The Victron Ekrano GX Wall Mount Lets You Install an Ekrano GX on a Solid Wall With Only Four Screws
The Victron Ekrano GX Wall Mount is an enclosure accessory for the Ekrano GX, Victron's GX device with a built-in display. It holds the Ekrano on a wall, so you do not have to cut a panel opening to use it.
Victron says only four screws are needed, with no additional drilling or cut-outs required. If your Ekrano GX will live on a wall in a shed, workshop, utility room, or boat locker, this is the Victron-made way to mount it.
Victron Ekrano GX Wall Mount Features
Four-Screw Installation On A Solid Wall
Victron describes the wall mount as quick and secure on a solid wall. You mark the holes, drive four screws, and the enclosure is up. Victron publishes a drill pattern PDF for the Ekrano wall box so you can mark the holes before you drill.
Opens From The Top For Service Access
The enclosure opens from the top with two screws and folds forward without being removed from the wall. That means you can add or change cables later without taking the whole unit down.
Cable Access From Several Sides
Victron says you can connect additional cables to the Ekrano GX interfaces from the sides, top, bottom, or back. This helps when your wiring comes from different directions, such as a battery bank below and a network cable from above.
Sized For The Ekrano GX
Victron's wall-mounted display enclosures datasheet lists this enclosure at 128 x 187 x 80 mm (h x w x d), which is about 5.0 x 7.4 x 3.1 inches. The datasheet shows it as the enclosure for the Ekrano GX, which measures 124 x 187 x 29.8 mm.
Real-World Applications
-
Workshop and shed power rooms. Put the Ekrano GX at eye level on a plain wall.
-
Home backup systems. Mount the display near the inverter and battery equipment.
-
Boat and RV compartments with a solid wall. Install without cutting a hole in a panel.
-
Off-grid cabins. Give the Ekrano GX a visible spot by the door or the electrical panel.
How It Compares To Other Ways To Mount An Ekrano GX
The Ekrano GX can also be installed in a panel, and Victron's Ekrano page rates the front as IP54 when installed with the steel bracket. That approach needs a panel cut-out. The wall mount is the option for when there is no panel to cut. It adds depth, since the enclosure is 80 mm deep, so it is not the right choice where you need the screen to sit nearly flush with a surface.
Victron's datasheet also lists other wall-mounted enclosures for the BMV-700, BMV-702, MPPT Control, Battery Alarm GX, Skylla-i Control GX, and Digital Multi Control GX. Those are for different products. Only this part number, BPP900495100, is listed for the Ekrano GX.
Is This Wall Mount The Right Fit
Before you order, check these points:
- Make sure you have, or plan to buy, an Ekrano GX. This mount is not for the Cerbo GX or the GX Touch displays.
- Confirm that your wall is solid enough to hold four screws, and choose screws and anchors to suit the wall.
- Leave room in front for the enclosure to fold forward, and 80 mm of depth.
Victron does not state whether screws or anchors are included, so please plan to supply your own.
This May Be A Good Fit If
- You own an Ekrano GX
- You want to mount it on a wall without a panel cut-out
- You want service access without removing the unit
- You need cable entry from different sides
Common Questions
Which Product Is The Ekrano GX Wall Mount For?
It is for the Ekrano GX. Victron's wall-mounted display enclosures datasheet lists BPP900495100 as suitable for the Ekrano GX only.
How Many Screws Does Installation Need?
Victron says four screws mount the enclosure to the wall. Two more screws open the enclosure from the top.
Do I Have To Remove It From The Wall To Wire It?
No. Victron says the enclosure opens from the top and folds forward while it stays on the wall.
Is The Ekrano GX Included?
No. This listing is for the wall mount accessory only. Victron sells the Ekrano GX as a separate product (BPP900480100).
What's Included
- 1 x Victron Ekrano GX Wall Mount (BPP900495100)
Mount Your Ekrano GX The Easy Way
A good mount makes the rest of the install easier. At Outbound Power, we focus on real-world backup power, RV, marine, and off-grid systems. If you are planning an Ekrano GX install and want help with the parts around it, the Outbound Power team is happy to help.
Victron Ekrano GX Wall Mount Specifications
|
| Product |
| Model |
BPP900495100 |
| Name |
Ekrano GX Wall Mount |
| Suitable for |
Ekrano GX |
| Mechanical |
| Dimensions (h x w x d) |
128 x 187 x 80 mm (5.0 x 7.4 x 3.1 in) |
| Mounting |
Solid wall, four screws, no additional drilling or cut-outs |
| Enclosure access |
Opens from the top with two screws and folds forward without being removed from the wall |
Victron Ekrano GX Wall Mount Data Sheet
Victron Ekrano GX Wall Mount Assembly Drawing
Victron Ekrano GX Wall Mount Drill Pattern