The Victron Energy 12-Volt MagCode Power Port (Max 15 Amp) Gives Your Blue Smart IP65 Charger a Dedicated Power Connection Point
The Victron Energy 12-Volt MagCode Power Port (max 15 amp) is an accessory built for the Victron Energy Blue Smart Charger 12-Volt IP65 range. If you already run one of these chargers in an RV, boat, work van, or off-grid battery bank, this port is a Victron-listed add-on for the 12-volt side of that setup, rated for a maximum of 15 amps. It is for owners who want their charging setup to stay tidy, matched to the charger family, and clear about its limits.
It is a small part, and small parts are where good power systems either shine or sulk. Choosing a Victron accessory made for your charger range means fewer guessing games, and your future self will thank you the next time you are standing in a dim equipment bay with a flashlight in your teeth.
Victron Energy 12-Volt MagCode Power Port (Max 15 Amp) Features
12-Volt Design For Pairing With Your Blue Smart IP65 Charger
This power port is listed as an accessory for the Victron Blue Smart Charger 12-Volt IP65 range. That tells you where it belongs: on the 12-volt side of a Blue Smart IP65 charger setup. Matching the accessory to the charger family is the first step in a clean installation.
- Designed for 12-volt systems
- Listed as an accessory for the Blue Smart Charger 12-Volt IP65 range
- Part number BPC900520014
15 Amp Maximum Rating For Planning Your Load
The maximum current is right in the product name: 15 amps. That figure gives you a clear ceiling when you size your wiring, fusing, and charger. Always treat 15 amps as the upper limit and plan your system with some headroom rather than running right at the edge.
Compact Dimensions For Fitting Into Tight Spaces
The listed dimensions are 1.38 x 6.3 x 3.94 inches, and the listed weight is 1 pound. Those numbers help you judge whether it will fit in a battery compartment, equipment locker, or van build before you order. Measure your mounting location first, because a part that does not fit is just an expensive paperweight.
Victron Branding For Easier System Planning
Victron is a well-known name in 12-volt charging, monitoring, and power conversion. Keeping your charger and its accessories within the same brand family makes it easier to research compatibility, find documentation, and talk through your setup with a knowledgeable supplier.
Real-World Applications
This accessory belongs wherever a 12-volt Blue Smart IP65 charger does. Because the product facts are limited to the charger range, the examples below are general guides to where that charger family is commonly used. Confirm your own setup before ordering.
-
RV and camper power: Keep a house battery bank charged and organized for weekends on the road or full-time travel.
-
Marine and boat use: A 12-volt charging setup is a common fit for boat batteries, and the IP65 charger range is built with moisture-prone environments in mind.
-
Off-grid cabins and workshops: Small 12-volt battery banks often need a dependable, well-planned charging connection.
-
Mobile worksites: Service vans and trailers running 12-volt equipment benefit from a tidy, repeatable charging connection.
-
Backup power projects: A 12-volt battery that stands ready for emergencies stays ready only if it is kept charged properly.
How This Power Port Compares To Typical Alternatives
Many 12-volt systems are built from a mix of generic connectors, ports, and terminals. Generic parts can work well, but you carry the full burden of checking ratings, fit, and compatibility yourself. This accessory is listed specifically for the Victron Blue Smart 12-Volt IP65 range and carries a clearly stated 15 amp maximum, which takes some of the guesswork out of the equation.
It is not a charger, a battery, or a power station. It does not produce or store power on its own, and it will not replace a larger system. Think of it as a supporting component, the kind that does not get the spotlight but keeps the rest of the show running smoothly.
Is This Power Port Right For You
This is a targeted accessory for a specific charger family, so the best way to decide is to check your own setup. Start with your charger model, then confirm your system voltage and expected current.
This may be a good fit if:
- You own or plan to buy a Victron Blue Smart Charger from the 12-Volt IP65 range
- Your system runs at 12 volts
- Your charging current will stay within the 15 amp maximum
- You prefer to keep your accessories within the Victron family
- You have measured your installation space against the listed dimensions
Before you buy, confirm your exact charger model, the connection method you need, any required cable length, and your mounting location. Those details are not part of the product facts we have, so check them against Victron documentation or ask our team. If your system runs at a voltage other than 12 volts, or your current needs exceed 15 amps, this is not the right port for the job.
Common Questions
What is the Victron Energy 12-Volt MagCode Power Port used for?
It is an accessory for the Victron Energy Blue Smart Charger 12-Volt IP65 range, rated for 12 volts and a maximum of 15 amps.
What is the maximum current rating?
The maximum is 15 amps. Keep your total current within that limit and leave headroom in your system design.
What is the part number?
The part number is BPC900520014.
How big is it?
The listed dimensions are 1.38 x 6.3 x 3.94 inches, with a listed weight of 1 pound.
Will it work with my charger?
It is listed for the Blue Smart Charger 12-Volt IP65 range. If you are not sure whether your charger belongs to that range, contact us before ordering and we will help you confirm.
What's Included
- 1 x Victron Energy 12-Volt MagCode Power Port (Max 15 Amp)
Please confirm with our team if you need details on any additional hardware or accessories.
Build A Reliable 12-Volt Charging Setup With Outbound Power
Good power systems are built from dependable details, and the Victron Energy 12-Volt MagCode Power Port (max 15 amp) is exactly that kind of detail. It keeps your Blue Smart IP65 charger setup matched, planned, and ready for the long haul, whether you are charging a house battery in an RV, a boat battery at the dock, or a work van bank on a job site. At Outbound Power, we help customers choose the right components for real-world backup power, RV power, and off-grid systems. If you are unsure about compatibility, bring us your charger model and your plans, and we will help you build a setup you can trust for years to come.