Rich Solar 400 Watt Solar Kit For Portable Power Stations
We Beat Any Price
Found the same price or less? Just ask & we'll beat it.
Found the same price or less? Just ask & we'll beat it.
The Rich Solar 400 Watt Solar Kit for Portable Power Stations combines four MEGA 100 monocrystalline panels with a 30 ft extension cable pair and a set of 2-to-1 parallel connectors. It is built for recharging portable power stations and solar generators at camp, on the road or during a power outage.
Power stations handle charging internally, so the kit does not include a separate charge controller. Each panel is certified to UL 61730, IEC 61215 and CSA C22.2, is rated for 2,400Pa wind loads and 5,400Pa snow loads, and is backed by a 25-year output warranty.
Each MEGA 100 produces 100W from 9-busbar monocrystalline cells with up to 22.6% efficiency. Four panels give you a 400W array in pieces small enough to carry, set out and stow one at a time.
The panels are certified to UL 61730, IEC 61215 and CSA C22.2. These standards cover panel safety and long-term outdoor performance testing.
With ratings for 2,400Pa wind loads and 5,400Pa snow loads, the panels can stay set up at a long-term campsite or seasonal site through changing weather.
The red and black 10 AWG extension cables have pre-assembled male and female connectors. At 30 ft long, they let you keep the power station in the shade, in a tent or inside an RV while the panels sit in full sun.
Rich Solar includes pre-assembled cables and connection accessories, including one pair of 2-to-1 parallel connectors, so you can connect the array without crimping tools.
Camping. Recharge a large power station during the day to run lights, fans, a cooler and devices at night.
Overlanding. Keep a power station topped up at remote sites between drives.
RVs. Add solar charging for a power station without wiring panels into the RV's electrical system.
Home backup. Recharge a power station during an outage to keep a fridge, router and phones running longer.
Versus the 200 Watt Kit for Portable Power Stations. The 200W kit uses two MEGA 100 panels. The 400W kit doubles the rated array power for power stations with larger solar inputs and batteries.
Versus a folding portable panel. Folding panels pack smaller, but rigid glass panels like the MEGA 100 carry wind and snow load ratings and a 25-year output warranty, which suits longer stays.
Versus two 200W panels. Four 100W panels give the same rated power in lighter pieces that are easier for one person to carry and arrange around shade.
This may be a good fit if
Portable power stations and solar generators manage solar charging internally, so this kit supplies only the panels, cables and parallel connectors. Add a charge controller if you plan to charge a standalone battery.
It depends on your power station's solar input range. Series wiring adds voltage and parallel wiring adds current. Stay within your power station's voltage and current limits, and check its manual before connecting.
No. Mounting hardware is not part of this kit. The panels can be set up on the ground or mounted with brackets sold separately.
Rich Solar provides a 25-year output warranty on the MEGA 100 panels.
The Rich Solar 400 Watt Solar Kit for Portable Power Stations gives you four certified MEGA 100 panels, long extension cables and parallel connectors for quiet, fuel-free recharging. At Outbound Power, we help customers match panels, wiring and adapters to their power stations. If you have questions, our team is happy to help.
Rich Solar 400 Watt Solar Kit for Portable Power Stations Specifications |
|
|---|---|
| Kit | |
| Model | RS-K400G |
| Solar Array | 400W (4 x 100W) |
| Charge Controller | Not included (for power stations and solar generators) |
| Cables | 30 ft 10 AWG red and black extension pair, 2-to-1 parallel connectors |
| MEGA 100 Solar Panel (x4) | |
| Model | RS-M100 |
| Maximum Power (Pmax) | 100W |
| Cell Type | 9-busbar monocrystalline, up to 22.6% efficiency |
| Maximum Power Voltage (Vmp) | 18.6V |
| Maximum Power Current (Imp) | 5.38A |
| Open Circuit Voltage (Voc) | 22.8V |
| Short Circuit Current (Isc) | 5.78A |
| Maximum Series Fuse Rating | 10A |
| Wind and Snow Load | 2,400Pa wind, 5,400Pa snow |
| Dimensions | 39.0 x 21.3 x 1.2 in |
| Weight | 13.2 lbs |
| Certifications | UL 61730, IEC 61215, CSA C22.2 |
| Warranty | 25-year output |
Yes! Outbound Power is an Authorized Dealer for every single brand and product on our store.
Shipping times vary depending on your location and the product or products ordered.
Order Processing Time
Most products are processed within 1-3 business days. If there is a delay in processing your order, we will alert you with as much information as possible about what to expect.
After order processing is complete, you will receive tracking information to monitor your order while it is in transit.
Order Shipping Time
Following processing, it may take between 3 and 8 days to arrive, depending on your location.
Please refer to the product page for your item and reference the estimated delivery time frame for more details.
Additionally, you can see the estimated delivery time frame during checkout and receive a tracking number once your order ships.
Everything on our store ships for free. Really!
Most items may be returned within 30 days of delivery. Please refer to our Returns & Exchanges policy to determine what items are eligible. Returns are not accepted beyond 30 days following delivery.
Everything sold on our website is brand-new.
No — we price BEAT! Please refer to our Price Beat Promise for full details.
Click to apply at checkout
placeholder