The Victron VE.Direct Cable 1.8 m Gives You Room to Route Between Nearby Devices
The Victron VE.Direct Cable 1.8 m (about 5.9 ft) connects a VE.Direct device, such as a SmartSolar MPPT or a BMV battery monitor, to a GX device. It has straight connectors and a little more reach than the 0.9 m version.
This is a practical length for many small systems. It lets you mount a charge controller and a GX device a short distance apart and still route the cable cleanly.
Victron VE.Direct Cable 1.8 m Features
1.8 M Of Reach For Everyday Layouts
At 1.8 m, the cable can cross a cabinet door opening or run from one bay to the next. You get enough slack to avoid pulling on the connectors, and you can leave a small service loop in case you need to unplug a device later.
Straight Connectors For Open Mounting
Victron makes VE.Direct cables in a straight model and a 90 degree angle model. This is the straight model, which suits ports that face open space and have room for the cable to run directly away.
VE.Direct Connection For Victron Monitoring And Solar Gear
Victron's Cerbo GX manual says devices with a VE.Direct port, including BMV battery monitors, MPPT solar chargers, Orion XS chargers, and Smart IP43 chargers, can connect directly to a GX device. Victron's cable page also lists VE.Direct inverters and the Peak Power Pack among related products.
Direct GX Device Connection Without Extra Adapters
Victron's manual says VE.Direct devices can be connected directly to a GX device through a VE.Direct port. A Cerbo GX has three VE.Direct ports. If you run out of ports, Victron suggests a VE.Direct to USB interface.
Real-World Applications
-
Neighboring compartments. Run data from a charge controller in one RV bay to a GX device in the next.
-
Wall-mounted systems. Connect a battery monitor on one side of a panel to a GX device on the other.
-
Marine electrical panels. Link devices that sit a few feet apart behind a helm or galley panel.
-
Solar upgrades. Add a new MPPT to an existing GX setup when the new controller sits a short way off.
Choosing The Right Length
The 1.8 m cable sits in the lower-middle of Victron's range, which runs from 0.3 m to 10 m. It reaches farther than the 0.9 m cable, but it still keeps the run short enough to stay tidy.
Pick it when your devices are across a small gap, such as a divider or a corner, and the shortest cable would be a tight stretch. If the path is longer than about 5.9 feet, move up to the 3 m or 5 m cable.
Is This Cable The Right Fit
Start by checking that your device has a VE.Direct port. Victron notes that the Inverter RS, Inverter RS Solar, and Multi RS are the exception: their VE.Direct port is for programming, and a GX device must connect through VE.Can. Next, measure your cable path and compare it with 1.8 m.
This May Be A Good Fit If
- Your devices are a few feet apart in the same enclosure or bay
- You want a little slack for a service loop
- You do not need the right-angle connector
Common Questions
What Does The Victron VE.Direct Cable 1.8 m Connect?
It connects a device with a VE.Direct port to a GX device or another VE.Direct input. Typical devices include MPPT solar chargers and BMV battery monitors. Please confirm your exact model before you order.
Which devices can this cable connect?
Victron's manual lists devices with a VE.Direct port, such as BMV battery monitors, MPPT solar chargers, Orion XS chargers, and Smart IP43 chargers, as devices that can connect directly to a GX device. Check that your device has a VE.Direct port.
Do I need the 1.8 m length or the 3 m length?
Measure the cable path. If it comes in under about 5.9 feet with a little slack, 1.8 m is enough. If it is close, a longer cable avoids a stretched connection.
How Long Is This Cable?
Victron lists it as 1.8 m, which is about 5.9 feet. Victron does not publish a cable weight or diameter for this part.
What's Included
- 1 x Victron VE.Direct Cable 1.8 m
Get The Reach Your System Needs
The Victron VE.Direct Cable 1.8 m is a small part that keeps your power system talking. At Outbound Power, we focus on real-world backup power, RV, marine, and off-grid planning. If you want help choosing the right length or confirming that your devices have the ports they need, the Outbound Power team is happy to help.
Victron VE.Direct Cable 1.8 m Specifications
|
| Product |
| Model |
ASS030530218 |
| Name |
VE.Direct Cable 1,8m |
| Cable |
| Length |
1.8 m (5.9 ft) |
| Connector |
Straight |
| Maximum VE.Direct cable length |
10 m, cannot be extended |
Victron VE.Direct Cable 1.8 m Declaration of Conformity