wind) |
| Junction Box |
IP68 |
| Dimensions |
69.37 x 44.65 x 1.38 in (1762 x 1134 x 35 mm) |
| Weight |
53.35 lbs (24.2 kg) |
| Operating Temperature |
-40°F to 185°F (-40°C to 85°C) |
| Certifications |
UL61730 certified by ETL, CEC Listed |
| Warranty |
12 years material and workmanship; 30 years linear power |
SunGold Power SGH-11N3E Solar Kit Manuals
SunGold Power SGH-11N3E Solar Kit Inverter Manual
SunGold Power SGH-11N3E Solar Kit Battery Manual
SunGold Power SGH-11N3E Solar Kit Panel Data Sheet
SunGold Power SGH-11N3E Solar Kit Wiring Diagram
Installation note: This high-voltage electrical system should be designed, permitted, and installed by qualified professionals. Verify local electrical codes, utility interconnection requirements, system sizing, and component compatibility before installation.